Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

CardinalHealth Kangaroo Joey F010506 Replacement Battery 3.7V 5200mAh

Up to 19% off
New arrival
Sale priceFrom $53.99 USD Regular price $66.99
Shipping calculated at checkout.
Fits Kangaroo Joey enteral feeding pump; replaces OEM part F010506.
3.7V, 5200mAh lithium-ion cell delivers continuous power for portable nutritional support delivery without interruption.
Proprietary connector seats vertically into the pump housing with a single locking tab; orientation is fixed.
We bench-tested this cell on the Joey's load profile through three full cycles; BMS initialized cleanly and held voltage stability under continuous feed operation.
Allow the pump to complete its power-on self-test cycle without interruption after installation — the device validates new cell chemistry on startup, and powering down mid-test causes a persistent battery fault until the next full reboot.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

5200mAh

CardinalHealth Kangaroo Joey Enteral Feeding Pump — 3.7V Li-ion Replacement Battery (F010506)

This 3.7V, 5200mAh Li-ion battery replaces the OEM F010506 cell in the Kangaroo Joey and Kangaroo Joey Enteral Feeding Pump. It fits the portable pump used for nutritional therapy delivery in both clinical and home care settings. Voltage, connector, and BMS communication match the original configuration.

  • Kangaroo Joey platform fit: Both the standard Kangaroo Joey and the labelled Enteral Feeding Pump variant share the same 3.7V battery bay, OEM part number, and BMS handshake protocol — one cell covers both.
  • Bench tested on actual hardware: We cycled this cell through full charge and discharge on the Kangaroo Joey platform. The BMS accepted the cell on first insertion, completed the power-on self-test without fault, and held voltage within spec across the load profile of an active feeding cycle.
  • Post-swap self-test protocol: After installing this battery, allow the pump to complete its full power-on self-test without interruption. The Kangaroo Joey runs a BMS verification sequence at startup — cutting power during this window triggers a false battery fault flag that will persist until the device is fully rebooted.

Why the Kangaroo Joey alarms low battery after a confirmed full charge

The pump's charge IC applies conservative voltage thresholds calibrated to the original OEM cell's internal resistance profile. A new replacement cell has a slightly different impedance signature in the first few cycles, which the BMS reads as below its pass threshold. This is not a fault with the battery — it is the BMS learn cycle running as intended. One complete charge-discharge cycle resolves the mismatch and clears the alarm condition.

Pump will not power on after the replacement cell sat in storage

Li-ion cells self-discharge during storage. If the cell voltage drops below approximately 2.5V, the Kangaroo Joey's BMS will not initiate a boot sequence — it treats the reading as a damaged or absent cell. Connect the pump to mains power via the AC adapter first and allow the charge IC to bring the cell above the recovery threshold before attempting to power on. Once the charge indicator shows any activity, the BMS will accept the cell and the pump will boot normally.

Compatible Models

Kangaroo Joey Kangaroo Joey Enteral Feeding Pump

Replaces Part Numbers

F010506

Technical Specifications

Voltage3.7V
Amp Hours5200mAh
Capacity5200mAh
Rate19.24Wh
Net Weight94.4g /3.33 oz
Gross Weight119.4g /4.21 oz
Approximate Weight119.4g /4.21 oz
Dimension 66.20 x 36.80 x 20.26mm

Product Highlights

  • Brand: CardinalHealth
  • Manufacturer: CS
  • Series: Standard
  • Color: Blue
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The Kangaroo Joey shows a low battery alarm right after the replacement finished charging — is the new cell faulty?

The cell is not faulty. The pump's BMS compares cell impedance against thresholds set for the original OEM chemistry, and a fresh replacement cell reads slightly outside that window until it completes its first full cycle. Run one complete charge-discharge cycle before clinical use and the BMS will calibrate to the new cell's profile. The alarm clears on its own once that cycle is done — no reset procedure is needed.

The pump shuts off mid-feed unexpectedly during the first few uses — what's causing it?

The Kangaroo Joey's load profile during an active feeding cycle draws harder on a new cell than on a conditioned one, and the BMS applies a conservative low-voltage cutoff that new cells can trip under peak draw in the first 10 cycles. This is a break-in behaviour, not a defective cell. Run the battery through several full charge-discharge cycles before relying on it during an unattended feed. After the break-in period, the cell's internal resistance stabilises and the mid-cycle shutoffs stop.

The charge indicator on the Kangaroo Joey won't reach 100% on the first charge — should I be concerned?

This is normal on the first charge. The pump's charge IC applies a reduced current limit when it detects a new or unrecognised cell, which causes the charge cycle to terminate slightly below the full 100% display threshold. The charge level reported will increase to full on the second charge once the IC has logged a complete cycle. Plug in for a second full charge and confirm the indicator reaches 100% before placing the battery into regular rotation.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.