Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Fey Elektronik PA-LN2 Replacement Battery 3.7V 2200mAh

Up to 20% off
New arrival
Sale priceFrom $27.99 USD Regular price $34.99
Shipping calculated at checkout.
Fits Fey Elektronik PA-LN2 and replaces OEM battery pack part reference for this model.
3.7V and 2200mAh capacity delivers full runtime to portable Fey Elektronik devices on single charge.
Connector type and orientation match OEM pack; physical dimensions 52.60 x 34.20 x 11.00mm slot directly.
We bench-tested the cell under load cycling; BMS accepted charge input and discharged at rated voltage.
After install, run one complete charge-discharge cycle before relying on the device fuel gauge calibration.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

2200mAh

Fey Elektronik PA-LN2 — 3.7V Li-ion Replacement Battery

This is a 3.7V, 2200mAh (8.14Wh) Li-ion battery pack built to fit the Fey Elektronik PA-LN2. It replaces a degraded or failed original pack and restores full operation to the device. Dimensions are 52.60 × 34.20 × 11.00mm — verify these against your existing pack before ordering.

  • PA-LN2 fit: This pack matches the PA-LN2's voltage rail and physical envelope. The connector orientation and cell configuration align with the original spec, so the device's charge circuit sees the pack as expected.
  • Bench tested on actual hardware: We ran this pack through charge and discharge cycles on the bench. The BMS held cutoff at the correct thresholds and the pack reached rated capacity after the first full cycle.
  • First-cycle calibration: If your PA-LN2 uses an integrated fuel gauge, run one complete charge-discharge cycle immediately after installation. New cells arrive at storage voltage, and the gauge needs a full cycle to map capacity accurately against the fresh cells.

Pack running below 3.7V on first use

Replacement packs ship at storage voltage — typically around 3.6V or lower — to reduce cell stress during transit. This is normal and not a fault. The device may show a low-battery indicator or behave sluggishly until the pack is fully charged. Charge to 100% before the first use and the voltage will stabilise at the rated 3.7V nominal.

Pack not reaching full charge on the first cycle

On the first charge cycle, the PA-LN2's charge IC may apply a reduced current to new cells as a conditioning step — this can cause the charge cycle to terminate earlier than expected. The pack is not defective. Run a full discharge and then charge again; the charge IC adjusts after the first cycle and the pack will accept the full 2200mAh on subsequent charges.

Compatible Models

PA-LN2

Technical Specifications

Voltage3.7V
Amp Hours2200mAh
Capacity2200mAh
Rate8.14Wh
Net Weight44g /1.55 oz
Gross Weight69g /2.43 oz
Approximate Weight69g /2.43 oz
Dimension 52.60 x 34.20 x 11.00mm

Product Highlights

  • Brand: Fey Elektronik
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My PA-LN2 isn't recognising the new battery pack — it powers off immediately after I insert it. What's happening?

The device is likely doing a voltage range check on insertion and rejecting the pack because it arrived at storage voltage, which can fall below the device's minimum acceptance threshold. Charge the pack fully via the OEM charger first, then re-insert it. If the device still rejects it, power cycle the device once with the pack seated. A full charge brings the cell voltage into the range the BMS handshake expects.

The battery feels warm during the first charge — is that a problem with this pack?

Mild warmth during the first charge is normal for a new Li-ion pack going through its initial conditioning cycle. The cells are accepting current from a low storage state, which generates slightly more heat than a routine top-up charge. If the pack becomes hot to the touch or the device's charging indicator cuts out early, stop the charge and let it cool to room temperature before resuming. A conditioning-cycle pack should not exceed warm-to-the-touch.

The capacity indicator on my PA-LN2 is reading incorrectly after swapping the battery — it jumps around or shows full when the pack is nearly flat. How do I fix it?

This happens when the fuel gauge's stored capacity data doesn't match the new cells. The gauge calibrated itself against the old pack and needs to relearn. Run one complete charge to 100%, then discharge the device until it shuts off on its own, then charge back to 100% without interruption. After that single full cycle, the gauge recalibrates and the reading will track accurately against the new 2200mAh pack.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.