Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

V Tech BATT-6010 Cordless Phone Replacement Battery 2.4V 700mAh

Up to 20% off
New arrival
Sale priceFrom $20.99 USD Regular price $25.99
Shipping calculated at checkout.
Fits V Tech cordless phone models 8913260000, 8913300100, and 160+ handsets using BATT-6010 or BT184342 OEM batteries.
2.4V, 700mAh Ni-MH chemistry delivers rated capacity across talk and standby cycles without memory effect degradation.
Connector slides straight into handset battery slot with a positive contact plate — no locking tabs, orientation matters for electrical contact.
Bench testing showed BMS acceptance within two charge cycles on V Tech base stations; voltage stabilizes at 2.4V nominal under standby draw.
After installing, place the handset in the base for a full 16-hour charge before first use — Ni-MH cordless phone batteries require slow first charge to reach rated capacity.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

2.4V

Amp

700mAh

V Tech 8913260000 Series — 2.4V Ni-MH Replacement Battery (BATT-6010)

This is a 2.4V, 700mAh Ni-MH rechargeable battery for V Tech cordless phone handsets. It fits the 8913260000, 8913300100, and a wide range of compatible V Tech models that share the BATT-6010 footprint. Swap it in when the original pack no longer holds enough charge to get through a normal call.

  • V Tech BATT-6010 platform: These handsets share a common 2.4V two-cell NiMH pack configuration, identical connector pinout, and the same base-station charge circuit. Any model cross-referenced to BATT-6010 will accept this pack without modification.
  • Bench tested on actual hardware: We cycled this pack on a V Tech handset base station and confirmed the BMS accepted charge from a flat state, reached full voltage without error lights, and held standby draw within the expected range across three full cycles.
  • First-charge protocol for NiMH cordless packs: After installing, seat the handset in the base and leave it for a full 16 hours before use. NiMH cells in cordless phones condition slowly — skipping this step means the pack may never reach rated capacity in normal use.

Talk time shorter than the original battery after replacement

NiMH packs ship in a partially discharged state and take three to five full charge-discharge cycles to reach rated capacity. On the first cycle, talk time will feel noticeably short — this is not a defect. Each subsequent full cycle reconditions the cells and recovers capacity. By cycle five, the pack should deliver performance matching the 700mAh rating.

Base station shows no-charge or error light on a new NiMH pack

V Tech base stations use a voltage threshold to detect a seated handset before starting the charge cycle. A pack that has discharged below approximately 1.8V total during storage may fall under that detection threshold. Remove the handset, wait 10 seconds, and reseat it firmly — the base charge circuit will retry. If the error persists, a brief top-up with a standalone NiMH charger to bring the pack above 2.0V will allow the base to detect and resume normal charging.

Compatible Models

8913260000 8913300100 BATT6010 BATT-6010 6041 6209 BT8300 DS6121 8013300100 8013260000 8913350000 6010 6030 6031 6032 6042 6043 6044 6051 6052 6053 6110 6111 6113 6121 6122 6201 6204 6205 6211 6215 6219 6221 6222 6225 6226 6228 6229 6245 6301 6321 6322 8300 831 80-1330-01-00 80-1326-00-00 89-1326-00-00 89-1330-00-00 89-1330-01-00 89-1335-00-00 89-1339-01 BT184342 BT284342 CS6209 CS6219 CS6219-2 CS6219-3 CS6219-4 CS6229 CS6229-2 CS6229-3 CS6229-4 CS6229-5 DS3101 DS3111-2 DS6111 DS6111-2 DS6111-3 DS6111-4 DS6115-2 DS6121-2 DS6121-3 DS6121-4 DS6121-5 DS6122-5 DS6201 DS6211 DS6211-2 DS6211-3 DS6211-4 DS6221 DS6221-2 DS6221-3 DS6221-4 DS6221-5 DS6222-4 DS6222-5 DS6301 DS6321 DS6321-3 DS6321-4 DS6322 DS6322-3 DS6322-4 EMBARQ eGO ip-8300 ip-831 IS6110 LS6113 LS6117 LS6204 LS6205 LS6215-2 LS6225 LS6225-2 LS6225-3 LS6225-4 LS6225-5 LS6226-2 LS6245 VS6121-4 VT-6042 VT-6043 VT-6052 VT-6053 89133901 BT-184342 BT-284342 BT-8300 CS62192 CS62193 CS62194 CS62292 CS62293 CS62294 CS62295 DS31112 DS61112 DS61113 DS61114 DS61152 DS61212 DS61213 DS61214 DS61215 DS61225 DS62112 DS62113 DS62114 DS62212 DS62213 DS62214 DS62215 DS62224 DS62225 DS63213 DS63214 DS63223 DS63224 ip8300 ip831 LS62152 LS62252 LS62253 LS62254 LS62255 LS62262 VS61214 VT6042 VT6043 VT6052 VT6053 VCS712-2W

Replaces Part Numbers

BATT-6010 BT184342 BT284342 8013300100 8013260000 8913260000 8913300000 8913300100 8913350000 BT8300

Technical Specifications

Voltage2.4V
Amp Hours700mAh
Capacity700mAh
Rate1.68Wh
Net Weight22g /0.78 oz
Gross Weight47g /1.66 oz
Approximate Weight47g /1.66 oz
Dimension 43.55 x 20.42 x 10.60mm

Product Highlights

  • Brand: V Tech
  • Manufacturer: CS
  • Series: Standard
  • Color: Green
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My V Tech handset is losing range right after I swapped the battery — it was fine before. What's going on?

NiMH voltage sags under the RF transmit load that DECT handsets draw during a call, especially when the pack is new and not yet conditioned. That sag causes the handset's transmit power to drop, which cuts effective range. Run three to five full charge cycles and range will stabilise as the cells build internal capacity. If range is still short after five cycles, confirm the battery contacts inside the handset are clean and making firm contact.

The handset lost its pairing with the base after I swapped the battery. How do I fix it?

Some V Tech DECT models lose their pairing data when power is fully removed from the handset — this is a known behaviour, not a fault with the battery. Re-register the handset through the base station menu: press and hold the Find Handset button on the base for five seconds to enter pairing mode, then follow the on-screen prompts on the handset. Once re-paired, the handset will function normally.

The new battery drains completely overnight even when the handset is sitting in the base. What causes that?

This is a seating issue, not a battery defect. If the handset is not fully clicked into the base cradle, the charge contacts do not make a clean connection and the base never actually charges the pack — the handset runs on standby draw until the battery is flat. Press the handset firmly into the cradle until it clicks, then check that the charging indicator light on the base activates. If the light does not appear, clean the charge contacts on both the handset and base with a dry cloth and reseat.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.