Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Amazon Kindle Paperwhite 2014 S2011-003-A Replacement Battery 3.7V 1600mAh

Up to 21% off
New arrival
Sale priceFrom $30.99 USD Regular price $38.99
Shipping calculated at checkout.
Fits Amazon Kindle Paperwhite 2014 and Kindle Touch 6" 2014 models, replacing OEM part S2011-003-A.
3.7V, 1600mAh delivers the charge capacity original to this e-reader without overvoltage stress to the logic board.
Connector slides into the battery slot with a single locking tab—no adhesive strips required for reinstallation.
We bench-tested the cell with Kindle firmware loaded; BMS accepted the new pack on first power-up without cutoff codes.
After installation, charge via USB for a full cycle before heavy reading—the e-reader firmware recalibrates battery percentage display against the new cell.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1600mAh

Amazon Kindle Paperwhite 2014 Version — 3.7V Li-ion Replacement Battery (S2011-003-A)

This 3.7V, 1600mAh Li-ion cell replaces the original battery in the Amazon Kindle Paperwhite 2014 (EY21), Kindle Touch 6" 2014, and Kindle Touch 3G 6" 2014. It matches OEM part numbers S2011-003-A, MC-354775-03, 58-000008, and S2011-003-S. Dimensions are 91.80 x 58.00 x 4.00mm — a direct physical match for the original battery bay.

  • EY21 and Kindle Touch 6" 2014 platform: These three models share the same battery bay geometry, connector pinout, and 3.7V voltage rail. The firmware on each communicates directly with the cell's protection circuit, so the cell swap requires no configuration changes.
  • Bench tested on actual hardware: We ran this cell on a Kindle Paperwhite 2014 unit. The BMS accepted the new cell without error, charge acceptance was normal across the full cycle, and the protection circuit tripped correctly at the low-voltage cutoff threshold.
  • Post-swap charging on the Kindle Paperwhite: After installing, charge via micro-USB for a complete cycle before reading. The Kindle's firmware recalibrates its battery percentage display to the new cell during that first full charge — skipping it causes the percentage indicator to read inaccurately for days.

Battery percentage jumping after a cell swap on the Kindle Paperwhite 2014

The Kindle Paperwhite 2014 stores charge curve data for the original cell in firmware. When a new cell goes in, the stored curve no longer matches actual cell behaviour. The firmware recalibrates by sampling voltage at rest and under load across a full charge-discharge cycle. Until that cycle completes, the percentage display will jump — this is normal and not a fault with the cell.

Page turn response slow immediately after battery replacement

E-ink displays draw a brief surge of current to refresh the screen on each page turn. If the new cell arrived at a low storage voltage, that surge causes a momentary voltage sag the processor detects as a low-power condition. The device throttles refresh speed to protect the display pipeline. Connect to a charger and bring the cell above 3.9V — page turn speed will return to normal without any settings change.

Compatible Models

Kindle Paperwhite 2014 Version EY21 Kindle Touch 6" 2014 Version Kindle Touch 3G 6" 2014 Version

Replaces Part Numbers

S2011-003-A MC-354775-03 58-000008 S2011-003-S

Technical Specifications

Voltage3.7V
Amp Hours1600mAh
Capacity1600mAh
Rate5.92Wh
Net Weight34g /1.20 oz
Gross Weight84g /2.96 oz
Approximate Weight84g /2.96 oz
Dimension 91.80 x 58.00 x 4.00mm

Product Highlights

  • Brand: Amazon
  • Manufacturer: CS
  • Series: X-Longer
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Kindle Paperwhite 2014 won't turn on after I swapped the battery — did I get a dead cell?

Most new cells ship at storage voltage, typically around 3.6–3.7V, which can fall below the Kindle's minimum boot threshold if the cell sat in a warehouse for months. Connect the micro-USB charger and leave it plugged in for 10 minutes without pressing the power button. The device will begin charging silently before the screen activates. If the charging indicator appears within that window, the cell is fine.

The low battery warning shows up immediately after fitting the new cell, even though it's brand new — what's going on?

The Kindle's firmware reads the cell voltage on first boot and compares it against a calibrated threshold. A cell at storage voltage reads as low to the firmware, triggering the warning. This is not a fault — charge the device to 100% in one uninterrupted session and the warning clears. The percentage display will also stabilise after that first full charge cycle.

WiFi sync is draining this battery much faster than I expected — is the cell underperforming?

WiFi draw on the Kindle Paperwhite 2014 is significantly higher than e-ink display refresh — the radio pulls a sustained current the 1600mAh cell feels. If automatic sync is set to run in the background, the cell depletes faster than reading-only use suggests it should. Go to Settings → Wi-Fi & Bluetooth and disable automatic wireless — turn it on manually only when downloading books.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.