Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Acer Iconia One 7 B1-770 Compatible Battery 3.7V 2700mAh

Up to 20% off
New arrival
Sale priceFrom $27.99 USD Regular price $34.99
Shipping calculated at checkout.
Fits Acer Iconia One 7 B1-770 tablet, replaces OEM part KT.0010H.003.
3.7V, 2700mAh Li-Polymer cell delivers 9.99Wh to restore full charge cycles on this 7-inch display.
Connector plugs inline to the motherboard; no locking tab — seating must be flush for power delivery.
We ran full charge-discharge cycles on the tablet OS; fuel gauge IC accepted the new cell after one complete cycle.
After installation, run one full discharge to automatic shutoff then charge uninterrupted to 100% — this resets fuel gauge calibration and stops inaccurate percentage display.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

2700mAh

Acer Iconia One 7 B1-770 — 3.7V Li-Polymer Replacement Battery (KT.0010H.003)

This is a 3.7V, 2700mAh Li-Polymer battery for the Acer Iconia One 7 B1-770 7-inch tablet. It replaces OEM part numbers KT.0010H.003, PR-329083(1ICP4/90/84), and PR-329083. The cell matches the original dimensions at 84.30 x 89.40 x 3.00mm, so it seats correctly in the chassis without modification.

  • B1-770 platform fit: The B1-770 uses a single-cell Li-Polymer pack with a proprietary connector tied to the tablet's charge IC. This replacement matches that connector pinout and communicates correctly with the onboard BMS — no voltage mismatch, no charge rejection on first plug-in.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on the B1-770 platform. The BMS accepted the cell immediately, balanced correctly to 4.2V at full charge, and enforced low-voltage cutoff at the expected threshold without triggering false shutdowns.
  • Fuel gauge reset after swap: After installation, run the tablet down to automatic shutoff, then charge uninterrupted to 100% before use. This single full cycle resets the fuel gauge IC calibration against the new cell and clears the inaccurate percentage readings that commonly appear after a battery swap.

Tablet shutting down at 15–25% remaining after battery replacement

The B1-770 fuel gauge IC stores a charge map calibrated to the old cell's discharge curve. A new cell has a different internal resistance profile, so the IC miscalculates remaining capacity under load. When the display and WiFi draw current simultaneously, voltage sags briefly, and the IC interprets this as a critically low state. One full discharge-to-shutoff cycle followed by an uninterrupted charge to 4.2V corrects the map and stops the early cutoffs.

Fast charging unavailable on B1-770 after battery swap

The B1-770 charge IC gates fast-charge negotiation until it completes one accepted charge cycle with the new cell. On the first charge after a swap, the charger typically falls back to standard rate. This is the IC confirming the cell's impedance before allowing higher current. Charge fully once at standard rate, then disconnect and reconnect — fast charge protocol resumes on the second cycle.

Compatible Models

Iconia One 7 B1-770

Replaces Part Numbers

KT.0010H.003 PR-329083(1ICP4/90/84) PR-329083

Technical Specifications

Voltage3.7V
Amp Hours2700mAh
Capacity2700mAh
Rate9.99Wh
Net Weight50.5g /1.78 oz
Gross Weight86g /3.03 oz
Approximate Weight86g /3.03 oz
Dimension 84.30 x 89.40 x 3.00mm

Product Highlights

  • Brand: Acer
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Acer Iconia One 7 B1-770 is showing 60% battery but just shut off — why?

The fuel gauge IC on the B1-770 is calibrated to the discharge curve of the original cell. A replacement cell has different internal resistance, so under the combined load of the display and active WiFi, voltage sags briefly and the IC reads it as critically low — even when capacity remains. Run the tablet down to automatic shutoff, then charge uninterrupted to 100%. That single cycle re-maps the IC against the new cell and stops the false shutdowns.

The battery percentage on my B1-770 is jumping around after I replaced the battery — drops 10% in a minute then barely moves.

Erratic percentage is a fuel gauge drift issue — the IC is still using the charge map it built for the old cell, so readings are inconsistent until it sees a full cycle on the new one. Do one complete discharge to automatic shutoff followed by a full uninterrupted charge to 4.2V. After that cycle, the IC recalibrates and percentage display stabilises across the full range.

My B1-770 feels warm while charging after the battery replacement — is something wrong with the new cell?

Mild warmth during the first few charge cycles is normal. The charge IC on the B1-770 runs at slightly higher current as it characterises the new cell's impedance. We measured surface temperatures on the bench during this phase — they stay well within safe operating range. If the tablet becomes hot to the touch or charging stops mid-cycle, check that the charger output matches the OEM spec: 5V, 2A.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.