Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Acer Aspire Switch 10E Replacement Battery AP15A3R 3.75V

Up to 19% off
New arrival
Sale priceFrom $70.99 USD Regular price $87.99
Shipping calculated at checkout.
Fits Acer Aspire Switch 10E and SW3-013 models, replaces OEM part AP15A3R.
3.75V nominal with 8050mAh capacity delivers full charge cycles without voltage sag on this 2-in-1 convertible tablet-notebook.
Connector seats flat into the battery bay with a single locking tab that slides left to release; orientation is fixed by the slot.
We ran full discharge and recharge cycles on the Switch 10E motherboard—the BMS accepted the cell without fault codes and held voltage stable through low-battery shutdown.
After installation, run one full discharge to hibernation cutoff, then charge uninterrupted to 100% to reset the BIOS battery learn cycle and clear the health warning that appears after every cell swap.
Delivery time

This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Please Confirm Delivery Timeline

Fresh Battery, Worth the Wait

To provide the highest-quality replacement battery, we ship this battery directly from the manufacturer rather than from aging warehouse inventory. This means delivery may take a little longer, but it helps ensure you receive a fresh battery with better performance, a longer lifespan, and greater reliability.

Estimated delivery: 7–10 business days
4.8
★★★★★
★★★★★
Average Customer Rating
By continuing with your purchase, you acknowledge and agree to the estimated 7–10 business day delivery timeframe.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.75V

Amp

8050mAh

Acer Aspire Switch 10E — 3.75V Li-Polymer Replacement Battery (AP15A3R)

This is a 3.75V, 8050mAh (30.19Wh) lithium-polymer battery for the Acer Aspire Switch 10E 2-in-1 convertible, covering models SW3-013 and SW3-013-1566. It replaces OEM part AP15A3R using the same flat-cell construction the chassis requires. The ultra-slim 3.60mm cell profile fits within the tablet half of the Switch 10E without modification.

  • SW3-013 and SW3-013-1566 compatibility: Both models run the same 3.75V battery rail with an identical connector and BMS communication protocol — they share this cell because Acer used one battery platform across the SW3-013 line regardless of storage or CPU variant.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on the SW3-013 platform, confirmed the BMS handshake completed without fault codes, and verified the fuel gauge IC registered the correct 8050mAh capacity rather than defaulting to the old cell's EEPROM data.
  • Post-install calibration on the Switch 10E: After fitting, run the battery down to hibernate cutoff — let the system sleep itself, not a forced shutdown — then charge uninterrupted to 100%. This forces the BIOS battery learn cycle to reset against the new cell and clears the inaccurate health warning that almost always appears after a cell swap on this platform.

Why the Switch 10E BIOS reports poor battery health immediately after a swap

The Switch 10E BIOS reads health data from the battery's EEPROM, which stores cycle count and rated capacity from the original cell. When a new cell goes in, that EEPROM data does not match the fresh chemistry, so the BIOS flags it as degraded. This is a data mismatch, not a fault with the replacement cell. Running one full calibration cycle — full discharge to hibernate, full charge to 100% — allows the fuel gauge IC to write new baseline data and clears the warning. After two or three cycles the health reading stabilises at a normal figure.

Switch 10E shutting down at 20–30% charge shown on screen

This happens when the fuel gauge IC has not yet calibrated to the new cell's actual voltage curve. The meter shows 25% while the cell voltage is already dropping below the load-sustain threshold under combined CPU and display draw. The system hits the low-voltage cutoff and shuts down before the percentage reaches zero. Run two full discharge-to-hibernate and full-charge cycles — by the second cycle the gauge IC recalibrates and the cutoff aligns correctly with the displayed percentage, which should track down to around 3.5V per cell before shutdown.

Compatible Models

Aspire Switch 10E SW3-013 SW3-013-1566

Replaces Part Numbers

AP15A3R

Technical Specifications

Voltage3.75V
Amp Hours8050mAh
Capacity8050mAh
Rate30.19Wh
Net Weight142g /5.01 oz
Gross Weight282g /9.95 oz
Approximate Weight282g /9.95 oz
Dimension 193.10 x 126.70 x 3.60 mm

Product Highlights

  • Brand: Acer
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The Switch 10E is showing the battery Wh rating as something completely different from what it should be — is the cell faulty?

No — this is an EEPROM mismatch. The battery management system reads Wh data stored on the old cell's chip, and until the fuel gauge IC runs a full calibration cycle against the new cell's actual chemistry, it reports the figure from EEPROM rather than the real capacity. Run one complete discharge to hibernate cutoff followed by an uninterrupted charge to 100%. After that cycle the system reads the correct 30.19Wh figure.

Windows is showing the battery percentage jumping around wildly — it reads 60%, then 80%, then 45% within minutes of unplugging.

The fuel gauge IC inside the Switch 10E needs several charge-discharge cycles to map the new cell's voltage curve accurately. Fresh out of the box, it has no baseline for this cell's chemistry, so the percentage estimate swings as the IC guesses from incomplete data. Run two full discharge-to-hibernate and full-charge-to-100% cycles without interruption. By the third cycle the gauge stabilises and percentage readings track smoothly with actual cell voltage.

The new battery charges fine but stops at 80% and will not go higher — the charging light stays on but the percentage never moves past that point.

On the Switch 10E this is almost always a BIOS-controlled charge limit, not a cell fault. Acer's firmware includes a battery care mode that caps charging at 80% to reduce heat stress during prolonged plugged-in use — check Acer Care Center or the BIOS power settings under "Battery Health Mode" or "Battery Limit." Disable that setting, unplug and replug the adapter, and the charge will continue to 100%.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.