Samsung Galaxy View EB-BT670ABA Replacement Battery 11.1V 4400mAh
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Samsung Galaxy View EB-BT670ABA Replacement Battery 11.1V 4400mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Samsung Galaxy View EB-BT670ABA Replacement Battery 11.1V 4400mAh - is backordered and will ship as soon as it is back in stock.
Voltage
11.1V
Amp
4400mAh
Samsung Galaxy View SM-T670 / SM-T677 — 11.1V Li-ion Replacement Battery (EB-BT670ABA)
This is an 11.1V, 4400mAh Li-ion replacement battery for the Samsung Galaxy View tablet. It fits the SM-T670 and SM-T677 series, including SM-T677A variants. Install it when the original cell no longer holds a charge through normal daily use.
- SM-T670 and SM-T677 series compatibility: These model variants share the same battery bay dimensions, connector pinout, and BMS communication protocol. The EB-BT670ABA part number covers all of them — no wiring adapter or connector swap needed.
- Bench tested on actual hardware: We ran this battery through charge and discharge cycles on a Galaxy View unit. The BMS accepted the full 4400mAh charge without tripping a fault, and cell balancing completed normally before the protection circuit released the load.
- Fuel gauge recalibration after installation: After fitting this battery, run one full discharge to automatic shutoff, then charge uninterrupted to 100%. The Galaxy View's fuel gauge IC was calibrated against the old cell — this single full cycle resets it against the new one and clears the inaccurate percentage reading that appears immediately after a swap.
Why the Galaxy View shuts down at 15–25% remaining after a battery swap
The Galaxy View uses a voltage-based fuel gauge that maps remaining capacity to cell voltage. When a new cell is installed, that voltage curve does not match the calibration data stored from the old battery. Under the combined load of the 18.4-inch display and active Wi-Fi, the cell voltage drops steeply at lower states of charge. The firmware reads that dip as critically low voltage and triggers a shutdown before the actual remaining capacity is used. One full discharge-to-shutoff followed by an uninterrupted charge to 100% recalibrates the gauge and stops premature shutdowns.
Fast charging not available after installing a replacement battery
The Galaxy View's charge controller uses a handshake with the battery's BMS to verify cell parameters before enabling the higher charge rate. On the first cycle with a new cell, the controller runs a conservative trickle profile until it confirms stable voltage response. This is normal behaviour — it is not a defective battery or a charger fault. Use the original Samsung charger and allow the first charge to complete fully; the fast charge profile becomes available from the second cycle onward.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Samsung
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Galaxy View shows 100% for ages then drops to 40% in minutes — is the new battery faulty?
The battery is not faulty. The fuel gauge IC on the Galaxy View was calibrated to the resistance and voltage curve of the original cell, and those values differ on a new one. The percentage reading drifts badly until the gauge relearns the new cell. Run one full discharge to automatic shutoff, then charge uninterrupted to 100% — after that single cycle the percentage display tracks accurately.
The Galaxy View feels warm near the charging port during the first few charges after a battery swap — is that normal?
Yes. The charge IC runs a conditioning profile on a new cell during the first one to three cycles, which produces slightly more heat than steady-state charging on a broken-in battery. Surface temperature at the back panel should stay below 40°C. If it becomes hot to the touch or the tablet throttles display brightness unprompted, check that the replacement battery connector is fully seated — a partial connection forces the charge IC to work harder.
The Galaxy View powers off immediately when unplugged even though the percentage reads above 30% — what's happening?
This happens when the fuel gauge reports a percentage based on stale calibration data while the actual cell voltage under load has already crossed the shutdown threshold. The large display and Wi-Fi radio together draw enough current to cause a sharp voltage sag on an uncalibrated cell. Plug back in, let it charge to 100%, then perform one full uninterrupted discharge to automatic shutoff. Check that the resting cell voltage reads at least 10.8V before unplugging — below that, repeat the calibration cycle.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





