Uniden EXP1240 Replacement Battery 3.7V 1200mAh Li-ion
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Uniden EXP1240 Replacement Battery 3.7V 1200mAh Li-ion - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Uniden EXP1240 Replacement Battery 3.7V 1200mAh Li-ion - is backordered and will ship as soon as it is back in stock.
Voltage
3.7V
Amp
1200mAh
Uniden EXP1240 / EXP1240H — 3.7V Li-ion Replacement Battery (1000060)
This is a 3.7V, 1200mAh (4.44Wh) lithium-ion battery for the Uniden EXP1240 and EXP1240H cordless phone handsets. It replaces OEM part number 1000060. When the original battery no longer holds a charge through a normal call, this is the direct swap.
- EXP1240 and EXP1240H compatibility: Both handsets share the same battery bay dimensions (53.20 × 34.00 × 5.70mm), connector pinout, and 3.7V charge acceptance. One battery covers both variants without modification.
- Bench tested on actual hardware: We cycled this battery through charge and discharge on EXP1240 hardware. The BMS handled the base station's charge termination signal correctly and did not trip a false full-charge cutoff at low state-of-charge.
- First charge after installation: Seat the handset in the base immediately after installing this battery and leave it for a full 16 hours before first use. Li-ion cells shipped in partial-charge storage state need one complete charge cycle to let the BMS calibrate its capacity register accurately.
Talk time shorter than expected after fitting the new battery
A Li-ion cell arriving from storage is not at full capacity — the BMS has not yet mapped the cell's actual charge curve. The handset's fuel gauge reads the stored register, not the real cell state, so it reports a low percentage even after the first charge. Run two to three full charge and discharge cycles through normal use. By the third cycle the BMS register aligns with actual cell capacity and talk time stabilises.
Handset loses base station pairing after battery replacement
Removing the battery from a DECT handset cuts all power to the registration memory on some Uniden models. The base station and handset lose their shared link key. To re-pair, press and hold the page or find button on the base for five seconds, then follow the handset's on-screen pairing prompt. Once registration completes, confirm the handset shows the base station name or line status at idle.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Uniden
- Manufacturer: CS
- Series: X-Longer
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The base station shows a flashing or error light after I put the new battery in — why won't it charge?
A Li-ion cell shipped in deep storage can sit below the base station's charge acceptance threshold. The base detects a voltage too low to begin its normal charge cycle and flags an error. Place the handset on the base, leave it undisturbed for 30 minutes, and check again — the charger circuit will trickle current into the cell until it crosses the acceptance threshold, after which normal charging begins. If the error light persists past 30 minutes, confirm the battery contacts on the handset are clean and making firm contact with the base pins.
My EXP1240 handset is dead by morning even though I put it back in the base every night — is the battery faulty?
This is almost always a seating issue, not a battery fault. If the handset is even slightly off-centre in the cradle, the charging contacts don't close properly and the handset runs entirely on battery overnight. Remove the handset, wipe the gold contacts on both the handset and base with a dry cloth, then reseat it firmly until you feel or hear it click into position. Confirm the charging indicator light on the handset or base illuminates within 10 seconds of seating.
After the swap, calls drop or sound crackly at distances that worked fine before — what's happening?
RF transmit power in DECT handsets draws a short current spike each time the handset bursts a signal to the base. If the battery voltage sags during that spike — common in the first few cycles before the BMS has calibrated the cell — the handset's transmit circuit under-powers the signal, causing crackle or dropout at range. This resolves after two or three full charge cycles once the cell stabilises above 3.6V under load. If range issues persist beyond the third cycle, check that the battery contacts are seated flat with no debris lifting the cell off the terminal.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.



