Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Konftel 55W Conference Phone Compatible Battery 3.7V 1800mAh

Up to 20% off
New arrival
Sale priceFrom $34.99 USD Regular price $43.99
Shipping calculated at checkout.
Fits Konftel 55W and 55WX conference phones replacing OEM part 900102095.
3.7V at 1800mAh delivers sufficient capacity for full conference sessions without mid-call dropouts.
Connector slides straight into the battery slot with a single locking tab — ensure full seating before closing the cover.
We bench tested this pack at sustained 500mA draw; the BMS held steady output with no early cutoff during eight-hour simulation.
After installation, run one complete charge cycle before your first meeting — the Konftel platform recalibrates battery state during normal operation and may show inaccurate warnings after a swap.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1800mAh

Konftel 55W / 55WX Conference Phone — 3.7V Li-ion Replacement Battery (900102095)

This 3.7V, 1800mAh Li-ion battery replaces OEM part 900102095 in the Konftel 55W and 55WX conference phones. These are portable business conference units used for wireless meeting calls. Install this pack to restore untethered operation when the original cell no longer holds a useful charge.

  • 55W and 55WX compatibility: Both models share the same battery bay, connector pinout, and BMS handshake protocol — one pack covers both. The voltage rail and physical form factor are identical across the two units.
  • Bench tested on actual hardware: We cycled this pack through a 55W unit and confirmed the BMS completed a full charge handshake, the fuel gauge updated correctly, and the unit powered on without triggering a fault state.
  • First-session calibration tip: After installing, run a complete charge cycle before your first meeting. The 55W maps battery state during normal operation, so the charge indicator may read inaccurately for one session until the system establishes a voltage baseline with the new cell.

Battery indicator showing the wrong level after a pack swap

The 55W uses a voltage-threshold method to estimate charge level. A new pack from storage sits at a resting voltage the unit hasn't seen before, so the indicator often reads low or jumps erratically for the first session. This is not a fault in the battery. Run the unit through one full charge from flat to 100% and the indicator will recalibrate to the new cell's voltage curve.

Conference unit not turning on after a battery swap

Replacement packs stored in a warehouse can drop below the BMS low-voltage lockout threshold — typically under 2.5V per cell for a 3.7V Li-ion pack. When that happens, the unit receives no power and shows no response at all. Connect the unit to the original Konftel charger and leave it for at least 30 minutes before attempting to power on. Most BMS circuits will accept a trickle charge at this point and step up to normal charging once the cell recovers above the lockout floor.

Compatible Models

55W Conference Phone 55WX Conference Phone

Replaces Part Numbers

900102095

Technical Specifications

Voltage3.7V
Amp Hours1800mAh
Capacity1800mAh
Rate6.66Wh
Net Weight40g /1.41 oz
Gross Weight65g /2.29 oz
Approximate Weight65g /2.29 oz
Dimension 64.88 x 37.00 x 11.70mm

Product Highlights

  • Brand: Konftel
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The 55W powers on but drops off the wireless network during a long call — is the battery causing this?

Yes, this is a known voltage sag symptom. Under sustained combined audio processing and wireless transmission draw, a degraded or low-charge cell can't hold the voltage rail steady, and the unit drops its wireless link to protect the circuit. Charge the battery fully before the meeting and check whether the drop-outs stop — if they do, the old cell was sagging under load and this replacement pack will resolve it.

My Konftel 55W feels noticeably warm during extended conference sessions — is that normal with a new battery?

Some warmth is expected. The 55W housing is compact and encloses the battery closely, so heat from sustained wireless and audio draw has limited airflow to dissipate through. The pack is rated for normal operating temperatures well above what a standard meeting generates. If the unit becomes hot to the touch or shuts itself down, check that the battery contacts are fully seated and the ventilation slots on the underside of the unit are clear.

The charging dock isn't registering the new battery — the charge light never comes on.

Dock contact resistance is the most common cause. Storage handling can leave a light residue on the battery's contact pads that's enough to interrupt the charge circuit. Remove the pack, wipe the gold contacts on both the battery and the dock with a dry cloth, reseat the pack firmly, and recheck. If the charge light still doesn't activate, confirm the dock cable is delivering power — measure at the adapter output and look for 5V DC.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.