JVC BN-60U Replacement Battery 6V 2100mAh Ni-MH
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
JVC BN-60U Replacement Battery 6V 2100mAh Ni-MH - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
JVC BN-60U Replacement Battery 6V 2100mAh Ni-MH - is backordered and will ship as soon as it is back in stock.
Voltage
6V
Amp
2100mAh
JVC BN-60U / BN-V11U / BN-V12 / BN-V14U Series — 6V Ni-MH Replacement Battery
This is a 6V, 2100mAh Ni-MH replacement battery for JVC compact cameras and camcorders that use the BN-60U, BN-V11U, BN-V12, or BN-V14U cell. It fits a broad range of JVC equipment from the mid-2000s era that shares this voltage rail and form factor. Capacity is 12.6Wh — matching the original spec.
- BN-V series cross-compatibility: The BN-60U, BN-V11U, BN-V12, and BN-V14U share the same 6V rail, physical footprint, and connector orientation across JVC's compact lineup. That shared architecture is why one cell covers all four model designations without modification.
- Bench tested on actual hardware: We cycled this cell through charge and discharge on JVC body hardware. The Ni-MH chemistry accepted charge cleanly from both OEM chargers and third-party units, and the BMS did not flag the cell on initial insertion.
- First charge cycle on JVC body: Run the first full charge from within the JVC camera body or OEM charger — not a generic third-party unit. Some JVC BMS firmware maps battery-remaining display thresholds during that initial charge cycle. Skipping it can cause the indicator to read inaccurately for the first several uses.
Why JVC cameras show a low-battery warning on a freshly charged Ni-MH cell
Ni-MH cells have a flatter discharge curve than Li-ion, and JVC's mid-2000s camera firmware was calibrated around the voltage behaviour of the original factory cell. A new replacement cell may sit at a slightly different resting voltage — typically between 6.0V and 6.3V fully charged — which the camera's indicator maps differently. This isn't a fault with the cell. After one or two full charge-discharge cycles, the BMS recalibrates its threshold mapping and the indicator stabilises.
Battery percentage jumping erratically during a shoot
This happens when the camera's voltage-to-percentage map doesn't align with the new cell's discharge curve on first use. The indicator may drop suddenly from 80% to 20%, then recover — the cell still has charge, but the firmware is reading voltage at the wrong point on the Ni-MH curve. Run one complete charge cycle, discharge the cell fully through normal use, then recharge to 100%. After that cycle, the percentage display tracks the actual cell state reliably. If jumping persists after two cycles, check the battery contacts are clean and seating at full depth.
Compatible Models
Technical Specifications
Product Highlights
- Brand: JVC
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My JVC camera says the battery is dead right after I charged it — is the replacement cell faulty?
Almost certainly not. JVC's mid-2000s camera firmware reads a resting voltage threshold to determine charge state, and a new Ni-MH cell's resting voltage can sit slightly outside the range the body expects before it's been cycled. Charge the cell fully using the OEM JVC charger or inside the camera body, then discharge it completely through normal shooting, and charge again. After that first full cycle, the camera should read the cell correctly.
The shot count I'm getting is noticeably lower than I expected from a 2100mAh cell — what's drawing it down?
Optical zoom motors, continuous autofocus, and the LCD backlight all pull current simultaneously on JVC compact bodies, and that combined draw is higher than any single-feature spec suggests. Cold ambient temperatures also reduce Ni-MH capacity noticeably — a cell that performs well indoors may deliver significantly fewer shots below 10°C. Check that the LCD brightness isn't set to maximum and that optical stabilisation is only enabled when needed. Both are consistent draws that compound quickly on a Ni-MH cell at this capacity.
The flash on my JVC camera stopped recycling fully between shots — could the battery be the cause?
Yes. Flash capacitor recharge pulls a hard current spike after every shot, and if the cell's internal resistance has risen — either through age or insufficient cycling — it can't deliver that spike fast enough. The result is a longer recycle wait or a visibly weaker flash on consecutive shots. Check the cell's resting voltage with a multimeter after a full charge: it should read at or above 6.0V. If it reads below 5.8V at rest, the cell isn't holding a full charge and needs replacing.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





