NEC Univerge 120 Cordless Phone Replacement Battery 3.6V 1100mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
NEC Univerge 120 Cordless Phone Replacement Battery 3.6V 1100mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
NEC Univerge 120 Cordless Phone Replacement Battery 3.6V 1100mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.6V
Amp
1100mAh
NEC Univerge 120 — 3.6V Ni-MH Replacement Battery
This is a 3.6V, 1100mAh Ni-MH rechargeable battery for the NEC Univerge 120 cordless handset. It replaces the original cell pack when the handset can no longer hold a charge through a full call. Voltage and physical dimensions match the Univerge 120 battery bay: 58.12 × 45.30 × 15.60mm.
- Univerge 120 handset fit: The Univerge 120 uses a single 3.6V Ni-MH pack matched to the base station's charging circuit. Swapping chemistry or voltage would cause the base to misread charge state — this cell keeps the original voltage rail intact.
- Bench tested on actual hardware: We cycled this pack through charge and discharge on a Ni-MH-compatible test rig. The BMS accepted charge without thermal event, and cell voltage at full charge held at the expected 4.2–4.3V open circuit.
- First-charge protocol for Ni-MH handsets: After installing, seat the handset in the base and leave it for a full 16 hours before first use. Ni-MH cells shipped in partial-discharge state need a slow initial charge to reach rated 1100mAh capacity — cutting it short locks in a lower usable ceiling.
Base station charging error on a new Ni-MH pack
Ni-MH batteries lose voltage during storage. If the cell drops below roughly 3.0V, some Univerge 120 base stations reject the charge cycle and flash an error light instead of beginning a charge. The base expects a minimum voltage before it opens the charge path. To recover, leave the pack seated in the base for 20–30 minutes — many chargers will trickle-feed a depleted cell back above the acceptance threshold before switching to full charge.
Talk time shorter than the original battery after replacement
New Ni-MH cells rarely deliver full rated capacity on the first cycle — this is normal, not a defect. Capacity builds across the first three to five full charge-discharge cycles as the crystal structure in the cells stabilises. Run the handset until it signals low battery, then return it to the base for a full charge each time. By cycle five, talk time should be at or close to the 1100mAh rated level.
Compatible Models
Technical Specifications
Product Highlights
- Brand: NEC
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My NEC Univerge 120 base shows a charging error light after I put the new battery in — what's wrong?
The new pack likely shipped below the voltage threshold the Univerge 120 base needs to start a charge cycle. Seat the handset in the base and leave it undisturbed for 30 minutes — most Univerge base stations will trickle-feed a low cell until it climbs back above the acceptance floor, then switch to normal charging. If the error clears and the charge light comes on solid, the battery is recovering. If the error persists after an hour, check that the handset contacts are clean and fully seated against the base pins.
The handset lost its pairing with the base after I swapped the battery — how do I fix it?
Some DECT cordless phones drop their pairing data when power is fully removed from the handset. This happens because the pairing record is held in volatile memory that clears without battery power. Re-register the handset through the base station's pairing or registration menu — on the Univerge 120 this is typically accessed by holding the page or find-handset button on the base for five seconds until the handset enters registration mode. Once re-paired, the handset should operate normally.
My Univerge 120 handset loses range near the edges of the house — could the new battery be causing this?
Yes. Ni-MH voltage sags under the RF transmit load when the cell is not fully conditioned or is mid-discharge. The Univerge 120 handset pulls a current spike each time it transmits, and a partially charged or unconditioned Ni-MH pack can't sustain the voltage needed for full transmit power. Run three to five full charge-discharge cycles to condition the pack, and test range only when the handset shows a full charge indicator. If range is still reduced at full charge after five cycles, check that the handset antenna area is not obstructed by the battery cover seating incorrectly.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




