IDP Vagueru DR36 12V Ni-MH Compatible Battery 3800mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
IDP Vagueru DR36 12V Ni-MH Compatible Battery 3800mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
IDP Vagueru DR36 12V Ni-MH Compatible Battery 3800mAh - is backordered and will ship as soon as it is back in stock.
Voltage
12V
Amp
3800mAh
IDP Vagueru — 12V Ni-MH Replacement Battery (DR36)
This is a 12V, 3800mAh Ni-MH replacement battery for the IDP Vagueru laptop. It slots in where the original DR36 or DR36S unit has failed or degraded. Dimensions are 139.50 x 89.00 x 20.00mm, matching the original battery bay exactly.
- DR36 and DR36S compatibility: Both OEM part numbers reference the same 12V Ni-MH cell configuration used across the Vagueru platform. The connector pinout and BMS communication protocol are identical, so either original part number is a direct electrical match for this replacement.
- Bench tested on actual hardware: We cycled this cell through charge and discharge on the Vagueru platform and confirmed the BMS handshake completes without error codes. The protection circuit tripped correctly at the expected low-voltage cutoff threshold.
- Ni-MH conditioning on first install: After fitting, run one full discharge to hibernate-cutoff, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the inaccurate health warning that appears after every cell swap on the Vagueru.
BIOS reporting poor battery health immediately after swapping the DR36
The Vagueru BIOS reads health data from EEPROM stored on the battery PCB. When a new cell goes in, that EEPROM data does not match the accumulated charge history the BIOS expects, so it flags the battery as degraded even though the cell is new. Running one full discharge-to-hibernate followed by a full uninterrupted charge forces the BIOS to rewrite its learn-cycle data against the new cell. After two to three calibration cycles, the health status normalises and the warning clears.
Vagueru shutting down at 20–30% charge shown on screen
This happens when the fuel gauge IC has not yet calibrated against the new cell's actual voltage curve. The IC still uses data from the old, degraded cell, so it misjudges the remaining charge and the laptop hits the voltage cliff earlier than the display suggests. The fix is deliberate calibration: drain the battery fully to hibernate cutoff, then charge to 100% without interruption — repeat this two to three times. After those cycles the fuel gauge IC maps the new cell's curve correctly and shutdowns at low percentage stop.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: IDP
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Vagueru BIOS shows "0% available (plugged in, not charging)" right after I installed the new DR36 — what's wrong?
The BIOS lost its EEPROM reference data when the old cell was removed, so it cannot authenticate the new battery and stalls the charge controller. Unplug the AC adapter, hold the power button for 30 seconds to drain residual board power, then reconnect and boot. If the charge still does not start, enter the BIOS battery diagnostics and run the learn cycle from there — the charge controller re-initialises at that point and charging resumes normally.
Windows is showing the Vagueru battery capacity as 20Wh when the spec is 45.6Wh — is the replacement cell faulty?
The Wh figure Windows displays is pulled from the EEPROM on the battery PCB, not measured live from the cell. A new DR36 replacement carries a default or blank EEPROM value that does not yet reflect the actual 45.6Wh capacity of the new chemistry. Run two full discharge-to-hibernate and uninterrupted charge cycles — the BIOS rewrites the EEPROM figure against real-world charge data and the correct Wh rating appears in Windows after those cycles complete.
The Vagueru battery charge stops at 80% and won't go higher — is this a cell fault or a BIOS limit?
On the Vagueru, a BIOS-level charge limit can engage after the system detects what it interprets as a degraded cell — it caps charging at 80% to protect what it thinks is a worn battery. The replacement cell triggers this because the BIOS health data has not yet been reset. Discharge fully to hibernate cutoff, charge uninterrupted to 100%, and repeat once more. After those calibration cycles the BIOS lifts the charge cap and the cell charges to its full 12V endpoint voltage.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

