Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Dopod P100 Replacement Battery GALA160 3.7V 1100mAh

Up to 21% off
New arrival
Sale priceFrom $22.99 USD Regular price $28.99
Shipping calculated at checkout.
Replaces GALA160 battery in Dopod P100 Pocket PC handheld.
3.7V 1100mAh Li-ion cell delivers 4.07Wh — sufficient for full-day PDA use in standard operation without wireless scanning.
Connector seats flush into the P100 battery slot with single-point locking tab; no adapter needed.
We bench-tested this cell in a P100 unit and confirmed BMS voltage regulation at 3.7V nominal with stable discharge curve across standby and active modes.
Sync all data to your host computer before removing the old battery — the P100 stores open files and application state in RAM powered by the main cell, and full power removal erases unsaved data.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1100mAh

Dopod P100 — 3.7V Li-ion Replacement Battery (GALA160)

The GALA160 is a 3.7V 1100mAh Li-ion cell for the Dopod P100 Pocket PC. This PDA ran Windows Mobile and stored active application state in RAM — the main battery powers that RAM directly. When the original cell degrades below a usable threshold, the device loses standby time fast and starts dropping unsaved data.

  • P100 platform fit: The P100 uses a compact 51.54 x 38.98 x 6.64mm cell with a connector and BMS handshake matched to the GALA160 spec. No other cell format in this voltage class fits the bay without modification.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on the P100 platform. The BMS engaged correctly at both the low-voltage cutoff and the charge termination point, with no false cutoffs during the test sequence.
  • Sync before you swap: The P100 holds open files and app state in volatile RAM. That RAM loses power the moment the battery leaves the bay. Sync everything to your host machine before pulling the cell — there is no battery-backed retention once the circuit breaks.

Why the P100 loses contacts, calendar entries, or app data after a battery swap

Windows Mobile PDAs of this generation kept all working data — open contacts, unsaved notes, application state — in SRAM powered continuously by the main battery. There was no flash-backed storage buffer for that layer of memory. The instant the old cell is removed and before the new one seats, that SRAM loses power and clears. A full ActiveSync or Windows Mobile Device Center sync to a PC before the swap is the only way to protect that data. After installing the new cell, restore from that sync.

P100 showing a blank or frozen screen after new battery installed

A fresh cell shipped in storage state may sit at or below 3.0V — too low for the P100's boot sequence to complete. The device appears dead or freezes at the splash screen because the processor voltage rail cannot stabilise. Connect the P100 to its charger before attempting a first boot and leave it for at least 20 minutes. Once the cell reaches approximately 3.6V, the boot sequence will complete normally.

Compatible Models

P100

Replaces Part Numbers

GALA160

Technical Specifications

Voltage3.7V
Amp Hours1100mAh
Capacity1100mAh
Rate4.07Wh
Net Weight23g /0.81 oz
Gross Weight48g /1.69 oz
Approximate Weight48g /1.69 oz
Dimension 51.54 x 38.98 x 6.64mm

Product Highlights

  • Brand: Dopod
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My P100 lost all my contacts and calendar after I swapped the battery — is the data gone for good?

It depends on whether you had synced recently. The P100 stores active data in SRAM that is powered directly by the battery — the moment the old cell leaves the bay, that memory clears. If you ran an ActiveSync or Windows Mobile Device Center sync before the swap, your data is sitting safely on the host PC and restores on the next connection. If you did not sync first, recovery tools for Windows Mobile SRAM loss rarely succeed — treat it as lost and restore from your most recent backup.

New battery installed but the P100 won't boot — just a blank screen or it freezes on the logo.

A cell shipped in storage state can arrive below 3.0V, and the P100 needs a stable voltage rail to complete its boot sequence. At that low voltage the processor stalls, which shows up as a blank screen or a logo freeze. Connect the device to its charger without attempting to power it on, and leave it for 20 minutes. Once the cell climbs to around 3.6V, the boot will complete on the next power button press.

My P100's wireless sync keeps dropping or running slower than it did with the old battery — why?

The wireless radio in the P100 draws a spike of current during transmission that a degraded or partially charged cell cannot sustain cleanly — voltage sags under the load and the radio resets or throttles. This can also happen with a new cell that has not yet been fully charged. Charge the P100 to 100% before running a sync session and confirm the charge indicator shows full. If drops continue at full charge, check that the charging contact pins on the device are clean and making firm contact.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.