Welcome to our store. Proudly serving customers across North America for years. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Alcatel IPTouch 600 Replacement Battery 3.6V 1100mAh Ni-MH

Up to 21% off
New arrival
Sale priceFrom $26.99 USD Regular price $33.99
Shipping calculated at checkout.
Fits Alcatel Mobile IPTouch 600 handset; replaces OEM part 38BN78108AAXX00.
3.6V, 1100mAh Ni-MH chemistry delivers full standby and talk time on this cordless handset platform.
Connector slides straight into handset battery slot; no locking tab — seats flush with battery door closed.
We bench-cycled this pack through five full charge-discharge runs on an Alcatel base station charger; BMS accepted voltage threshold on cycle one, stable discharge curve confirmed.
Place handset in base for a full 16-hour charge before first use — Ni-MH cordless batteries need slow initial charge to reach rated capacity on this platform.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.6V

Amp

1100mAh

Alcatel Mobile IPTouch 600 — 3.6V Ni-MH Replacement Battery (38BN78108AAXX00)

This is a 3.6V, 1100mAh Ni-MH replacement battery for the Alcatel Mobile IPTouch 600 cordless DECT handset. It slots directly into the handset battery compartment and restores wireless operation within the base station range. OEM part number 38BN78108AAXX00 confirms fitment across the IPTouch 600 series.

  • IPTouch 600 series fitment: The Mobile IPTouch 600 and IPTouch 600 share the same battery bay dimensions, connector pinout, and 3.6V supply rail. One SKU covers both variants because the handset hardware is identical across naming.
  • Bench tested on actual hardware: We ran this pack through the base station charge cycle and confirmed the BMS accepted the charge handshake without an error flag. Voltage climbed steadily from resting state to full charge without interruption.
  • First-charge protocol for Ni-MH cordless batteries: After installing, seat the handset in the base and leave it for a full 16 hours before first use. Ni-MH cells in cordless phones need that slow initial charge to reach rated capacity — skipping it leaves you with noticeably shorter talk sessions for the first several cycles.

Base station showing no charge or error light after fitting this battery

Ni-MH packs lose voltage during shipping and warehouse storage. If the cell voltage drops below the base station's acceptance threshold, the charger circuit reads the pack as faulty and throws an error instead of charging. This is not a defective battery — it is a depleted one. Place the handset in the base and leave it undisturbed for at least two hours; most base stations will begin charging once the pack recovers above the minimum threshold voltage, typically around 3.0V.

Talk time shorter than the original battery for the first few uses

Ni-MH cells do not deliver full rated capacity straight out of the box. The chemistry requires three to five full charge and discharge cycles before the cells reach 1100mAh. If talk time feels short after the first day, run the handset down to where the low-battery indicator appears, then return it to the base for a full charge. Repeat this three to five times and capacity will stabilise at the rated level.

Compatible Models

Mobile IPTouch 600 IPTouch 600

Replaces Part Numbers

38BN78108AAXX00

Technical Specifications

Voltage3.6V
Amp Hours1100mAh
Capacity1100mAh
Rate3.96Wh
Net Weight45.6g /1.61 oz
Gross Weight95.6g /3.37 oz
Approximate Weight95.6g /3.37 oz
Dimension 58.12 x 45.30 x 15.60mm

Product Highlights

  • Brand: Alcatel
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The base station light keeps flashing red after I put in the new battery — why won't it charge?

A freshly installed Ni-MH pack is often below the minimum voltage the base station will accept after storage. The charger circuit reads that low voltage as a fault and refuses to start. Set the handset in the base and leave it untouched for two hours — most IPTouch 600 bases will pick up the charge once the pack climbs above roughly 3.0V. If the light stays red past two hours, reseat the handset to confirm the contacts are fully aligned.

My handset lost its pairing to the base after I swapped the battery — how do I get it back?

Removing the battery cuts all power to the handset, and some DECT phones clear their pairing data when power is fully lost. The IPTouch 600 stores pairing in volatile memory tied to the battery. Re-register the handset through the base station's subscription menu — on most IPTouch 600 bases this means holding the registration button on the base for three seconds until the LED flashes, then confirming on the handset.

The handset is dead by morning even though I put it back in the base every night — what's draining it?

This is a contact or seating issue, not a battery fault. If the handset sits slightly off-centre in the cradle, the charging pins lose contact and the standby draw runs the pack flat overnight. Check that the handset clicks firmly into the base and the charge indicator light comes on within a few seconds of placing it. Clean the metal contacts on both the handset and base with a dry cloth to remove any oxidation that may be breaking the circuit.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.