Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Ecom 39a-Ex Replacement Battery 3.7V 1700mAh Li-Polymer

Up to 20% off
New arrival
Sale priceFrom $29.99 USD Regular price $36.99
Shipping calculated at checkout.
Fits Compaq iPAQ 39a-Ex; replaces OEM battery part 233488-001.
3.7V, 1700mAh lithium-polymer cell restores full charge capacity to aging iPAQ units.
Connector and locking tab match original iPAQ battery slot without modification or adapter.
Bench testing showed stable BMS voltage curve on first charge with no early cutoff signals.
Sync all open files and application data to your host computer before removing the old battery—iPAQ RAM loses power immediately when the cell disconnects, erasing unsaved work and settings.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1700mAh

Ecom 39a-Ex — 3.7V Li-Polymer Replacement Battery (233488-001)

This 3.7V 1700mAh Li-Polymer battery replaces the OEM cell in the Ecom iPAQ 39a-Ex rugged handheld PDA. It fits the 39a-Ex directly using OEM part number 233488-001. Over time, Li-Polymer cells lose charge-holding capacity through normal cycling — this replacement restores full power to the device.

  • 39a-Ex platform fit: The 39a-Ex uses a 3.7V Li-Polymer cell with a BMS handshake tied to OEM part 233488-001. The connector pinout and voltage rail match the original, so the device firmware recognises the replacement without any error state.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on the 39a-Ex platform. The BMS accepted full charge to 4.2V, held the low-voltage cutoff correctly, and reported charge state accurately to the OS throughout the test.
  • Pre-removal sync requirement: Perform a full ActiveSync or WMDC data sync to the host PC before pulling the battery. The 39a-Ex holds open application state and unsaved data in SRAM, which is powered entirely by the main battery — any power break without syncing first can result in data loss.

Why the 39a-Ex won't boot after a new battery is installed

A freshly shipped Li-Polymer cell typically arrives at storage charge — around 3.6V to 3.8V. The 39a-Ex boot sequence draws a short current spike that can trip the BMS if the cell voltage is below the device's minimum boot threshold. The unit appears dead but is not faulty. Charge the new battery for at least 30 minutes before attempting the first boot.

Battery life shorter than expected during active warehouse scanning

The 39a-Ex in active scanning use draws significantly more current than in standby — the barcode scanner LED and any active wireless radio (Wi-Fi or Bluetooth) together can triple the average current draw versus idle. A 1700mAh cell that looks adequate on paper will deplete faster than expected under continuous scan cycles. If runtime drops sharply, check whether the wireless radio is left on between scans, as disabling it when not actively syncing reduces draw noticeably. Monitor battery percentage after a standard shift to establish a real-world baseline.

Compatible Models

39a-Ex

Replaces Part Numbers

233488-001

Technical Specifications

Voltage3.7V
Amp Hours1700mAh
Capacity1700mAh
Rate6.29Wh
Gross Weight100g /3.53 oz
Approximate Weight100g /3.53 oz

Product Highlights

  • Brand: Ecom
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

I swapped the battery on my 39a-Ex and now all my open data is gone — what happened?

The 39a-Ex stores active application state and unsaved data in SRAM, which runs directly off the main battery. The moment the old cell is disconnected, that memory loses power and the data is gone — there is no backup capacitor to bridge the gap. Always do a full ActiveSync or Windows Mobile Device Center sync to your host PC before removing the battery. After the swap, restore from that sync and the device will return to its last backed-up state.

My 39a-Ex wireless sync keeps dropping or running slowly right after fitting the replacement battery — what's causing it?

The Wi-Fi radio in the 39a-Ex is voltage-sensitive and draws a high burst of current when maintaining an active connection. If the replacement cell is not at full charge, voltage sag under radio load can cause the connection to drop or throttle. Charge the battery fully to 4.2V before attempting any wireless sync. Once fully charged, run the sync again — the issue will not persist if the cell is healthy.

The 39a-Ex is reading the new battery as low charge almost immediately after a full charge — is the battery faulty?

This is usually a fuel gauge calibration issue, not a defective cell. The 39a-Ex gas gauge learns from charge and discharge history — after a battery swap, it has no history and can misread state-of-charge significantly. Run one complete charge-to-full, then use the device under normal load until the low-battery warning triggers, then charge again fully. After one or two of these full cycles, the gauge recalibrates and the readings stabilise.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.