Asus Zenbook Flip 13 UX362FA Compatible Battery C31N1816 11.55V
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Asus Zenbook Flip 13 UX362FA Compatible Battery C31N1816 11.55V - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Asus Zenbook Flip 13 UX362FA Compatible Battery C31N1816 11.55V - is backordered and will ship as soon as it is back in stock.
Voltage
11.55V
Amp
4250mAh
Asus Zenbook Flip 13 UX362FA — 11.55V Li-Polymer Replacement Battery (C31N1816)
This is an 11.55V, 4250mAh (49.09Wh) Li-Polymer battery for the Asus Zenbook Flip 13 UX362FA-EL090T and related UX362 and UX433 series convertible laptops. It replaces OEM part numbers C31N1816 and 0B200-03160000. Install it when the original cell no longer holds a usable charge or the laptop won't run unplugged.
- UX362 and UX433 series compatibility: These models share the same three-cell Li-Polymer pack architecture, 11.55V nominal voltage rail, and connector pinout — the BMS handshake signal and thermistor line are identical across the UX362FA and UX433FQ variants, so one cell works across both platforms.
- Bench tested on actual hardware: We ran this cell on the UX362FA and monitored the BMS through charge and discharge cycles. The protection circuit engaged correctly at low-voltage cutoff, and the charge IC accepted the cell without triggering a fault condition.
- Post-install calibration on UX362FA: After fitting this cell, run the laptop down to automatic hibernate cutoff — do not force-shutdown — then charge in one uninterrupted session to 100%. This resets the BIOS battery learn cycle and clears the inaccurate health warning that appears after every cell swap on this platform.
BIOS reporting poor battery health immediately after fitting the new cell
The Asus BIOS reads health data from the battery's EEPROM, which stores cycle count and wear metrics from the previous cell. When a new cell is fitted, the BIOS compares the new cell's fresh EEPROM against the laptop's stored baseline and flags a mismatch as degraded health. This is a firmware read issue, not a fault with the replacement cell. Running one full discharge-to-hibernate followed by an uninterrupted charge to 100% forces the BIOS to re-write the battery learn data against the new cell's actual chemistry. After one or two cycles, the health reading normalises.
Laptop cuts out at 20–30% charge shown on the UX362FA
This happens when the fuel gauge IC hasn't calibrated against the new cell's discharge curve. The IC uses a stored model from the previous cell, so it misreads the voltage slope and calls empty too early. Under combined CPU and display load, the voltage cliff arrives sooner than the gauge predicts, triggering an abrupt shutdown. Run two full discharge-to-hibernate cycles with an uninterrupted charge to 100% after each — the fuel gauge IC re-maps the curve and the shutdowns stop. Confirm the cell is reading correctly by checking the BIOS battery page for a Wh figure near 49Wh.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Asus
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Asus UX362FA shows the new battery as 0% or "unknown" in Windows immediately after fitting — what's wrong?
The Windows fuel gauge IC hasn't built a discharge curve for the new cell yet — it's still reading the old cell's stored data. This isn't a faulty battery. Run the laptop down to automatic hibernate on battery only, then charge uninterrupted to 100%. After one full cycle, the fuel gauge re-initialises against the new cell and the percentage reads correctly.
System info is showing the battery capacity as lower than 49Wh after the swap on my Zenbook — is the cell underspec?
The Wh figure shown in Windows is pulled from the EEPROM data written to the cell at manufacture, which reflects rated chemistry values and may differ slightly from the actual measured capacity at your BIOS version. We saw the same reading on the bench — it normalises after the BIOS completes a learn cycle. Check the BIOS battery page after two full discharge-and-charge cycles; the figure should settle close to 49Wh.
The UX362FA charges to 80% and stops — the charger light stays on but the percentage won't climb higher.
This is a BIOS-controlled charge limit, not a battery fault. Asus ships several UX362 units with a charge ceiling set to 80% in the MyASUS or Battery Health Charging utility to reduce long-term cell stress. Open MyASUS, go to Customization → Battery Health Charging, and switch the mode from "Balanced" or "Maximum Lifespan" to "Maximum Performance" — the charge ceiling lifts to 100% immediately.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





