Panasonic HHR-P103 Cordless Phone Replacement Battery 3.6V 700mAh
This product is shipped directly from our Manufacturer’s Warehouse and typically takes around 2 weeks to deliver to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Panasonic HHR-P103 Cordless Phone Replacement Battery 3.6V 700mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Panasonic HHR-P103 Cordless Phone Replacement Battery 3.6V 700mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.6V
Amp
700mAh
Panasonic KX-TGA271A / KX-TGA272S Series — 3.6V Ni-MH Replacement Battery (HHR-P103)
This is a 3.6V 700mAh Ni-MH replacement battery for Panasonic cordless phone handsets in the KX-TGA271 and KX-TGA272 series, plus 61 additional compatible models. It replaces OEM part numbers HHR-P103, HHR-P103A, N4HHGMB00001, N4HHGMB00005, and N4HHGMN00001. Dimensions are 47.00 × 32.00 × 11.50mm — check yours before ordering if the compartment is tight.
- KX-TGA271 and KX-TGA272 handset family: These models share the same 3.6V single-cell Ni-MH battery bay, physical clip connector, and base-station charge circuit. One battery part number covers the full range, including the KX-TGA271A, KX-TGA271W, KX-TGA272, and KX-TGA272S variants.
- Bench tested on actual hardware: We cycled this pack through charge and discharge on a Ni-MH compatible test rig, confirming the cell holds voltage within spec across the full discharge curve. The base station handshake completed normally — no charge-error light triggered.
- First-charge protocol for Ni-MH cordless handsets: After installing, seat the handset in the base and leave it for a full 16 hours before the first call. Ni-MH cells in cordless phones arrive partially discharged from storage. Skipping the slow first charge is the leading cause of short talk time complaints in the first week of use.
Talk time shorter than rated after battery swap
Ni-MH cells do not reach full rated capacity on the first cycle. Fresh cells typically deliver 60–75% of rated capacity on cycle one, stepping up with each full charge and discharge. The KX-TGA271 base station delivers a trickle charge once the handset is seated — it does not fast-charge. Allow three to five full cycles before judging capacity. After cycle five, a healthy pack holds 3.6V through most of the discharge curve.
Base station charge light stays red or shows error after new battery installed
A Ni-MH pack stored in a warehouse can drop below the voltage floor the Panasonic base station accepts before starting a charge cycle. The base reads the pack as faulty and stops charging. Remove the handset, wait 30 seconds, then reseat it firmly — the base will retry the charge-start handshake. If the error persists, check that the handset contacts and base cradle contacts are clean and making full metal-to-metal contact; a film of oxidation on either contact blocks the circuit.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Panasonic
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My KX-TGA271A handset shows full bars on the base but goes flat after just a few short calls — what's wrong?
This is a Ni-MH conditioning issue, not a faulty battery. Fresh Ni-MH cells store at a partial charge and need three to five full charge-and-discharge cycles to reach rated capacity. The charge indicator reads voltage at rest, not true capacity, so it shows full even when the cell hasn't been conditioned yet. Run five complete cycles — full 16-hour charge in the base, then use until the handset warns low — before drawing any conclusions about the pack.
The handset lost its pairing with the base after I swapped the battery — how do I get it back?
Removing the battery cuts all power to the handset, which can erase the DECT pairing registration stored in volatile memory on some Panasonic models. Re-register the handset manually: press and hold the locator button on the base for about four seconds until the base beeps, then press the call button on the handset within 90 seconds to complete the pairing. Refer to the last page of your KX-TGA271A manual for the exact key sequence if the model variant differs slightly.
The handset drains completely overnight even when it's sitting in the base — is this the battery or the base?
If the handset goes flat overnight in the cradle, the charge circuit is not completing — the handset is running on the battery, not topping up from the base. Check that the handset clicks fully into the cradle and that both the handset charge contacts and the base cradle pins are free of dust or corrosion. Clean both contact surfaces with a dry cloth, reseat the handset, and confirm the charge indicator light activates within 10 seconds of docking.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





