Hytera DP505 BL1502 Compatible Battery 7.4V 1500mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Hytera DP505 BL1502 Compatible Battery 7.4V 1500mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Hytera DP505 BL1502 Compatible Battery 7.4V 1500mAh - is backordered and will ship as soon as it is back in stock.
Voltage
7.4V
Amp
1500mAh
Hytera DP505 / PD402 Series — 7.4V Li-ion Replacement Battery (BL1502)
This 7.4V, 1500mAh lithium-ion battery replaces the Hytera BL1502, BL1504, BL2010, BL2020, and BL2020-EX packs. It fits the DP505, PD402, PD405, PD406, and over 39 additional Hytera digital portable radio models. Voltage and capacity match the original specification exactly.
- DP500 / PD400 platform fit: These models share the same battery bay dimensions, connector pinout, and BMS handshake protocol. One pack covers the full range without modification or adapters.
- Bench tested on actual hardware: We ran this pack through full charge cycles on a DP505 and PD405 dock. The BMS negotiated correctly on both units — charge accepted, no fault LED, cells balanced within spec at top of charge.
- First insertion contact check: If the charger dock shows a fault LED on first insertion, remove the pack, wipe the gold contact strip with a dry cloth, and reseat firmly. The Hytera dock requires a clean contact cycle to complete the BMS handshake before charging will start.
Why the DP505 cuts out mid-transmission on a new BL1502
During PTT, the DP505 transmitter draws a sharp current spike — typically 1.5–2A above standby draw — in the first 200ms of keying. A new cell shipped at storage voltage (around 3.7V per cell) has higher internal impedance than a fully cycled cell. The BMS reads the resulting voltage sag as an unsafe drop and trips the overcurrent protection. Run two full charge-discharge cycles before field use and the impedance drops to normal operating range.
Bar indicator showing one fewer bar than expected on a fresh pack
The DP505 uses a voltage-threshold bar indicator — each bar corresponds to a voltage band, not a calibrated capacity reading. A new cell at storage voltage sits at roughly 3.75V per cell, which falls into the second or third bar threshold rather than full. This is not a fault with the pack. Charge the battery fully to 4.2V per cell before reading the indicator — all bars will display correctly once the cells reach peak charge voltage.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Hytera
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My DP505 shuts off the moment I press PTT — is the new battery causing this?
Yes, and it's a BMS overcurrent trip, not a faulty cell. New cells at storage voltage have higher impedance, so the transmit current spike causes a sharp voltage sag the BMS reads as unsafe. Run two full charge-discharge cycles to condition the cells and lower impedance. After that, the pack will handle the TX current spike without tripping.
The charger dock blinks a fault LED and never starts charging — what do I do?
The Hytera dock requires clean contact with all pins before it will attempt a BMS handshake. Remove the pack, wipe the gold contact strip with a dry cloth, check for any debris in the dock contacts, then reseat the battery firmly. If the fault LED clears within 10 seconds, charging will begin — if not, check that the dock supply voltage is at the rated input before assuming the pack is the issue.
The radio drops to noticeably weaker audio and TX output mid-shift even though the battery shows bars — what's happening?
This is voltage sag under sustained RF output, not a bar indicator error. As the cells discharge toward the lower voltage threshold during a heavy shift, output power scales back to protect the transmission circuit. It is not a pack defect — it means the cells are approaching the cutoff band. Swap to the charged spare and put the depleted pack on the dock; charge the depleted pack to 4.2V per cell before the next shift.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





