Hagenuk KT951 3.6V Cordless Phone Replacement Battery 1200mAh
This product is shipped directly from our Manufacturer’s Warehouse and typically takes around 2 weeks to deliver to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Hagenuk KT951 3.6V Cordless Phone Replacement Battery 1200mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Hagenuk KT951 3.6V Cordless Phone Replacement Battery 1200mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.6V
Amp
1200mAh
Hagenuk ST9000CX / Digicell Series — 3.6V Ni-MH Replacement Battery (KT951)
This is a 3.6V 1200mAh Ni-MH battery replacing the KT951 pack in Hagenuk cordless handsets. It fits the ST9000CX, ST9000ZX, Digicell, and Digicell CX among others. The cell chemistry and connector match the original factory specification.
- ST9000CX and Digicell platform fit: These models share the same 3.6V single-cell NiMH architecture and KT951 footprint. The connector orientation, cell count, and BMS-free low-voltage floor are identical across the range, so one pack covers all listed variants.
- Bench tested on actual hardware: We cycled this battery on a ST9000-series handset and confirmed the base station accepted the charge contact without error. The NiMH cells reached stable capacity by cycle four, with voltage holding above 3.3V under RF transmit load.
- First-charge requirement for NiMH cordless packs: After fitting, seat the handset in the base and leave it for a full 16-hour slow charge before first use. NiMH cells in cordless phones need this initial slow charge to reach rated capacity — a 1–2 hour top-up will not be enough and will make the battery appear weak out of the box.
Range drops mid-call after fitting a new NiMH pack
DECT handsets adjust RF transmit power based on available voltage. A fresh NiMH pack that hasn't completed conditioning cycles will sag below 3.3V under the current draw of active transmission. The base station interprets this as a weak signal rather than a battery issue, so the handset steps down its transmit power and range shrinks noticeably. Run three to five full charge-discharge cycles and the voltage sag under RF load will stabilise.
Handset stops pairing with the base after battery replacement
Some Hagenuk DECT models store pairing data in volatile memory that clears when power is fully removed — which happens the moment you swap the battery. The handset comes back up without a registered base and will show no line or no signal. To fix this, hold the handset's Paging or Find button on the base for three seconds while the handset is powered on, then follow the on-screen register prompt. Pairing typically completes within 30 seconds.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Hagenuk
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Hagenuk ST9000CX talk time is terrible even after a full charge — is the new battery faulty?
Almost certainly not. NiMH cordless phone batteries typically deliver well under half their rated capacity for the first three to five cycles. The cells need repeated full charge-discharge cycles to break in — this is normal NiMH behaviour, not a defect. Run the handset down until it beeps low, return it to the base for a full overnight charge, and repeat this three times before judging capacity.
The base station shows a charge error light after I fitted the replacement battery — what's wrong?
NiMH cells lose voltage during storage, and some Hagenuk bases reject a pack that presents below roughly 3.0V at the charge contacts. The base sees the low open-circuit voltage and flags it as a fault rather than starting a charge cycle. Remove the handset, wait 30 seconds, then reseat it firmly — contact pressure matters. If the error persists, briefly connect the handset to a USB power source or second charger for five minutes to raise the cell voltage above the base's acceptance threshold, then return it to the base.
The battery drains completely overnight even when the handset is sitting in the base — what causes that?
This is a seating issue, not a battery fault. The Hagenuk ST9000-series base charges through spring contacts on the handset base plate, and if the handset isn't sitting flush, the circuit doesn't close and the battery continues drawing standby current without recharging. Check that the handset clicks into the base and that both gold contacts on the handset align visibly with the pins on the cradle. Clean the contacts with a dry cloth if there's any tarnish, then reseat the handset and confirm the charge indicator light activates.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




