Samsung Galaxy Tab E SM-T567 EB-BT567ABA Replacement Battery 3.8V 6000mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Samsung Galaxy Tab E SM-T567 EB-BT567ABA Replacement Battery 3.8V 6000mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Samsung Galaxy Tab E SM-T567 EB-BT567ABA Replacement Battery 3.8V 6000mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.8V
Amp
6000mAh
Samsung Galaxy Tab E SM-T567 — 3.8V Li-Polymer Replacement Battery (EB-BT567ABA)
This is the 3.8V, 6000mAh Li-Polymer replacement battery for the Samsung Galaxy Tab E 9.6-inch tablet. It fits SM-T567, SM-T567V, SM-T560NU, and the Galaxy Tab E 9.6 XLTE. OEM part number EB-BT567ABA, also cross-referenced as GH43-04535A.
- SM-T567 and SM-T560NU compatibility: These models share the same battery bay geometry, connector pinout, and 3.8V charge regulation circuit. The BMS on each unit uses the same communication protocol, so the fuel gauge IC reads cell state correctly across both variants without any hardware modification.
- Bench tested on actual hardware: We cycled this cell through charge and discharge on the SM-T567V platform. The BMS accepted the new cell on the first charge cycle, reported cell voltage accurately at full charge (4.35V), and triggered low-voltage cutoff cleanly without false shutdowns.
- Fuel gauge recalibration after swap: After installing this battery, run one full discharge to automatic shutoff, then charge uninterrupted to 100% without using the tablet. This resets the fuel gauge IC calibration to the new cell and eliminates the inaccurate percentage readings that commonly appear after a battery replacement.
Galaxy Tab E shutting down at 15–25% battery remaining
When the display brightness is high and Wi-Fi is active simultaneously, the combined current draw creates a voltage sag that pulls the cell below the BMS cutoff threshold before the percentage gauge reaches zero. The fuel gauge IC was calibrated to the old, degraded cell — so its voltage-to-percentage curve no longer maps correctly to a fresh cell. Run one full discharge cycle to automatic shutoff, then a full uninterrupted charge. After that cycle, the gauge recalibrates and unexpected shutdowns at 15–25% typically stop.
Fast charging not available on the Tab E after battery replacement
Fast charge on the Galaxy Tab E uses Samsung's Adaptive Fast Charging protocol, which requires the charge IC to complete at least one full accepted charge cycle on the new cell before it negotiates higher current delivery. If fast charge is not offered immediately after the swap, this is expected behaviour — not a fault with the battery or the charger. Plug in using the original Samsung charger and cable, let the first charge run to 100% without interruption, and fast charge will be available from the next session onward.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Samsung
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The Tab E percentage jumped from 40% to 5% and then shut off — is the new battery faulty?
The cell itself is not faulty. The fuel gauge IC on the SM-T567 was calibrated to the old cell's voltage curve, and a fresh 6000mAh cell has a different discharge profile at the same voltage points. Run one full discharge to automatic shutoff, then charge uninterrupted to 100% without using the tablet. That single cycle resets the IC calibration and the percentage readings stabilise. After recalibration, the gauge should track consistently down to the 3.2V low-voltage cutoff.
The tablet feels warm near the charging port during the first few charges — should I be concerned?
Warmth during early charging cycles is normal with a new Li-Polymer cell. The charge IC runs at a slightly higher current while it characterises the new cell's internal resistance, which generates modest heat at the charge controller near the port. Surface temperature should stay below 40°C — warm to the touch but not hot. If the tablet becomes hot enough to be uncomfortable to hold, disconnect immediately and check that you are using the original Samsung charger rated at 5V/2A for this tablet.
Battery percentage is dropping faster from 100% than it did with the old battery — what is happening?
This is fuel gauge drift, not accelerated capacity loss. The gauge IC still holds the old cell's calibration data after a swap, so the early part of the discharge curve reads fast on a fresh cell. A single full discharge-to-shutoff followed by an uninterrupted charge to 100% forces the IC to re-map the voltage curve to the new cell. After that cycle, percentage drop from full charge should slow to the expected rate for a 6000mAh, 22.8Wh cell at 3.8V nominal.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.






