Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Ryobi OP4026A 40V Replacement Battery 9000mAh Li-ion

Up to 19% off
New arrival
Sale priceFrom $208.99 USD Regular price $257.99
Shipping calculated at checkout.
Fits Ryobi RY40210 string trimmer and RY40200, RY40600, RY40610 models; replaces OP4026A, OP4026, OP4030, OP4015, OP4050, OP4050A, and BPL36/40/50 series packs.
40V lithium-ion at 9000mAh delivers 360Wh total energy; voltage sag on this trimmer drops noticeably under sustained cutting load in thick brush.
Slide-latch connector mounts vertically into the trimmer grip; press the catch tab flush before rotating the pack clockwise to seat fully.
We bench-tested this cell in the RY40200 edger motor for three full discharge cycles; BMS held stable through motor start inrush without nuisance cutoff.
On first use, run the trimmer at half throttle for two cycles before maximum cutting speed — allows the BMS to calibrate motor inrush current thresholds on this platform.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

40V

Amp

9000mAh

Ryobi RY40210 / RY40200 Series — 40V Li-ion 9.0Ah Replacement Battery (OP4026A)

This is a 40V lithium-ion battery rated at 9000mAh (360Wh), built to fit the Ryobi 40V platform. It slots into the RY40210 and RY40200 string trimmers, the RY40610 and RY40600 blowers, and 76+ additional Ryobi 40V tools sharing the same battery rail and BMS handshake. OEM part numbers covered include OP4026A, OP4026, OP4030, OP4040A, OP40501, and related variants.

  • 40V platform compatibility: Every model in this fit list runs the same 40V rail, uses the same keyed slide connector, and expects the same BMS communication signal from the pack. That shared architecture is why one battery covers string trimmers, blowers, and mowers across the range.
  • Bench tested on actual hardware: We ran this pack on a RY40210 trimmer head under continuous load. The BMS held the voltage rail stable through repeated motor-start inrush spikes and engaged overcurrent protection cleanly without nuisance trips at normal throttle.
  • First-use break-in on string trimmer: On the first two charges, run the trimmer at half throttle through light grass before pushing full-speed cuts through thick brush. This lets the BMS log the motor's inrush current signature and set accurate overcurrent thresholds before you hit heavy vegetation.

BMS cutoff on trigger-pull inrush during thick-brush cuts

When the RY40210 trimmer head bites into dense material, the motor draws a short inrush spike that can be three to five times the steady-state current. If the BMS has not yet profiled the motor's inrush pattern — common with a new or freshly charged pack — it may read that spike as a fault and cut power immediately. The fix is to let the BMS accumulate a few normal-load cycles before demanding peak torque. After two or three standard cycles the protection threshold settles around the tool's real operating envelope and nuisance cutoffs stop.

Charger not recognising the pack after long storage

A 40V Li-ion pack sitting unused for several months can drop below the charger's acceptance threshold — typically around 30V. When cell voltage falls that low, the Ryobi charger sees the pack as defective and either blinks red or shows no response at all. To recover the pack, connect it briefly to the tool and pull the trigger for two to three seconds; this draws a small load that can bump cell voltage just enough for the charger to accept it. Once the charger begins a normal charge cycle, confirm the LED moves to solid green within the first 30 minutes — if it stays red, cell voltage is below 25V and recovery is unlikely.

Compatible Models

RY40210 RY40200 RY40610 RY40600 RY40510 RY40500 RY40410 RY40400 RY40110 RY40100 RY40112 RY40500A RY40220 RY40204 RY40511 RY40002 RY40601 RY40190 RY40190-Y RY40180 RY40180-Y 40V Lithium BRUSHLESS 40-Volt Brushless Lithium-Ion Cordless ElectricLawn Mower 40V Backpack Blower 625 CFM RY40440 40V VAC ATTACK Leaf Mulcher RY40450 RY40460 40V 500 CFM Jet Fan 500 CFM RY40530 40V 14 IN Brushless Chain Saw 40V 20 IN BRUSHLESS RY40201A RY40202 RY40250 RY40402A/ R40402 RY40403 RY40403A RY40411 RY40430 RY40502A RY40601A RY40502 R40402 RBC3600E RBC3626E RBC36X20B RBC36X26B RBL3600 RBL3600J RBL3626 RBL36B RBL36JB RBV36B RCS36 RCS36B RCS36X3550HI RED3600 RED3626 RHT3600 RHT3625 RHT36C5525 RHT36C60R15 RLM3600L RLM3640L RLM36X40H RLM36X40H40 RLM36X40H50 RLM36X46H5P RLM36X46L50HI RLT3600C RLT3625C RLT36B33 RLT36C3325 RLTHTB36 RPP3600 RPP3626 RY40402A

Replaces Part Numbers

OP4026A OP4026 OP4030 OP4015 OP4050 OP4050A BPL3626 BPL3626D BPL3640 BPL3640D BPL3650 BPL3650D OP4040A OP40201 OP40261 OP40301OP4040 OP40401 OP40501 OP40601 OP40602 OP40301 OP4040

Technical Specifications

Voltage40V
Amp Hours9000mAh
Capacity9000mAh
Rate360Wh
Net Weight2070g /73.02 oz
Gross Weight2350g /82.89 oz
Approximate Weight2350g /82.89 oz
Dimension 183.40 x 101.60 x 115.40mm

Product Highlights

  • Brand: Ryobi
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My RY40210 trimmer cuts out the moment I hit thick grass — battery or tool?

That's a BMS overcurrent trip, not a tool fault. The motor-start inrush through dense material spikes current faster than the BMS expects on a new or recently stored pack. Run two light-load cycles — thin grass at half throttle — so the BMS can log the motor's inrush signature and widen its protection threshold. After that, full-throttle cuts through thick brush should hold without cutoff.

The trimmer feels weak and bogs down mid-cut even though the battery shows full charge — what's wrong?

That's voltage sag — the cell rail drops under sustained motor load even when the state-of-charge indicator reads high. First, check the battery contacts on both the pack and the tool for corrosion or debris; high contact resistance amplifies sag. If contacts are clean, the cells may have degraded from repeated shallow cycling — frequent top-ups without full discharge cycles accelerate capacity fade on Li-ion packs. A full discharge-to-cutoff followed by a complete charge often restores a few percentage points of usable capacity.

My RY40210 barely runs in cold weather — is the battery damaged?

No damage — Li-ion internal resistance rises sharply below 5°C, which limits how much current the cells can deliver without the BMS tripping on a voltage dip. Store the battery indoors at room temperature before a cold-morning session and install it in the tool just before use. Expect noticeably lower output until the cells warm up from their own heat during the first few minutes of operation; performance recovers as cell temperature climbs above 10°C.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.