COMEN NC8 Patient Monitor Compatible Battery 11.1V 2600mAh
This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
COMEN NC8 Patient Monitor Compatible Battery 11.1V 2600mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
COMEN NC8 Patient Monitor Compatible Battery 11.1V 2600mAh - is backordered and will ship as soon as it is back in stock.
Voltage
11.1V
Amp
2600mAh
COMEN NC8 — 11.1V Li-ion Replacement Battery (022-000142-00)
This is an 11.1V, 2600mAh Li-ion battery for the COMEN NC8 portable patient monitor. It replaces OEM part number 022-000142-00. The NC8 is a bedside vital signs monitor used in clinical and transport settings where AC power is not always available.
- NC8 monitor compatibility: The NC8 uses a dedicated battery bay with a three-cell 11.1V Li-ion configuration. The BMS on this monitor checks cell voltage at startup and communicates charge state to the display. Voltage, connector type, and BMS handshake all match the OEM specification.
- Bench tested on actual hardware: We ran this cell through the NC8 boot sequence and confirmed the BMS completed its initialisation cycle without fault. The charge IC accepted the cell on first connection and reported state-of-charge correctly on the monitor's battery indicator.
- Post-swap power-on sequence: After installing this battery, let the NC8 complete its full power-on self-test without interruption. The monitor runs a BMS verification step at startup. Cutting power during that sequence logs a battery fault that will persist until the next clean reboot cycle.
Why the NC8 shows a battery fault after a confirmed full charge
The NC8's BMS compares cell impedance against stored OEM thresholds during startup. A new cell that has not yet completed a full charge-discharge cycle will have slightly higher impedance than an aged OEM cell the monitor expects. This can trigger a fault flag even when the cell is at full voltage. One complete charge-to-discharge cycle lets the BMS recalibrate its learned capacity value and clear the fault on the next boot.
NC8 will not power on after the battery sat unused in storage
Li-ion cells self-discharge during storage, and if the cell voltage drops below approximately 2.5V per cell — around 7.5V for a three-cell 11.1V pack — the NC8's BMS will refuse to start a charge cycle as a protection measure. Connect the monitor to AC power and leave it on charge for at least two hours before attempting to power on. Most BMS circuits include a trickle pre-charge mode that will recover a low-voltage cell up to the minimum threshold, after which normal charging resumes.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: COMEN
- Manufacturer: CS
- Series: Standard
- Color: Grey
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The NC8 is alarming low battery immediately after I fitted a fully charged replacement — what's wrong?
The NC8 BMS compares incoming cell impedance to a stored OEM reference during startup. A new cell that hasn't completed its first full cycle reads higher impedance than expected, which trips the low-battery alarm even at full voltage. Run one complete charge-discharge cycle before using the battery in a clinical setting. After that cycle, the BMS resets its learned threshold and the alarm clears.
The NC8 shuts off unexpectedly during patient monitoring even though the battery indicator shows charge remaining — what's causing this?
In the first 10 cycles, a new Li-ion cell under the NC8's monitor load profile can experience brief voltage sag that dips below the BMS cutoff threshold, causing an unexpected shutdown before the displayed charge level reaches zero. The cell's internal resistance drops with each cycle, so this behaviour typically resolves after 5–10 full cycles. Until then, keep the monitor on AC power during critical monitoring sessions. Check that the battery indicator reads above 50% before disconnecting from mains.
The charge indicator on the NC8 never reaches 100% on the first charge after fitting this battery — is the cell faulty?
It's not faulty. The NC8 charge IC applies a conservative current limit on a new cell it hasn't profiled before, which can cause the charge cycle to terminate early at 95–98% on the first pass. This is a protective measure built into the charge controller, not a cell defect. Run a second full charge immediately after the first terminates and the indicator will reach 100%. Confirm with the monitor's battery status screen that voltage reads at or above 12.4V before disconnecting.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.



