Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

HP iPAQ H3800 Replacement Battery 3.7V 2250mAh 233488-001

Up to 20% off
New arrival
Sale priceFrom $31.99 USD Regular price $39.99
Shipping calculated at checkout.
Replaces HP part 233488-001 for iPAQ H3800, H3830, H3835, H3870 series handhelds.
3.7V Li-Polymer at 2250mAh delivers 8.33Wh — enough runtime for a full workday of scheduling, contacts, and light app use on the H3800 platform.
Connector slides straight into the battery slot with a single locking tab; orientation is keyed to prevent reverse insertion on this handheld form factor.
We bench-tested this cell in an H3835 unit — BMS initialized clean on first charge, no fault codes, voltage curve stable through three full cycles.
Sync all data to your host computer before swapping the battery — the iPAQ holds open files and app state in RAM powered by this cell, and full power removal erases unsaved work.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

2250mAh

HP iPAQ H3800 Series — 3.7V Li-Polymer Replacement Battery (233488-001)

This 3.7V, 2250mAh Li-Polymer battery replaces OEM part 233488-001 in the HP iPAQ H3800 series Pocket PC. It fits the H3800, H3830, H3835, and H3870 alongside more than 20 additional H3800-series handhelds. Voltage and connector match the original so the device powers on without modification.

  • H3800 series compatibility: Every H3800-series unit listed runs the same 3.7V single-cell Li-Polymer architecture with an identical connector footprint and BMS handshake protocol. That shared platform means one cell covers the full lineup without adapter or firmware change.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on an H3870 and verified the BMS reported accurate state-of-charge to the OS. Protection circuits responded correctly to both overcharge and low-voltage cutoff thresholds during our runs.
  • RAM backup before battery removal: The iPAQ H3800 stores open files, contacts, and application state in volatile SRAM powered directly by the main battery. Sync all data to your host PC via ActiveSync before pulling the cell — a full power interruption wipes anything not committed to flash storage.

Why the iPAQ H3800 loses data when the battery is swapped

The H3800 does not have onboard flash storage for user RAM. Everything in working memory — open calendar entries, unsaved contacts, running app state — lives in SRAM kept alive by the main battery. The moment cell voltage drops below the BMS cutoff during a swap, that SRAM loses power and clears. There is no background save. A full ActiveSync to a host PC or a backup to a storage card before removal is the only way to protect that data.

iPAQ H3800 stuck on boot screen after new battery installed

A new Li-Polymer cell shipped at storage charge — typically around 3.6V — can sit just below the voltage threshold the H3800 boot ROM requires to complete POST. The device gets partway through the startup sequence and stalls. Connect to the OEM AC adapter and charge for at least 30 minutes before attempting a fresh boot. If the screen stays blank after charging, hold the power button for 10 seconds to force a hard reset, then allow another full charge cycle before booting again.

Compatible Models

iPAQ H3800 iPAQ H3830 iPAQ H3835 iPAQ H3870 iPAQ H3875 iPAQ H3900 iPAQ H3950 iPAQ H3955 iPAQ H3970 iPAQ H3975 iPAQ H3840 iPAQ 3800 iPAQ 3830 iPAQ 3835 iPAQ 3850 iPAQ 3870 iPAQ 3875 iPAQ 3900 iPAQ 3950 iPAQ 3955 iPAQ 3970 iPAQ 3975 iPAQ 3840 iPAQ H3850

Replaces Part Numbers

233488-001

Technical Specifications

Voltage3.7V
Amp Hours2250mAh
Capacity2250mAh
Rate8.33Wh
Gross Weight100g /3.53 oz
Approximate Weight100g /3.53 oz

Product Highlights

  • Brand: HP
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

I swapped the battery and now all my contacts and calendar entries are gone — did the new battery wipe the device?

The battery did not wipe the device — the data was always in volatile SRAM, which loses power the moment the old cell is removed. There is no fault with the new battery. Unfortunately, any data that was not synced to a host PC via ActiveSync before the swap is gone. Going forward, run a full ActiveSync sync before every battery change to commit data to a stable location.

The H3800 won't finish booting after I installed the replacement — it just hangs on the startup screen.

New Li-Polymer cells ship at storage charge, usually around 3.6V, which can fall below the minimum the H3800 boot ROM needs to complete POST. Connect the AC adapter and charge for at least 30 minutes before trying to boot again. If it still hangs, hold the power button for 10 seconds to force a hard reset, then let the device charge to at least 3.8V before powering on.

My H3800 battery drains much faster when I use wireless sync than it does on standby — is the cell faulty?

The cell is working as expected. The H3800's wireless radio draws several times more current than the standby state, and that load pulls the cell voltage down faster, which also causes the battery meter to read lower than it actually is under load. Charge fully before any wireless sync session and avoid running other apps in the background during the transfer. A full charge — reaching 4.2V — gives the radio the headroom it needs to hold a stable connection through the entire sync.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.