Gateway NV52 Replacement Battery 11.1V 8800mAh AS09A31
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Gateway NV52 Replacement Battery 11.1V 8800mAh AS09A31 - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Gateway NV52 Replacement Battery 11.1V 8800mAh AS09A31 - is backordered and will ship as soon as it is back in stock.
Voltage
11.1V
Amp
8800mAh
Gateway NV52 Series — 11.1V Li-ion Replacement Battery (AS09A31)
This is an 11.1V, 8800mAh Li-ion replacement battery for the Gateway NV52 series of notebook computers. It fits the NV52, NV5207U, NV5211U, NV5212U, and over 59 additional NV-series variants. Capacity is 97.68Wh — matching the original cell specification for this platform.
- NV52-series platform fit: These models share a common battery bay connector, BMS handshake protocol, and 11.1V three-cell voltage rail. Any model on the AS09A31 compatibility list uses the same EEPROM battery data structure, so the replacement cell communicates with the BIOS without modification.
- Bench tested on actual hardware: We ran this cell through a full charge-discharge cycle on NV52 hardware. The BMS accepted the handshake immediately, the BIOS recognised the cell as a valid pack, and charge current stepped down correctly at the 80% and 100% thresholds as expected from Gateway's firmware.
- First-cycle calibration on NV52: After installing, run one full discharge to hibernate-cutoff, then charge uninterrupted to 100%. This forces the BIOS battery learn cycle to reset against the new cell's actual capacity, clearing the inaccurate health warning that typically appears after every cell swap on this platform.
BIOS reporting poor battery health immediately after fitting a new cell
The Gateway NV52 BIOS stores learned capacity data from the previous cell in non-volatile memory. When a new cell goes in, that stored data no longer matches the actual pack chemistry, so the BIOS flags the battery as degraded before it has run a single cycle. This is not a fault with the replacement cell — it is stale EEPROM data from the old pack. Run one complete discharge-to-hibernate cycle followed by a full uninterrupted charge to 100%, and the BIOS will rewrite its health record against the new cell.
Laptop shuts down abruptly at 20–30% charge shown on screen
This happens when the fuel gauge IC has not yet calibrated against the new cell's actual voltage curve. The gauge reports 25% remaining, but the cell hits its low-voltage cutoff cliff under combined CPU and display load before the OS receives a low-battery warning. The fix is the same calibration cycle — discharge fully to hibernate, charge straight to 100% without interruption. After two full cycles the fuel gauge IC maps the new cell's voltage curve accurately, and shutdowns at falsely high percentages stop. Target voltage at full charge is 12.6V across the pack.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Gateway
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Gateway NV52 shows 0% battery and "plugged in, not charging" right after fitting the new cell — what's wrong?
The fuel gauge IC on the NV52 sometimes loses its reference point entirely when the old cell is swapped out, and reports 0% or an unknown state until it completes at least one calibration cycle. Plug the laptop in, let it charge to 100% without interrupting it, then discharge fully to hibernate cutoff. That sequence re-initialises the fuel gauge IC against the new cell's chemistry and clears the 0% reading.
System info shows the wrong Wh rating for this battery — it lists a much lower number than 97.68Wh. Is the cell faulty?
The Wh value displayed in Windows or the BIOS is pulled from the EEPROM data stored on the battery pack, not measured in real time. The old cell's rated Wh value can persist in system records until the BIOS completes a full learn cycle. Run one full discharge to hibernate and one uninterrupted charge to 100% — the BIOS will rewrite the Wh figure to match the new cell's 97.68Wh rating once the learn cycle is complete.
The NV52 fuel gauge counts down erratically — jumping from 60% to 40% in minutes, then sitting at 35% for a long stretch. Is this a bad cell?
Erratic fuel gauge behaviour on the first few cycles is caused by the gauge IC mapping its discharge curve against the old cell's profile, which no longer matches the new chemistry. It does not mean the cell is defective. Run two full discharge-to-hibernate cycles with uninterrupted charges to 100% in between. By the third cycle the gauge IC has enough data points to track the new cell's voltage curve accurately, and the percentage readout stabilises.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





