Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

Philips FC6162 Replacement Battery 12V 1500mAh Ni-MH

Up to 19% off
New arrival
From $78.99 USD $97.99
Shipping calculated at checkout.
Fits Philips FC6162 and FC6162/02 handheld vacuums; replaces OEM part 69-2008-009-202.
12V 1500mAh Ni-MH cell delivers 18Wh output; adequate power for motor operation across bare floors and low-pile carpet without sag under normal suction load.
Connector slides straight into the battery slot with flat contact alignment; locking tab seats flush when fully inserted into the dock.
We bench-tested the cell on a FC6162 motor draw bench — BMS accepted dock current without fault codes, and motor voltage held steady under standard suction resistance.
Do not leave this vacuum on the charging dock permanently between uses — continuous trickle charging degrades Ni-MH capacity faster than charge-to-full and removal cycles.
Delivery time

This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Please Confirm Delivery Timeline

Fresh Battery, Worth the Wait

To provide the highest-quality replacement battery, we ship this battery directly from the manufacturer rather than from aging warehouse inventory. This means delivery may take a little longer, but it helps ensure you receive a fresh battery with better performance, a longer lifespan, and greater reliability.

Estimated delivery: 7–10 business days
4.8
★★★★★
★★★★★
Average Customer Rating
By continuing with your purchase, you acknowledge and agree to the estimated 7–10 business day delivery timeframe.
Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

12V

Amp

1500mAh

Philips FC6162 Series — 12V Ni-MH Replacement Battery (69-2008-009-202)

This is a 12V 1500mAh Ni-MH replacement battery for the Philips FC6162 and FC6162/02 cordless handheld vacuum cleaner. It replaces OEM part number 69-2008-009-202. The cell pack matches the original voltage, connector, and physical dimensions of the factory battery.

  • FC6162 and FC6162/02 compatibility: Both variants run the same 12V motor rail with the same connector and cell housing. The BMS expects a Ni-MH cell pack at this voltage — swapping in a different chemistry or voltage causes the charger to reject the pack entirely.
  • Bench tested on actual hardware: We cycled this pack through full charge and load discharge on a test rig matching the FC6162 motor draw. The BMS completed charge termination correctly and held voltage above the cutoff threshold under sustained suction load.
  • Dock charging behaviour on the FC6162: Do not leave the vacuum sitting on the charging dock indefinitely. The FC6162 charger applies a trickle current when docked and full — continuous trickle charge accelerates cell degradation in Ni-MH packs. Charge to full, then remove from the dock.

Suction dropping before the battery indicator reaches low

Ni-MH cells under sustained motor load can sag in voltage before the battery gauge registers a problem. On the FC6162, a partially blocked filter forces the motor to draw more current to maintain airflow — this amplifies voltage sag and causes the motor to slow down visibly. The battery itself may still have capacity remaining, but sustained overcurrent pulls the pack below the motor's effective operating voltage. Clear the filter first; if suction recovers immediately, the cell pack is not the fault.

Motor cutting out mid-use and recovering after a short pause

This is a BMS overcurrent trip, not a dead battery. When the FC6162 motor encounters a blockage or heavily restricted airflow, current draw spikes past the BMS threshold and the pack shuts the circuit. After a short rest the BMS resets and the vacuum powers on again. Clearing the filter and checking the nozzle for blockages resolves most cases — if the motor trips immediately on a clean filter, the cell pack has degraded and can no longer deliver the required burst current. Replace the pack if trips continue after cleaning.

Compatible Models

FC6162 FC6162/02

Replaces Part Numbers

69-2008-009-202

Technical Specifications

Voltage12V
Amp Hours1500mAh
Capacity1500mAh
Rate18Wh
Net Weight305.2g /10.77 oz
Gross Weight495.2g /17.47 oz
Approximate Weight495.2g /17.47 oz
Dimension 166.35 x 52.80 x 62.40mm

Product Highlights

  • Brand: Philips
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My FC6162 loses suction halfway through cleaning but the battery light still shows full — what's happening?

This is voltage sag under motor load, not a dead charge. The Ni-MH pack can still hold energy but drops below the motor's effective operating voltage when the filter restricts airflow and forces higher current draw. Clean the filter first — if suction returns to normal immediately, the filter was the cause. If the problem persists on a clean filter, the cell pack has degraded and can no longer sustain the required voltage under load.

The FC6162 cuts out suddenly while running and turns back on a minute later — is the battery faulty?

That behaviour is a BMS overcurrent trip, not a battery failure by default. A blockage in the nozzle or a clogged filter causes the motor to spike well past its rated current draw, which triggers the BMS to cut the circuit. After the pack cools briefly, the BMS resets and the vacuum runs again. Check the filter and nozzle for any obstruction first; if the cutout happens on a fully clear vacuum, the cell pack can no longer deliver adequate burst current and needs replacing.

The new replacement battery on my FC6162 fades noticeably faster than the original did when it was new — what causes that?

Continuous dock charging is the most common cause of accelerated capacity fade in Ni-MH packs. The FC6162 charger continues to push trickle current into a full pack while docked — over weeks this degrades cell capacity faster than normal charge cycles would. Charge the new pack fully and remove it from the dock rather than leaving it connected permanently. Following this pattern from the start preserves cell capacity significantly longer than dock-charging continuously.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

Philips FC6162 Replacement Battery, 12V, 1500mAh, Ni-MH 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections