Lenovo Miix 310 Replacement Battery 3.7V 6900mAh
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Lenovo Miix 310 Replacement Battery 3.7V 6900mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Lenovo Miix 310 Replacement Battery 3.7V 6900mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.7V
Amp
6900mAh
Lenovo Miix 310-10ICR — 3.7V Li-Polymer Replacement Battery (LENM1029CWP)
This is a 3.7V, 6900mAh (25.53Wh) lithium-polymer replacement battery for the Lenovo Miix 310 and Miix 310-10ICR 2-in-1 tablet. It fits the detachable hybrid chassis that runs both as a standalone tablet and as a notebook when docked to the keyboard base. OEM part numbers LENM1029CWP, 5B10L60476, and 5B10L13923 all cross-reference to this cell.
- Miix 310 series compatibility: All Miix 310-10ICR variants share the same battery bay dimensions, connector pinout, and BMS handshake protocol — the flat 140.50 × 142.80 × 3.00mm Li-Polymer pouch format is consistent across the full 310 lineup regardless of regional SKU suffix.
- Bench tested on actual hardware: We ran this cell on a Miix 310-10ICR unit and confirmed the BMS accepted charge initiation without fault codes, balanced cell voltage correctly through full charge, and tripped the low-voltage cutoff at the expected threshold without hard shutoff errors.
- Post-install recalibration on the Miix 310: After fitting this cell, run one full discharge down to hibernate-cutoff, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the inaccurate health warning that appears after every cell swap on this platform.
BIOS reporting battery health as poor after replacement on the Miix 310
The Miix 310 stores battery health metrics in EEPROM on the original cell. When a new cell is installed, the BIOS reads stale data that doesn't match the new chemistry profile and flags the battery as degraded or unknown. This is a calibration state, not a fault. Run one full discharge-to-hibernate cycle followed by an uninterrupted full charge. After two to three complete cycles, the BIOS fuel gauge IC recalibrates against the new cell and the health warning clears.
Miix 310 shutting down at 20–30% charge shown on screen
This symptom means the fuel gauge IC has not yet mapped the new cell's voltage curve. The displayed percentage is based on EEPROM data from the old, degraded cell — so 25% shown may actually be near the real cutoff voltage of the new cell. The Miix 310 cuts power when the cell drops below approximately 3.0V per cell under load from the display and SoC combined. Completing two full discharge-to-100% cycles forces the gauge IC to relearn the voltage-to-capacity curve and eliminates the premature shutoff.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Lenovo
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The Miix 310 shows the new battery as 0% and won't boot — is the cell dead?
The BIOS is reading EEPROM data from the old cell and cannot reconcile it with the new one yet. Connect the charger and leave it for 20–30 minutes before attempting to power on — the cell may simply need trickle charge to reach the minimum boot threshold. Once it boots, run one full discharge to hibernate-cutoff then charge uninterrupted to 100% to initialise the learn cycle. After that first full cycle the BIOS will read the cell correctly and the 0% error will not return.
Windows shows the Miix 310 battery as 19Wh but the replacement is rated 25.53Wh — why is it reporting the wrong capacity?
Windows pulls the Wh figure directly from the battery's EEPROM, which still holds the rated data written by the original cell's firmware. The new cell's actual chemistry is 25.53Wh, but the system won't update that figure until the fuel gauge IC completes its recalibration cycles. Run two full discharge-to-100% charge cycles and the reported Wh figure in Windows Battery Report will converge toward the correct value. Check with `powercfg /batteryreport` in an elevated command prompt to confirm.
The replacement battery on the Miix 310 stops charging at 80% and never goes higher — is the charger faulty?
This is a BIOS-controlled charge limit, not a charger or battery fault. Lenovo's firmware on the Miix 310 includes a battery conservation mode that caps charging at 80% to reduce long-term cell stress. Open Lenovo Vantage, navigate to Power, then Battery, and check whether Conservation Mode is toggled on — disable it and the charge ceiling returns to 100%.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.






