Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Asus Memo Pad Me102 Compatible Battery 3.75V 4900mAh

Up to 20% off
New arrival
Sale priceFrom $36.99 USD Regular price $45.99
Shipping calculated at checkout.
Fits Asus Memo Pad Me102, Me102a, and K00F tablets; replaces OEM part C11P1314.
3.75V, 4900mAh lithium-polymer cell delivers 18.38Wh to the 10-inch display and WiFi subsystem.
Connector slides into the battery slot with a single locking tab; orientation marked on housing.
We bench-tested this cell in the Me102 frame; BMS accepted charge at first insertion without fault codes.
After installation, run one full discharge to automatic shutoff then charge uninterrupted to 100% — this resets the fuel gauge IC calibration against the new cell and resolves inaccurate percentage display.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.75V

Amp

4900mAh

Asus Memo Pad ME102 / ME102A — 3.75V Li-Polymer Replacement Battery (C11P1314)

This is a 3.75V, 4900mAh Li-Polymer battery for the Asus Memo Pad ME102 and ME102A 10-inch Android tablets (model codes K00F). It replaces OEM part C11P1314. If your tablet no longer holds a charge or shuts down unexpectedly, this cell restores full power capacity.

  • ME102 and ME102A platform fit: Both the ME102 and ME102A use the same C11P1314 cell with a matching connector pinout, cell dimensions of 162.32 x 82.15 x 3.16mm, and the same charge IC handshake. One battery covers both variants.
  • Bench tested on actual hardware: We cycled this cell through the ME102 charge IC and confirmed BMS cutoff behaviour at both low-voltage floor and high-voltage ceiling. Cell voltage held within spec across multiple charge cycles with no anomalous cutoff events.
  • Fuel gauge recalibration after swap: After fitting this battery, run the tablet down to automatic shutoff, then charge uninterrupted to 100% without unplugging early. This single full cycle resets the fuel gauge IC against the new cell and clears the inaccurate percentage readings that appear immediately after installation.

Tablet shutting down at 15–25% after battery replacement

The ME102 shuts down before reaching 0% because the fuel gauge IC is still calibrated to the old, degraded cell. It interprets the new cell's voltage curve as critically low earlier than it actually is. Under combined display and Wi-Fi load, voltage sags briefly and triggers the cutoff threshold. One full discharge-to-shutoff followed by an uninterrupted charge to 100% resets the calibration and resolves premature shutdowns.

Fast charging unavailable on ME102 after battery swap

If the ME102 reverts to slow charging after a battery replacement, the charge IC typically needs one completed charge cycle before it re-negotiates the charge rate with the new cell. Use the original Asus charger — third-party adapters that don't match the expected voltage profile will stay at baseline charge current. Complete one full charge from low to 100% without interruption. After that cycle, fast charging should resume at the normal rate.

Compatible Models

Memo Pad Me102 Memo Pad Me102a K00F Me102 Me102a ME102A 1B MeMo Pad 10 ME102A-1B032A MeMo Pad 10 ME102A-1A030A ME102A 1A MeMo Pad 10 ME102A-1B028A ME102A 1F MeMo Pad 10 ME102A-1F027A MeMo Pad 10 ME102A-1A018A MeMo Pad 10 ME102A-1B023A MeMo Pad 10 K00F MeMo Pad 10 ME102A MeMo Pad 10 ME102A(K00F) Memo Pad

Replaces Part Numbers

C11P1314

Technical Specifications

Voltage3.75V
Amp Hours4900mAh
Capacity4900mAh
Rate18.38Wh
Net Weight93g /3.28 oz
Gross Weight143g /5.04 oz
Approximate Weight143g /5.04 oz
Dimension 162.32 x 82.15 x 3.16mm

Product Highlights

  • Brand: Asus
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Asus ME102 shows the wrong battery percentage after I put the new battery in — is something broken?

Nothing is broken. The fuel gauge IC was calibrated to your old, degraded cell and doesn't yet know the capacity curve of the new one. Run the tablet down until it shuts itself off automatically, then charge it uninterrupted to 100%. That single cycle recalibrates the gauge against the new cell and the percentage will read accurately after that.

The ME102 gets warm near the charging port while charging the new battery — should I stop?

Mild warmth at the charge IC area is normal during the first few charge cycles on a new cell. The charge IC runs a slightly higher current while it profiles the new battery's internal resistance. If the tablet becomes hot to the touch or shows a charging error, stop and check the connector seating. Otherwise, leave it charging — warmth alone on a new cell is not a fault.

My ME102 percentage drops faster than expected from 100% down to around 60%, then slows — what's happening?

This is fuel gauge drift. The gauge IC hasn't finished mapping the new cell's discharge curve and it over-reports capacity loss in the upper range while it recalibrates. It corrects itself after one or two full discharge-to-shutoff and charge-to-100% cycles. Run two complete cycles without interruption and the percentage drop rate will level out across the full charge range.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.