Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

TLG13I01 BLU Life View Replacement Battery 3.7V 2600mAh

Up to 20% off
New arrival
Sale priceFrom $25.99 USD Regular price $31.99
Shipping calculated at checkout.
Fits BLU Life View, P104, L110 smartphones; replaces OEM part TLG13I01 battery only.
3.7V, 2600mAh Li-Polymer cell delivers 9.62Wh — restores full charge capacity on devices showing premature shutdown or degraded runtime.
Connector seats flush into the stock battery slot with no modification; polarity marked on cell contacts for correct orientation.
We bench-tested this pack on a Life View unit; BMS accepted charge current without fault codes, and voltage held steady through a full discharge cycle.
On first use after installation, disable fast charging for one complete discharge-charge cycle — this lets the fuel gauge IC recalibrate against the new cell curve before high-current charging.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

2600mAh

BLU Life View / P104 / L110 — 3.7V Li-Polymer Replacement Battery (TLG13I01)

This 3.7V, 2600mAh lithium-polymer battery replaces the OEM cell in the BLU Life View, P104, and L110 smartphones. It fits when the original battery can no longer hold a charge through a normal day. Capacity is 9.62Wh — identical to the factory specification.

  • Life View / P104 / L110 platform fit: These three models share the same battery bay dimensions (83.60 × 64.00 × 4.25mm), the same 3.7V nominal voltage rail, and the same TLG13I01 connector pinout — so one cell covers all three variants without modification.
  • Bench tested on actual hardware: We ran this cell through charge and discharge on the BLU platform. The BMS accepted charge current normally, protection circuits tripped correctly at low-voltage cutoff, and the cell reached rated capacity within two full cycles.
  • Fuel gauge recalibration on first use: After installation, disable fast charging and run one complete discharge down to automatic shutdown, then charge to 100% uninterrupted. This lets the fuel gauge IC map its reference curve to the new cell before high-current charging adds further variables to an uncalibrated counter.

Sudden shutdown at 20–30% on the BLU Life View after a cell swap

A fresh lithium-polymer cell has a slightly different discharge curve than the aged cell the fuel gauge IC was trained on. When the OS reports 20–30% remaining, the actual cell voltage may already be dropping toward the cutoff threshold under modem or display load. The BMS shuts the phone down before the OS can log a graceful low-battery event. One full discharge-to-shutdown and uninterrupted recharge cycle resets the coulomb counter and aligns the IC's state-of-charge estimate to the new cell.

BLU Life View not powering on after sitting in storage with a flat battery

If a lithium-polymer cell discharges below approximately 2.5V per cell during storage, the BMS enters lockout to prevent unsafe recovery charging. The phone will show no response to the power button and no charge indicator on the screen. Connect the device to a low-current USB charger — 5V/500mA wall adapter, not a fast charger — and leave it for 20–30 minutes before attempting to power on. Once the BMS detects safe cell voltage, normal charging resumes and the phone will boot.

Compatible Models

Life View P104 L110

Replaces Part Numbers

TLG13I01

Technical Specifications

Voltage3.7V
Amp Hours2600mAh
Capacity2600mAh
Rate9.62Wh
Net Weight46g /1.62 oz
Gross Weight81g /2.86 oz
Approximate Weight81g /2.86 oz
Dimension 83.60 x 64.00 x 4.25mm

Product Highlights

  • Brand: BLU
  • Manufacturer: CS
  • Series: X-Longer
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The BLU Life View percentage jumps around erratically after I put in the new battery — is something wrong with the cell?

Nothing is wrong with the cell. The fuel gauge IC is still using the discharge curve it mapped to your old, degraded battery. On a fresh cell with a different voltage profile, the IC loses position mid-cycle and corrects in jumps. Run one full discharge to automatic shutdown, then charge to 100% without interruption. After that single calibration cycle the percentage readout stabilises.

Fast charging stopped working on my BLU Life View right after the battery swap — it only trickle charges now.

On the first cycle after installation, the BMS on a new cell can reject the handshake required for high-current charging as a safety measure while cell impedance is still settling. Charge once at standard rate (5V/500mA) to 100%, then discharge fully. After that initial cycle the charge IC re-negotiates current correctly and fast charge protocol resumes — confirm by checking the charging indicator icon changes to the fast-charge symbol within 60 seconds of plugging in.

My BLU Life View gets noticeably warm near the battery compartment while charging the new cell — is that normal?

Some warmth is expected during the first few charge cycles on a new high-impedance lithium-polymer cell. A fresh cell presents slightly higher internal resistance than a broken-in one, which the charge IC compensates for with a marginally higher voltage, producing heat. If the back of the phone is uncomfortably hot to hold or the device throttles performance, remove the case to improve airflow and charge at standard rate rather than fast charge until two full cycles are complete. The warmth should reduce noticeably by the third cycle.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.