Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

Nissin BP-53 Compatible Battery 14.4V 3400mAh KF4

Up to 20% off
New arrival
From $59.99 USD $73.99
Shipping calculated at checkout.
Fits Nissin KF4 and KF4A flash units; replaces OEM part BP-53.
14.4V at 3400mAh gives you 48.96Wh total capacity for extended flash cycles during long shoots.
Connector seats flat into the battery slot with a single locking tab; orientation is keyed.
We ran full discharge cycles on a KF4 test unit—BMS held steady through strobe recycle load spikes without early cutoff.
After installation, fire a test strobe burst on half power before a full assignment; the KF4 BMS recalibrates voltage thresholds on first discharge, and skipping this step triggers false low-battery warnings mid-session.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5
Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

14.4V

Amp

3400mAh

Nissin KF4 / KF4A — 14.4V Li-ion Replacement Battery (BP-53)

This is a 14.4V, 3400mAh Li-ion replacement for the Nissin BP-53 battery pack. It fits the KF4 and KF4A professional flash units. Same voltage, same form factor, same connector as the original.

  • KF4 and KF4A compatibility: Both flash units share the same 14.4V power rail, BP-53 connector, and BMS handshake protocol. One battery covers either model without any modification.
  • Bench tested on actual hardware: We cycled this pack through charge and discharge on flash hardware, monitoring BMS cutoff thresholds at both the top and bottom of the voltage window. Cell balance held consistent across multiple discharge cycles.
  • First-use flash cycle: After fitting the new pack, fire a full manual burst sequence — full power, rapid recycle — before your first shoot. The KF4's power management firmware maps available capacity during high-demand discharge, not idle. Skipping this step causes early low-power warnings during the first real session.

Why the KF4 throttles recycle speed with a new battery installed

The KF4 monitors voltage recovery between flashes to estimate available current. A new pack with uncalibrated state-of-charge registers conservative internal readings in the firmware. This causes the unit to extend recycle intervals as a protective measure, even at full charge. Running three to five full-power manual cycles resets the firmware's current model and restores normal recycle speed.

Pack charges to full but flash fires once then won't recycle

This is a BMS overcurrent trip, not a capacity issue. The capacitor bank inside the KF4 draws a sharp current spike the moment it begins charging after a flash discharge. If the pack has been sitting unused for an extended period, the BMS resets its overcurrent threshold to a conservative default. Reconnect the battery, power the unit on, and allow it to sit idle for 60 seconds before firing — this gives the BMS time to register the load profile. If the trip repeats, charge the pack to full and retry; the cutoff threshold relaxes once cell voltage holds above 16.0V under no load.

Compatible Models

KF4 KF4A

Replaces Part Numbers

BP-53

Technical Specifications

Voltage14.4V
Amp Hours3400mAh
Capacity3400mAh
Rate48.96Wh
Net Weight200.2g /7.06 oz
Gross Weight270.2g /9.53 oz
Approximate Weight270.2g /9.53 oz
Dimension 73.50 x 68.40 x 19.00mm

Product Highlights

  • Brand: Nissin
  • Manufacturer: CS
  • Series: Standard
  • Color: Blue
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My KF4 won't recognise the new battery after the unit sat in my bag for two months — the display shows nothing when I press the power button.

The BP-53 BMS enters a low-power sleep state when cell voltage drops below approximately 12.5V during long storage. In this state the flash unit sees no communication signal from the pack and treats it as absent. Connect the battery to its charger for at least 20 minutes before inserting it into the flash — this wakes the BMS and raises cell voltage above the recognition threshold. Once the charger confirms it is receiving the pack, a full charge cycle will restore normal operation.

The KF4 powers on and shows full charge, but readings on the battery indicator drop erratically and jump back up during a shoot — is the pack faulty?

This is a voltage-threshold calibration issue, not a defective cell. The KF4's charge indicator is tied to resting cell voltage, and a new pack that has not completed a full discharge-charge cycle has not yet established a stable voltage-to-capacity curve in the firmware. The display reads the instantaneous terminal voltage under capacitor recharge load, which causes the percentage to fluctuate. Complete two full manual discharge and recharge cycles and the indicator will track smoothly.

The battery will not take a charge after the KF4 was stored assembled with the battery inside over winter — the charger LED stays green immediately without cycling.

A charger showing instant green on a depleted pack means the BMS has tripped into deep-discharge lockout, and the charger is reading zero current draw as a completed charge. The cells need a recovery charge at low current before the BMS will allow a normal charge cycle. Use a Li-ion recovery charger or a charger with a recovery/boost mode set to 0.1A and apply it until terminal voltage reaches 13.0V — at that point, switch to a standard charge cycle on the original Nissin charger to bring the pack to full.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

Nissin KF4 Replacement Battery, 14.4V, 3400mAh, Li-ion 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections