Rowenta RH9159WO 25.9V Replacement Battery 2600mAh
Available by SPECIAL ORDER. Delivery for this product typically takes 2 weeks.
EXTRAOFF
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Rowenta RH9159WO 25.9V Replacement Battery 2600mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Rowenta RH9159WO 25.9V Replacement Battery 2600mAh - is backordered and will ship as soon as it is back in stock.
Voltage
25.9V
Amp
2600mAh
Rowenta RH9159WO Series — 25.9V Li-ion Replacement Battery (RS-2230001774)
This 25.9V, 2600mAh (67.34Wh) lithium-ion battery replaces the original pack in the Rowenta RH9159WO cordless stick vacuum and its variants, including the RH9159WO/2D0R, TY9179WO/2D1, and TY9171WO/2D1. It slots into the same battery bay and connects to the same BMS handshake the vacuum's motor controller expects. When the original pack no longer powers a full clean, this is the direct swap.
- RH9159 and TY91 series compatibility: These models share the same 25.9V seven-cell Li-ion architecture, identical connector housing, and the same BMS communication protocol — that is why one part number covers all of them. Swapping packs across this lineup does not require firmware changes or adapter brackets.
- Bench tested on actual hardware: We ran this cell through charge-discharge cycles on the RH9159WO motor controller. The BMS negotiated correctly at first contact, the overcurrent threshold held during simulated carpet-load spikes, and voltage under sustained draw stayed above the low-cell cutoff the vacuum uses to trigger shutdown.
- Dock charging discipline on cordless vacuums: Do not leave the vacuum sitting on the charging dock between uses. Continuous trickle charging through the dock accelerates capacity fade in Li-ion packs faster than any other single factor for this device class. Charge to full, then remove the vacuum from the dock until the next use.
Suction dropping before the battery indicator reaches low
The RH9159WO's motor draws significantly more current when airflow is restricted — a partially blocked filter can push draw well above the rated load. The BMS reads this as a voltage sag event and throttles power to the motor before the battery indicator registers as low. The battery is not failing; the motor is working harder than it should. Clean or replace the filter and the full power band returns across the charge cycle.
Motor cuts out completely then recovers after a few seconds
This is a BMS overcurrent trip, not a dead battery. When sustained suction restriction — a blockage in the brush head or hose — forces the motor to pull beyond the pack's continuous current limit, the BMS opens the discharge circuit to protect the cells. After a few seconds the BMS resets and power returns. Clear the blockage, then check that the filter is seated correctly before restarting.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Rowenta
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Rowenta RH9159WO runs for a noticeably short time even with a new battery — what causes that?
A partially blocked filter is the most common cause — restricted airflow forces the motor to draw more current than rated, which depletes the pack faster than normal operation would. Pull the filter out and hold it up to the light; if it is visibly grey or opaque, replace it before drawing conclusions about the battery. We saw this exact pattern on the bench — current draw with a blocked filter ran roughly 30–40% above the baseline load. Fit a clean filter first, then reassess the run time.
The replacement battery charged fully but my RH9159WO loses strong suction about halfway through a clean — why?
This is voltage sag under motor load, not a capacity problem. As the pack discharges past roughly 22V, the voltage available to the motor drops and suction output falls with it — this is normal Li-ion behaviour across the discharge curve, not a fault. If the drop feels severe or happens earlier than expected, check that the brush roll is not tangled and the filter is clean, because added mechanical resistance compounds the sag. A healthy pack at 25.9V fully charged should maintain strong suction well past the halfway point of a clean cycle.
The Rowenta RH9159WO won't start charging with the replacement battery fitted — what should I check first?
The charger expects a BMS handshake before it begins pushing current into the pack. If the replacement cell's BMS does not respond within the expected window, the charger stays in standby and nothing happens. Start by removing the battery, waiting 30 seconds, and reseating it firmly — a loose connection breaks the handshake. If the charger still shows no activity, measure the battery's resting voltage with a multimeter; anything above 20V means the cells are not deeply discharged and the issue is contact or handshake, not a dead pack.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




