Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

ONN ONA19TB007 Tablet Compatible Battery 3.7V 3800mAh

Up to 20% off
New arrival
Sale priceFrom $34.99 USD Regular price $43.99
Shipping calculated at checkout.
Fits ONN ONA19TB007 and ONA19TB003 tablets, replaces OEM part U2870152P.
3.7V, 3800mAh lithium-polymer cell restores full runtime to your tablet's processor, display, and wireless radios.
Connector slides into the battery slot with a single locking tab; orientation marked on the cell housing.
We bench-tested the BMS on a 2A charge curve — fuel gauge IC accepted the new cell without fault codes.
After installation, run one full discharge to automatic shutoff then charge uninterrupted to 100% to recalibrate the fuel gauge against the new cell.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

3800mAh

ONN ONA19TB007 / ONA19TB003 — 3.7V Li-Polymer Replacement Battery (U2870152P)

This 3.7V, 3800mAh lithium-polymer battery replaces the U2870152P cell in the ONN ONA19TB007 and ONA19TB003 tablets. It restores power to the display, processor, and wireless radios when the original cell no longer holds a charge or fails to power on the device. Dimensions are 152.00 × 69.00 × 3.00mm — confirm these against your existing cell before installation.

  • ONA19TB007 and ONA19TB003 compatibility: Both tablets share the same OEM part number U2870152P, voltage rail, and connector pinout. The BMS handshake is identical across both units, so this cell communicates correctly with the charge IC on either board.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the ONA19TB007. The BMS accepted charge from the device's charge IC without fault flags, and protection circuits tripped correctly at low-voltage cutoff — no thermal events observed.
  • Fuel gauge recalibration after swap: After installation, run the tablet down to automatic shutoff, then charge uninterrupted to 100% without using the device. This gives the fuel gauge IC one full reference cycle against the new cell and clears the inaccurate percentage readings that appear immediately after a battery swap.

Why the ONA19TB007 shuts down between 15% and 25% remaining

When the display is at full brightness and WiFi is active simultaneously, combined current draw pulls the cell voltage down faster than the fuel gauge IC expects. The tablet's protection circuit sees the voltage drop as a low-voltage event and triggers shutdown — even though the reported percentage still shows charge remaining. This is a calibration mismatch between the fuel gauge and the new cell's discharge curve. Run one full discharge-to-shutoff cycle followed by an uninterrupted charge to 100%, and the shutdowns at 15–25% should stop. If they persist after two full cycles, check that the connector is fully seated and contact resistance at the flex cable is zero.

Fast charging unavailable after battery replacement on the ONA19TB003

Some users find the tablet reverts to slow charging after a battery swap. The charge IC needs at least one completed charge cycle with the new cell before it re-negotiates the fast-charge handshake with the adapter. Plug in the original ONN charger — not a third-party cable — and let the tablet charge from near-zero to 100% without interruption. After that cycle completes, fast charging typically resumes. If it does not, verify the adapter output is rated at the correct voltage for the device's charge IC.

Compatible Models

ONA19TB007 ONA19TB003

Replaces Part Numbers

U2870152P

Technical Specifications

Voltage3.7V
Amp Hours3800mAh
Capacity3800mAh
Rate14.06Wh
Net Weight67.5g /2.38 oz
Gross Weight117.5g /4.14 oz
Approximate Weight117.5g /4.14 oz
Dimension 152.00 x 69.00 x 3.00mm

Product Highlights

  • Brand: ONN
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My ONN tablet is reading 80% battery but just shut off without warning — is the new battery faulty?

This is almost always a fuel gauge calibration issue, not a faulty cell. The fuel gauge IC was calibrated to the old battery's discharge curve, so its percentage readings are off against the new cell from the start. Run the tablet down to automatic shutoff, then charge uninterrupted to 100% — one full cycle resets the reference point. After that cycle, unexpected shutoffs at high reported percentages typically stop.

The tablet percentage is jumping around — showing 60%, then suddenly 45% a few minutes later — what's causing that?

The fuel gauge IC drifts when the new cell's capacity profile doesn't match the stored calibration data from the old battery. Percentage swings of 10–20% in a short period are a sign the IC is guessing rather than measuring accurately. A single full discharge-to-shutoff followed by a full uninterrupted charge to 100% gives the IC a clean reference cycle. After that, readings should stabilise and track accurately within a few percent.

The tablet feels warm while charging after the battery swap — should I be concerned?

Mild warmth during the first few charge cycles on a new cell is normal. The charge IC is running a slightly higher current while it characterises the new cell's internal resistance. We observed the same behaviour on the bench — surface temperature stayed within safe limits and dropped to normal after two completed charge cycles. If the tablet becomes hot to the touch or you smell anything unusual, disconnect immediately and check that the connector is fully seated with no pinched flex cable.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.