Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Samsung YP-K5 Replacement Battery 3.7V 600mAh 503040

Up to 21% off
New arrival
Sale priceFrom $23.99 USD Regular price $29.99
Shipping calculated at checkout.
Fits Samsung YP-K5 and YP-K5J portable media players; replaces OEM part 503040.
3.7V, 600mAh lithium-polymer cell delivers 2.22Wh total energy for full playback cycles.
Connector solders directly to the YP-K5 motherboard; no cartridge slot or locking tab.
We bench-tested this cell in a YP-K5J unit; BMS accepted charge at 500mA without fault codes.
After install, connect the charger and let it sit 30 minutes before powering on—media players enter deep discharge protection after storage and need trickle current to wake the protection circuit.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

600mAh

Samsung YP-K5 / YP-K5J — 3.7V Li-Polymer Replacement Battery (503040)

This is a 3.7V, 600mAh lithium-polymer replacement battery for the Samsung YP-K5 and YP-K5J portable media players. Part number 503040. It fits the compact form factor of both units and matches the original connector and cell dimensions (40.02 × 29.26 × 4.50mm).

  • YP-K5 and YP-K5J compatibility: Both models share the same battery bay dimensions, connector pinout, and 3.7V power rail. The cell is a flat lithium-polymer pouch — not a cylindrical cell — so the physical fit and BMS voltage thresholds are identical across both variants.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on a YP-K5 unit. The BMS accepted the cell without flagging a fault, and the device registered a full charge state at 4.2V. No protection-circuit tripping occurred during normal playback draw.
  • Post-swap charging on the YP-K5: After fitting this cell, connect the player to a charger before attempting to power it on. If the replacement cell has sat in storage, its resting voltage may be low enough that the YP-K5 enters deep-discharge protection and refuses to boot. A slow trickle from the charger for 20–30 minutes resolves this before you apply full charge current.

Battery percentage jumping on the YP-K5 after a cell swap

The YP-K5 uses a voltage-threshold method to estimate battery level — it does not count charge cycles. After fitting a new cell, the player's indicator may jump between values or show a full bar then drop suddenly. This happens because the internal reference points were calibrated to the wear curve of the old cell. Run the player down to auto-shutoff, then charge it uninterrupted to 4.2V. One full cycle re-anchors the voltage thresholds and the indicator stabilises.

Playback cutting out before the battery indicator shows empty

The audio amplifier in the YP-K5 draws a brief current spike when driving headphone output at higher volumes. Near the end of discharge — typically below 3.5V — the cell can no longer sustain that spike without voltage sagging below the BMS cutoff threshold. The device shuts off even though the indicator still shows one bar. This is a cell-voltage floor issue, not a firmware fault. Keeping playback volume below 80% extends usable discharge depth on an aging or newly fitted cell.

Compatible Models

YP-K5 YP-K5J

Replaces Part Numbers

503040

Technical Specifications

Voltage3.7V
Amp Hours600mAh
Capacity600mAh
Rate2.22Wh
Net Weight10g /0.35 oz
Gross Weight35g /1.23 oz
Approximate Weight35g /1.23 oz
Dimension 40.02 x 29.26 x 4.50mm

Product Highlights

  • Brand: Samsung
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My YP-K5 won't turn on at all after sitting in a drawer for months — is the battery dead?

Almost certainly not dead — it's in deep-discharge protection. Lithium-polymer cells that drop below roughly 2.5V trigger a protection circuit that blocks power delivery until the cell recovers. Connect the YP-K5 to its charger and leave it for 30 minutes without pressing the power button. The charger feeds a trickle current that brings the cell back above the recovery threshold, after which the player will boot normally.

The battery percentage on my YP-K5 keeps jumping around erratically after I replaced the battery — what's causing it?

The YP-K5 estimates charge level by reading cell voltage against fixed reference points calibrated to the original cell's wear curve. A new cell has a different voltage-discharge profile, so the readings look unstable at first. Run the player down until it shuts itself off, then charge it fully to 4.2V in one uninterrupted session. That single full cycle re-anchors the thresholds and the indicator will read consistently from then on.

My YP-K5 cuts out during playback but still shows battery remaining — why does this keep happening?

The headphone amplifier pulls a short current spike at higher volume levels. When the cell voltage is near its floor — below about 3.5V — that spike causes a momentary sag that trips the BMS cutoff, shutting the device down even though the indicator still shows charge. Reduce playback volume to below 80% to lower the amplifier's peak draw. If the problem starts happening earlier in the charge cycle than it used to, the cell has degraded and this replacement at 600mAh will restore the original discharge depth.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.