Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

GH28 Haier TAB-T322 Plus Replacement Battery 14.8V 2600mAh

Up to 20% off
New arrival
Sale priceFrom $27.99 USD Regular price $34.99
Shipping calculated at checkout.
Fits Haier TAB-T322 Plus, TAB-JD330WS, TAB-T331, TAB-T520 and compatible models; replaces OEM battery part number GH28.
14.8V and 2600mAh capacity deliver 38.48Wh to sustain motor torque on carpet and hard floors without voltage sag.
Connector slides straight onto dock contacts with locking tab that clicks once fully seated; no tools required.
We bench-tested this cell on a TAB-T322 Plus at full motor load — BMS held steady throughout discharge, no early cutoff observed.
Do not leave the vacuum on the charging dock continuously after reaching full charge; trickle-charge damage will reduce capacity significantly over weeks.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

14.8V

Amp

2600mAh

Haier TAB-T322 Plus / TAB-T331 Series — 14.8V Li-ion Replacement Battery (GH28)

This is a 14.8V, 2600mAh (38.48Wh) lithium-ion battery pack for the Haier TAB-T322 Plus cordless stick vacuum and compatible models including the TAB-JD330WS, TAB-T331, and TAB-T520. It replaces OEM part number GH28. When the original cell degrades after repeated charge cycles and suction noticeably weakens before the indicator hits low, this is the direct swap.

  • TAB-T322 Plus / TAB-T331 platform fit: These models share the same 14.8V nominal voltage rail, GH28 connector format, and BMS handshake protocol. Swapping between them works because the motor controller expects the same charge threshold and communication signal from the pack.
  • Bench tested on actual hardware: We ran this pack through full charge-discharge cycles on the TAB-T322 Plus motor assembly. The BMS held cutoff correctly at low-cell voltage, and the pack delivered consistent voltage under brushhead load without tripping overcurrent protection.
  • Dock charging habit on stick vacs: Do not leave the vacuum sitting on the charging dock continuously. Haier stick vacs on permanent dock connection accumulate trickle charge stress faster than almost any other cordless tool category. Charge to full, remove from the dock, and reconnect only when the pack is depleted.

Suction dropping before the battery indicator reaches low

This happens when one or more cells in the pack age unevenly — the indicator reads average pack voltage while one cell sags under motor load. The motor controller sees a voltage dip and reduces power before the display shows a low-battery warning. A new GH28 pack with balanced cells eliminates this early sag. After fitting the replacement, run one full discharge cycle before judging suction performance.

Motor cutting out mid-clean then recovering after a few seconds

This is a BMS overcurrent trip, not a battery capacity problem. When the filter is partially blocked, the motor draws more current than the rated load to maintain airflow — the BMS reads this as a fault and interrupts the circuit. The pack recovers once current drops back below threshold. Clean or replace the filter first; if the cutout continues with a clean filter, check that cell voltage at rest reads above 15.8V after a full charge.

Compatible Models

TAB-T322 Plus TAB-JD330WS TAB-T331 TAB-T520 TAB-T550 TAB-J3000B Plus QT330 BT350G T322 JD330 T331 T520 T550 SWR-T520 TAB-T525 M366 Plus M367 Plus TAB-T335 TAB-QT330 TAB-QT330B J3000S HB-X510R HB-X310G TAB-JD3F0S

Replaces Part Numbers

GH28

Technical Specifications

Voltage14.8V
Amp Hours2600mAh
Capacity2600mAh
Rate38.48Wh
Net Weight183.2g /6.46 oz
Gross Weight253.2g /8.93 oz
Approximate Weight253.2g /8.93 oz
Dimension 66.60 x 50.00 x 37.36mm

Product Highlights

  • Brand: Haier
  • Manufacturer: CS
  • Series: Standard
  • Color: Blue
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Haier TAB-T322 Plus loses suction halfway through a clean but the battery indicator still shows plenty of charge — is the new battery going to fix this?

Yes, in most cases. Aged cells sag under motor load even when resting voltage looks normal, so the indicator stays green while actual power to the brushhead drops. A fresh GH28 pack with balanced cells removes that mid-clean voltage sag. Run one full charge-discharge cycle after fitting it before drawing conclusions.

The vacuum motor keeps cutting out for a few seconds then comes back on — I've already replaced the battery but it's still doing it.

That cut-and-recover pattern is a BMS overcurrent trip caused by restricted airflow, not a faulty pack. A partially blocked filter forces the motor to draw more current than normal to maintain suction, and the BMS interrupts the circuit to protect the cells. Remove and clean the filter thoroughly — or replace it if it's older than six months. If cutouts stop after that, the pack is fine.

The replacement battery isn't holding as much charge as it did when I first fitted it — it's only been a few weeks.

Early capacity fade almost always comes from continuous dock charging. Haier stick vacs left on the dock between every use accumulate trickle charge stress quickly, compressing usable cell capacity within weeks. Charge the pack to full, remove it from the dock, and only reconnect when it's fully depleted. After two to three properly managed cycles, check whether full-charge suction duration has stabilised.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.