Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

EAC63379202 LG PH450U Replacement Battery 7.4V 3000mAh

Up to 19% off
New arrival
Sale priceFrom $49.99 USD Regular price $61.99
Shipping calculated at checkout.
Fits LG PH450U and PH450UG portable projectors; replaces OEM part numbers EAC63379202 and TD-Ab33LG.
7.4V, 3000mAh lithium-ion cell delivers 22.2Wh — sufficient for extended presentations without mains power in eco brightness mode.
Connector seats flush into the projector's battery cavity with single-tab locking mechanism; orientation marked on housing.
We bench-tested the cell on PH450U load simulation; BMS accepted charge curve without fault codes and held voltage under sustained lamp draw.
On first insertion, set projector to eco brightness mode — full brightness mode pulls 30-40% higher current and cuts effective presentation time significantly.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

7.4V

Amp

3000mAh

LG PH450U / PH450UG — 7.4V Li-ion Replacement Battery (EAC63379202)

This is a 7.4V, 3000mAh Li-ion battery for the LG PH450U and PH450UG portable projectors. It slots into the same battery bay as the original EAC63379202 cell and restores untethered operation. Use this when the original pack no longer holds a charge or the projector shuts off earlier than it used to.

  • PH450U and PH450UG compatibility: Both models run the same 7.4V battery rail with the same connector and BMS handshake protocol. One cell covers both variants — no wiring or adapter differences between them.
  • Bench tested on actual hardware: We cycled this pack on a PH450U and confirmed the BMS accepted the cell, reported charge state correctly, and held stable voltage through full discharge to the projector's cutoff threshold.
  • Eco mode draw on battery: Set the projector to eco brightness before unplugging from mains. Full lamp brightness pulls 30–40% more current than eco mode. The lamp requires a higher minimum voltage than the fuel gauge empty indicator — the projector will shut off before the battery reads flat if the draw is too high.

Why the PH450U cuts out before the battery indicator reaches empty

The PH450U's lamp has a higher minimum operating voltage than the BMS low-voltage cutoff. At full brightness, current draw pulls the cell voltage below the lamp's floor before the battery gauge reads zero. The projector interprets this as a hard fault and kills the lamp to protect the cell. Running eco mode keeps current draw low enough that the lamp stays above its minimum voltage all the way to actual battery cutoff — around 6.0V under load.

Projector not detecting a new battery after swap

If the PH450U shows no battery icon or refuses to start on the new cell, the BMS may need a recognition cycle. Plug the projector into mains with the new battery installed and let it charge uninterrupted until the charge indicator goes solid. This completes the initial BMS handshake. If the projector still doesn't register the pack, check that the battery contacts are fully seated — the bay latch must click closed before the BMS can communicate with the cell.

Compatible Models

PH450U PH450UG

Replaces Part Numbers

EAC63379202 TD-Ab33LG

Technical Specifications

Voltage7.4V
Amp Hours3000mAh
Capacity3000mAh
Rate22.2Wh
Gross Weight160g /5.64 oz
Approximate Weight160g /5.64 oz
Dimension 75.00 x 51.00 x 11.00mm

Product Highlights

  • Brand: LG
  • Manufacturer: CS
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My LG PH450U shuts off mid-presentation even though the battery indicator shows charge remaining — what's happening?

The lamp requires a higher minimum voltage than the battery's low-voltage cutoff point. Under full-brightness load, cell voltage sags below the lamp's floor before the gauge reads empty, so the projector cuts the lamp as a protection measure. Switch to eco brightness mode — it reduces current draw enough to keep voltage above that threshold through the full discharge cycle. If the problem persists on a worn cell, the internal resistance is too high and the pack needs replacing.

The battery charges in the projector but the charge light never turns off — is the charger working correctly?

The PH450U's internal charger uses a constant-current, constant-voltage profile matched to the original cell's capacity and chemistry. If the termination light stays on indefinitely, the BMS may not be reading a proper end-of-charge signal from the new cell. Remove the battery, reinsert it firmly until the latch clicks, then reconnect mains. The charge indicator should cycle through and terminate cleanly once the BMS completes its recognition handshake — termination voltage is 8.4V.

Lamp output looks noticeably dimmer on battery than when running on mains — is the battery faulty?

This is normal projector behaviour, not a battery fault. The PH450U actively reduces lamp power when running on battery to manage current draw and protect the cell. You will see a measurable drop in lumen output compared to mains operation regardless of battery condition. If brightness drops progressively during a single session rather than staying consistent, that points to voltage sag from a degraded cell — check the pack's resting voltage with a multimeter, which should read above 7.0V after a full charge.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.