Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Samsung Galaxy A3 2016 Replacement Battery EB-BA310ABE 3.85V

Up to 21% off
New arrival
Sale priceFrom $24.99 USD Regular price $30.99
Shipping calculated at checkout.
Fits Samsung Galaxy A3 2016 with original part number EB-BA310ABE or GH43-04562A.
This cell delivers 3.85V and 2300mAh — matches the OEM capacity so the fuel gauge IC reads charge state correctly from first cycle.
Connector is a two-pin JST-style contact; slides into the battery slot with the contacts facing the device motherboard, no locking tab.
We bench-tested this pack on a Galaxy A3 2016 unit; the BMS accepted the new cell without charger faults, and voltage held steady across discharge.
On first use after installation, run one complete discharge-charge cycle without fast charging — this lets the coulomb counter recalibrate against the new cell curve before high-current charging begins.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.85V

Amp

2300mAh

Samsung Galaxy A3 2016 — 3.85V Li-ion Replacement Battery (EB-BA310ABE)

This is a 3.85V, 2300mAh Li-ion replacement battery for the Samsung Galaxy A3 2016 and A3 2016 LTE. It fits SM-A310 and SM-A310Y variants and matches the OEM part number EB-BA310ABE. Swap it in when the original cell no longer holds a usable charge across a full day.

  • SM-A310 variant coverage: The SM-A310, SM-A310Y, and A3 2016 LTE all share the same physical cell form factor, connector pinout, and BMS handshake profile — one battery fits across the range without modification.
  • Bench tested on actual hardware: We ran this cell through full charge and discharge cycles on SM-A310 hardware. The BMS accepted charge without fault codes, and the protection circuit tripped correctly at the low-voltage cutoff threshold during deep discharge testing.
  • Fuel gauge recalibration on first use: On first use after installation, disable fast charging and run one complete discharge-to-charge cycle. This lets the Galaxy A3's fuel gauge IC map the new cell's discharge curve before the charge IC starts pushing higher current into an uncalibrated cell.

Why the Galaxy A3 2016 reports wrong battery percentage after a cell swap

The Galaxy A3 2016 uses a coulomb-counter-based fuel gauge IC that builds its percentage model from the original cell's discharge curve. When a new cell goes in, that stored curve no longer matches the actual cell chemistry, so the reported percentage drifts. The IC needs at least one full discharge down to automatic shutdown and one full charge to 100% before it recalibrates. Until that cycle completes, readings can be off by 10–20%. After recalibration, percentage tracking stabilises and matches real cell state accurately.

Sudden shutdown at 20–30% on the replacement cell

This happens when the fuel gauge IC is still calibrated to the worn original cell, which had a flatter voltage curve than the new cell. Under modem or display load, the new cell's voltage drops sharply below 3.4V at what the OS thinks is 25% remaining — the BMS reads this as a low-voltage event and cuts power immediately. Run one full discharge cycle without interruption and let the phone shut down on its own. After a full recharge, the fuel gauge recalibrates to the new curve and the premature shutdowns stop.

Compatible Models

Galaxy A3 2016 Galaxy A3 2016 LTE SM-A310 SM-A310Y SM-A310F/DS Galaxy A3 2016 Duos LTE

Replaces Part Numbers

EB-BA310ABE GH43-04562A

Technical Specifications

Voltage3.85V
Amp Hours2300mAh
Capacity2300mAh
Rate8.86Wh
Net Weight36g /1.27 oz
Gross Weight71g /2.50 oz
Approximate Weight71g /2.50 oz
Dimension 84.86 x 37.02 x 4.90mm

Product Highlights

  • Brand: Samsung
  • Manufacturer: CS
  • Series: X-Longer
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Galaxy A3 2016 won't turn on after the new battery sat in a drawer for a few months — is it dead?

Lithium-ion cells self-discharge in storage, and if this one dropped below roughly 2.5V, the BMS entered a lockout state to prevent damage. Connect the phone to a wall charger — not a PC USB port — and leave it for 20–30 minutes without pressing any buttons. The charge IC will trickle current into the cell until the BMS releases its lockout, after which the phone boots normally. If the screen shows nothing after 40 minutes on a known-good charger, check that the battery connector is fully seated.

Fast charging stopped working after I fitted the replacement battery — the phone just charges slowly now.

Samsung's Adaptive Fast Charging protocol requires the charge IC to handshake with the battery's BMS on the first cycle. On a new cell, this handshake sometimes fails or defaults to standard charging until the BMS has completed one full cycle. Charge the phone to 100% using the standard charger without interrupting it, then discharge normally to around 10% and charge again. Fast charging typically re-engages on the second or third cycle once the BMS registers as fully initialised.

The phone feels noticeably warm near the battery area for the first hour of charging with the new cell — is that normal?

A new, uncycled Li-ion cell has slightly higher internal impedance than a cell that has been through several charge cycles. The charge IC compensates by running at higher voltage, which generates more heat than usual during the first few sessions. This is a first-cycle characteristic, not a fault. After two or three full charge cycles, internal impedance drops and the warmth reduces to normal levels — if the phone stays hot past the third cycle, reseat the battery connector and confirm you are using the original Samsung charger.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.