Welcome to our store. Proudly serving customers across North America for years. Learn more

For support or quotes: sales@batteryweb.com

WELCOME10
BatteryWeb

BlackView Tab 9 Replacement Battery 3.8V 7400mAh Li-Polymer

Up to 20% off
New arrival
Sale priceFrom $43.99 USD Regular price $54.99
Shipping calculated at checkout.
Fits BlackView Tab 9 and Tab 9 10.1Inch tablets; restores OEM battery function.
This 3.8V 7400mAh Li-Polymer cell delivers full capacity to the display and WiFi chipset.
Connector attaches to the tablet's internal socket with standard polarity; no adapter needed.
We charged this cell in the Tab 9 dock and verified the BMS accepted the new pack without fault codes.
After installation, run one full discharge to automatic shutoff then charge uninterrupted to 100% — this resets the fuel gauge IC calibration against the new cell and resolves inaccurate percentage display that appears after a swap.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.8V

Amp

7400mAh

BlackView Tab 9 10.1-Inch — 3.8V Li-Polymer Replacement Battery

This is a 3.8V Li-Polymer battery rated at 7400mAh (28.12Wh) for the BlackView Tab 9 and Tab 9 10.1-Inch Android tablet. It replaces the original cell when capacity has dropped and the tablet no longer holds a charge through a normal day of use. Voltage and connector specs match the original battery bay on this model.

  • Tab 9 and Tab 9 10.1-Inch fit: Both listed models share the same cell format, voltage rail, and BMS handshake requirements. The same 3.8V Li-Polymer cell fits both without modification.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on a Tab 9 unit. The BMS accepted the cell cleanly, charge IC engaged without fault codes, and voltage held steady across display-on and WiFi-active load conditions.
  • Post-swap fuel gauge reset: After installing this battery, run one full discharge to automatic shutoff, then charge uninterrupted to 100%. The Tab 9's fuel gauge IC is calibrated to the old cell's internal resistance profile — one complete cycle resets it against the new cell and clears the inaccurate percentage reading that appears immediately after a swap.

Tab 9 shutting down at 15–25% remaining

This happens when the display and WiFi radio draw current simultaneously, pulling the cell voltage below the BMS cutoff threshold before the reported percentage reaches zero. An aged original cell shows this earlier because its internal resistance amplifies voltage sag under combined load. A new cell with lower internal resistance reduces the sag, but the fuel gauge still needs recalibration to map the shutoff point accurately. Run one full cycle after installation and the shutdowns at false percentages will stop.

Fast charging not available after battery swap on the Tab 9

The Tab 9 charge IC negotiates the fast charge protocol on the first accepted charge cycle after a new cell is fitted. If fast charge shows as unavailable immediately after installation, that is expected — the handshake has not completed yet. Plug in with the original charger and let the first charge run to 100% without interruption. Fast charge availability restores once the charge IC has logged one complete accepted cycle against the new cell.

Compatible Models

Tab 9 Tab 9 10.1Inch

Technical Specifications

Voltage3.8V
Amp Hours7400mAh
Capacity7400mAh
Rate28.12Wh
Gross Weight350g /12.35 oz
Approximate Weight350g /12.35 oz

Product Highlights

  • Brand: BlackView
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My BlackView Tab 9 is showing the wrong battery percentage after I swapped the battery — it jumped from 40% to dead with no warning.

The fuel gauge IC on the Tab 9 stores calibration data tied to the internal resistance profile of the original cell. When a new cell is fitted, that stored data no longer maps accurately to the new cell's voltage curve. Run the tablet down to automatic shutoff, then charge it uninterrupted to 100% with the screen off where possible. That single full cycle re-anchors the fuel gauge to the new cell and the percentage reading stabilises.

My Tab 9 keeps shutting itself off at around 20% after the battery replacement — did I get a faulty cell?

This is a voltage sag issue, not a faulty cell. When the display and WiFi draw current at the same time, cell voltage dips sharply — and if the fuel gauge is still calibrated to the old cell's resistance profile, the BMS trips the shutoff before the reported percentage hits zero. Run one full discharge-to-shutoff cycle followed by an uninterrupted charge to 100%. After that calibration cycle, the BMS cutoff point aligns with what the screen reports and the early shutdowns stop.

Fast charging stopped working on my Tab 9 after I put in the new battery — the charger still works but it's only slow charging now.

The Tab 9's charge IC re-negotiates the fast charge protocol after a new cell is installed, and it requires one complete accepted charge cycle before it confirms the new cell is compatible and unlocks higher current delivery. Use the original BlackView charger and cable — third-party cables can drop the negotiation. Let the first charge run from low to 100% without unplugging. Fast charge resumes on the next charge session once that initial cycle is logged.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.