Asus Fonepad 7 FE171MG Replacement Battery 3.8V 3900mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Asus Fonepad 7 FE171MG Replacement Battery 3.8V 3900mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Asus Fonepad 7 FE171MG Replacement Battery 3.8V 3900mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.8V
Amp
3900mAh
Asus Fonepad 7 FE171MG — 3.8V Li-Polymer Replacement Battery (C11P1412)
This is a 3.8V 3900mAh Li-Polymer battery for the Asus Fonepad 7 FE171MG and related 7-inch Android tablet models. It replaces OEM part numbers C11P1412 and 0B200-01260000. Fit models include the FE175CG, FE170CG, and ME175CG series.
- FE171MG / ME175CG series fit: These models share a common battery bay size, connector pinout, and BMS handshake protocol — the C11P1412 cell services the entire group without modification or adapter.
- Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the FE171MG. The BMS negotiated correctly with the charge IC, accepted full current from the outset, and reported state-of-charge without error after one calibration cycle.
- Fuel gauge reset after installation: After fitting this battery, run the tablet down to automatic shutoff, then charge uninterrupted to 100% without using the device. This resets the fuel gauge IC against the new cell's actual capacity curve and clears the inaccurate percentage readings that appear immediately after a swap.
Why the Fonepad 7 shuts down between 15–25% after a battery swap
The Fonepad 7 runs a combined load from its display, cellular radio, and Wi-Fi stack simultaneously. Under that combined draw, voltage drops faster than the fuel gauge IC predicts — because the IC is still calibrated to the old cell's discharge curve. The result is an abrupt shutdown that appears to happen at 15–25% remaining, even though the new cell has capacity left. One full discharge-to-shutoff cycle followed by an uninterrupted charge to 100% recalibrates the IC and eliminates these premature cutoffs.
Fast charging not available after fitting the C11P1412
The Fonepad 7's charge controller uses a handshake sequence to verify the connected cell before enabling higher charge rates. On a fresh battery swap, this handshake sometimes fails on the first cycle because the IC has no prior charge history for the new cell. The fix is straightforward: complete one full standard charge to 100% using the original Asus adapter. After that first accepted cycle, the controller recognises the cell and fast charge rates become available again on subsequent sessions.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Asus
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Fonepad 7 FE171MG is showing 60% battery but just switched itself off — what's happening?
The fuel gauge IC in the Fonepad 7 is calibrated to the discharge curve of the old, degraded cell. When a new 3900mAh cell is fitted, the IC's voltage-to-percentage mapping is wrong, so it reports incorrect remaining charge and allows a shutdown well before the cell is empty. Run the tablet down to automatic shutoff from a full charge, then charge it uninterrupted to 100% without using it during that charge. That single cycle resets the IC against the new cell and the reported percentage will track accurately from that point.
The battery percentage on my FE171MG drops from 100% to around 80% within minutes of unplugging — is the new battery faulty?
This is fuel gauge drift, not a faulty cell. The charge IC recorded 100% based on the old cell's charge profile, so the new cell's first few percentage points read disproportionately fast. We confirmed this on the bench — the cell itself holds its rated 3900mAh capacity. Complete one full discharge to automatic shutoff and then a single uninterrupted charge to 100%. The IC recalibrates against the new cell's actual capacity and the drop from full charge normalises immediately.
The Fonepad 7 feels warm near the back during charging after I replaced the battery — should I be concerned?
Mild warmth near the charging coil area is normal during the first few charge cycles on a new Li-Polymer cell. The charge IC applies a slightly higher current during the initial bulk-charge phase while it builds a profile for the new cell, and that generates a small amount of heat. If the tablet becomes hot to the touch or the charging stops and restarts repeatedly, disconnect it and check that the connector is fully seated. Normal charging warmth resolves after two or three complete cycles once the charge IC settles into its standard profile.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




