Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Clevo NV40MB Replacement Battery 15.2V 3050mAh

Up to 19% off
New arrival
Sale priceFrom $91.99 USD Regular price $113.99
Shipping calculated at checkout.
Fits Clevo NV40MB, NV40ME, NV40MZ, NV40PZ notebooks; replaces NV40BAT-4-49 and NV40BAT-4-53 cells.
This 15.2V, 3050mAh lithium-ion pack delivers 46.36Wh to sustain full-load runtime on unplugged operation.
Connector slides straight into the bay with a single locking tab; orientation marked on the housing.
We bench-tested this cell on a NV40MB unit; BMS accepted the new pack after first charge cycle completed.
After installation, run one full discharge to hibernation cutoff then charge uninterrupted to 100%—this resets the BIOS battery learn cycle and clears the inaccurate health warning that appears after every cell swap.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

15.2V

Amp

3050mAh

Clevo NV40MB / NV40ME Series — 15.2V Li-ion Replacement Battery (NV40BAT-4-49)

This is a 15.2V, 3050mAh (46.36Wh) Li-ion replacement battery for the Clevo NV40MB, NV40ME, NV40MZ, NV40PZ, and related models. It replaces OEM part numbers NV40BAT-4-49 and NV40BAT-4-53. Install it when the original cell no longer holds charge and the notebook cannot run unplugged.

  • NV40 platform fit: The NV40MB, NV40ME, NV40MZ, and NV40PZ share the same 15.2V four-cell architecture and identical connector pinout. The BMS handshake protocol and EEPROM data structure are consistent across these variants, so one cell works across the full NV40 range.
  • Bench tested on actual hardware: We cycled this cell through full charge and discharge on an NV40 platform. The BMS accepted charge correctly, cell voltage held stable under combined CPU and display load, and no protection trips occurred during the test.
  • Post-install calibration on the NV40: After fitting this cell, run one full discharge to hibernate-cutoff, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the inaccurate health warning the firmware throws after every cell swap on this platform.

BIOS reporting battery health as poor after replacing the NV40 cell

The NV40 BIOS reads health data from the EEPROM on the battery's BMS board, not from live voltage measurements. When a new cell is installed, the EEPROM values from the old, degraded cell are still referenced until a learn cycle overwrites them. This causes the firmware to flag poor health even on a brand-new battery. Run one complete discharge-to-hibernate followed by an uninterrupted full charge — that sequence forces the BIOS to rewrite the battery profile and clear the warning.

Laptop shuts down at 20–30% shown on the NV40 fuel gauge

This happens because the fuel gauge IC maps percentage to voltage using calibration data from the old cell. The new cell has a slightly different discharge curve, so what the gauge calls 25% may already be at the voltage floor under full CPU and display load. The cell cannot sustain output voltage through that load spike, so the protection circuit cuts power before the display gauge reaches zero. Run two full calibration cycles — full discharge to hibernate-cutoff, full charge to 100% — to let the fuel gauge IC relearn the actual voltage-to-capacity curve on the new cell.

Compatible Models

NV40MB NV40ME NV40MZ NV40PZ NV41MB NV41ME NV41MZ NV41PZ NV41RZ NV45PZ NV415A NV415B NV451B

Replaces Part Numbers

NV40BAT-4-49 NV40BAT-4-53

Technical Specifications

Voltage15.2V
Amp Hours3050mAh
Capacity3050mAh
Rate46.36Wh
Net Weight215g /7.58 oz
Gross Weight475g /16.76 oz
Approximate Weight475g /16.76 oz
Dimension 260.20 x 80.60 x 7.10mm

Product Highlights

  • Brand: Clevo
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The NV40 BIOS shows 0% or "unknown" battery immediately after I installed the new cell — is the battery dead?

No. The BIOS is reading stale EEPROM data written by the old degraded cell, not the actual charge state of the new one. Boot into Windows or Linux with the charger connected and let the battery charge to 100% uninterrupted. Then discharge fully to hibernate-cutoff and charge back to 100% — after that cycle the BIOS rewrites the battery profile and the 0% or unknown reading clears.

Windows is showing the new battery as 46Wh but the system info page in the Clevo control panel shows a different Wh figure — which is correct?

The Clevo control panel reads the rated Wh value stored in the battery's EEPROM, which reflects the original OEM cell specification. Windows calculates Wh from live voltage and current readings against the actual cell chemistry. The 46.36Wh figure from the physical cell is accurate. The EEPROM figure is a static value carried over from the original battery profile and does not indicate a fault.

The NV40 stops charging at 80% and won't go higher — is the new battery faulty?

This is almost always a BIOS-controlled charge limit, not a battery fault. Clevo's firmware on some NV40 builds ships with a battery conservation mode enabled that caps charging at 80% to reduce cell stress during long plugged-in sessions. Open the Clevo Control Center application, navigate to the battery settings, and disable the charge limit or set the threshold to 100%.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.