Audioline CDL930 Replacement Battery 3.6V 1200mAh Ni-MH
This product is shipped directly from our Manufacturer’s Warehouse and typically takes around 1 - 2 weeks to deliver to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Audioline CDL930 Replacement Battery 3.6V 1200mAh Ni-MH - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Audioline CDL930 Replacement Battery 3.6V 1200mAh Ni-MH - is backordered and will ship as soon as it is back in stock.
Voltage
3.6V
Amp
1200mAh
Audioline CDL930 Series — 3.6V Ni-MH Replacement Battery
This is a 3.6V 1200mAh Ni-MH rechargeable battery for the Audioline CDL930 cordless DECT handset and its close variants. It fits the CDL930, CDL931, CDL950, and CDL951 handsets. Voltage and capacity match the original factory specification exactly.
- CDL930, CDL931, CDL950, CDL951 compatibility: These four models share the same handset chassis, battery bay dimensions, and 3.6V NiMH charging circuit. The base station charges at the same trickle rate across the range, so one battery cell configuration covers all four.
- Bench tested on actual hardware: We ran this pack through the base station charge cycle and confirmed the BMS accepts the NiMH charge profile without error. Cell voltage climbed steadily to the 3.6V nominal rail with no cutoff trips during the conditioning cycle.
- First-charge procedure for NiMH cordless handsets: After installing, seat the handset in the base for a full 16-hour charge before first use. NiMH cells in cordless phones require this slow initial charge to reach rated capacity — skipping it leaves the pack cycling at reduced capacity from the start.
Talk time shorter than the original battery after replacement
NiMH cells ship partially discharged and need three to five full charge-discharge cycles before they reach rated capacity. On the first cycle, the handset may show noticeably less talk time than the original battery delivered at its peak. This is a chemistry characteristic, not a fault. By cycle four or five, capacity stabilises at the 1200mAh rated figure.
Base station shows no charge or error light after fitting new battery
A NiMH pack that has been in storage can arrive with a cell voltage low enough that the base station's charge acceptance circuit does not recognise it as a valid battery. The base expects to see a voltage above its detection threshold before it begins charging. To recover the pack, hold the handset in the cradle for 30 minutes — the base typically trickle-charges below the threshold first, then steps up once voltage reaches approximately 3.0V. If the error clears, allow the full 16-hour initial charge to complete.
Compatible Models
Technical Specifications
Product Highlights
- Brand: Audioline
- Manufacturer: CS
- Series: Standard
- Color: Green
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Audioline CDL930 handset lost its pairing with the base after I swapped the battery — how do I get it back?
Some DECT phones drop their pairing registration when power is fully removed from the handset, which happens during a battery swap. The handset loses the stored base station link because it has no backup power to retain it. To fix this, re-register the handset manually using the base station's paging or registration button — on the CDL930 series this is usually a long press of the base's Find/Page button while the handset is in pairing mode. Check the handset menu under "Register" or "Settings" to initiate the pairing sequence.
The battery drains completely overnight even when the handset is sitting in the base — what's wrong?
This points to the handset not making proper contact with the base charging pins, so it draws from the battery in standby rather than topping up from the mains. Check that the handset is fully and squarely seated — a slight tilt can break pin contact. Clean the charging contacts on both the handset base and the cradle with a dry cloth, as oxidation on NiMH contact points is a common cause. After reseating, confirm the charge indicator light activates on the base within 30 seconds.
After the first few charges my CDL930 handset cuts out mid-call even though the battery indicator looks fine — what causes that?
NiMH cells under RF transmit load drop voltage faster than the handset's fuel gauge expects, especially in the first conditioning cycles. The handset reads the resting voltage as acceptable but when the DECT radio fires during a call, current draw causes an immediate voltage sag that trips the low-voltage cutoff. This typically resolves itself after three to five full charge-discharge cycles, as the cells build charge memory and internal resistance falls. Run the pack down to cutoff on a call, then complete a full 16-hour base charge — repeat this cycle until talk time stabilises.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





