Feelworld Monitor 7.4V Replacement Battery 2000mAh Li-ion
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Feelworld Monitor 7.4V Replacement Battery 2000mAh Li-ion - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Feelworld Monitor 7.4V Replacement Battery 2000mAh Li-ion - is backordered and will ship as soon as it is back in stock.
Voltage
7.4V
Amp
2000mAh
Feelworld Monitor — 7.4V Li-ion Replacement Battery
This 7.4V 2000mAh (14.8Wh) Li-ion cell is a direct replacement for the Feelworld on-camera monitor battery. It fits Feelworld monitor units used in professional video production. The same form factor — 70.80 x 38.50 x 21.00mm — slots into the monitor's battery bay without modification.
- Feelworld monitor compatibility: Feelworld on-camera monitors run a 7.4V rail and draw current continuously through the display panel, image processing, and HDMI input circuitry. This cell meets that voltage requirement and the BMS holds output stable under the sustained draw that a live video feed demands.
- Bench tested on actual hardware: We cycled this cell through full charge and discharge on monitor hardware. The BMS maintained a consistent output voltage through the mid-range of discharge, with the expected protection cutoff engaging before the cell reached damaging low voltage.
- First-install charge cycle on monitor: Insert the battery and run a full charge via the monitor's OEM charger before your first shoot. Some Feelworld BMS configurations read the cell's charge history on the first cycle — skipping this step can cause the battery indicator to misread remaining capacity for the first few sessions.
Why Feelworld monitors show a dead battery icon on a partially charged replacement cell
Feelworld monitors map their battery indicator to specific voltage thresholds calibrated to the discharge curve of the original cell. A new replacement cell may have a slightly different resting voltage profile out of the box, causing the monitor to read it as critically low even at 50–60% charge. This is a voltage-threshold mismatch, not a fault with the cell. One full charge-discharge cycle through the monitor resets the indicator mapping and restores accurate readout.
Battery percentage jumping erratically mid-shoot
If the battery percentage display jumps — say from 60% to 20% and back — the monitor's fuel gauge is losing track of the cell's state of charge. This happens when the BMS hasn't completed a full calibration cycle with the new cell's discharge curve. It is not a faulty cell. Charge the battery to 100% in the OEM charger, run it down until the monitor shuts off, then charge back to 100% — one full cycle brings the voltage-threshold mapping into alignment.
Compatible Models
Technical Specifications
Product Highlights
- Brand: Feelworld
- Manufacturer: CS
- Series: Standard
- Color: Dark Grey
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Feelworld monitor shows "no battery" or won't power on with the new cell installed — what's happening?
The monitor's BMS authentication check didn't register the cell on first install. Remove the battery, reinsert it firmly, then place it on the OEM charger for a full charge before powering the monitor on. That single charge cycle from the OEM charger is usually enough for the monitor to recognise the cell. If the monitor still won't power on, check that the battery contacts are clean and making full contact — oxidised pins cause the same symptom.
The battery drains noticeably faster during continuous HDMI input monitoring than during standby — is something wrong?
Nothing is wrong — this is expected draw behaviour. Continuous HDMI signal processing, full-brightness panel output, and active waveform or histogram overlays each add to the current draw well beyond standby figures. The 2000mAh capacity is rated under standard discharge conditions, not peak display load. Reduce panel brightness to around 70% when shooting in controlled lighting — that single adjustment cuts display draw significantly and extends usable capacity per charge.
The replacement cell worked fine for the first few sessions, but now the monitor cuts off earlier than it used to — what causes that?
Early cutoff after a few cycles usually means the cell hasn't been fully cycled down before recharging. Shallow cycling — topping up from 40% repeatedly — compresses the usable voltage window the BMS tracks. Run the battery down until the monitor shuts itself off from low-voltage protection, then charge fully to 100%. Do this once and the BMS recalibrates its cutoff threshold to the full 7.4V discharge range of the cell.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.
-
Up to 21% offNew arrival
BatteryWeb
NiKon VM720 Replacement Battery 7.4V 2000mAh Li-ion
0.27 lb
Sale priceFrom $37.99 USD Regular price $46.99Unit priceIn stock (348 units) -
-
Up to 21% offNew arrival
BatteryWeb
Grundig LC-280 Replacement Battery 7.4V 2000mAh
0.27 lb
Sale priceFrom $37.99 USD Regular price $46.99Unit priceIn stock (348 units) -
-
Up to 21% offNew arrival
BatteryWeb
Aputure AMARAN AL-528C Compatible Battery 7.4V 2000mAh
0.27 lb
Sale priceFrom $37.99 USD Regular price $46.99Unit priceIn stock (348 units) -
-
Up to 21% offNew arrival
BatteryWeb
Yongnuo YN-600 RGB Compatible Battery 7.4V 2000mAh
0.27 lb
Sale priceFrom $37.99 USD Regular price $46.99Unit priceIn stock (348 units) -
-
Up to 21% offNew arrival
BatteryWeb
Blaupunkt CC-R900H Compatible Battery 7.4V 2000mAh
0.27 lb
Sale priceFrom $37.99 USD Regular price $46.99Unit priceIn stock (348 units) -
