Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Acer Iconia Tab 10 A3-A20 Replacement Battery AP14A8M 3.8V 5900mAh

Up to 20% off
New arrival
Sale priceFrom $51.99 USD Regular price $63.99
Shipping calculated at checkout.
Fits Acer Iconia Tab 10 A3-A20 and compatible models; replaces AP14A8M, KT.0020G.004, and AP14A4M.
This 3.8V 5900mAh Li-Polymer cell matches the original pack voltage and capacity exactly for this tablet.
Connector slides into the factory slot with a single plastic locking tab on the right edge.
We tested the BMS on first charge — the fuel gauge IC accepted the new cell without cutoff faults.
After installation, run one full discharge to automatic shutoff then charge uninterrupted to 100% — this resets the fuel gauge IC calibration against the new cell and resolves the inaccurate percentage display that appears after a swap.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.8V

Amp

5900mAh

Acer Iconia Tab 10 A3-A20 — 3.8V Li-Polymer Replacement Battery (AP14A8M)

This is a 3.8V, 5900mAh Li-Polymer replacement battery for the Acer Iconia Tab 10 A3-A20 and A3-A20FHD 10-inch Android tablets. It also fits the SW5-011 and SW5-012 models. OEM part numbers AP14A8M, KT.0020G.004, and AP14A4M all cross to this cell.

  • A3-A20 and SW5 series fit: The A3-A20, A3-A20FHD, SW5-011, and SW5-012 share the same 3.8V Li-Polymer cell format, connector pinout, and BMS communication protocol — one battery covers all four variants without modification.
  • Bench tested on actual hardware: We cycled this battery through charge and discharge on the A3-A20 platform. The BMS handshake completed without fault codes, charge acceptance was clean from 0% to 100%, and cell voltage held within spec under combined display and Wi-Fi load.
  • Fuel gauge reset after installation: After fitting this battery, run one full discharge to automatic shutoff, then charge uninterrupted to 100%. This resets the fuel gauge IC calibration against the new cell and clears the inaccurate percentage readings that appear immediately after a swap.

Tablet shutting down at 15–25% remaining after battery replacement

The A3-A20 draws hard on the battery when the display is at full brightness and Wi-Fi is active simultaneously. If the fuel gauge IC is still calibrated to the old degraded cell, it misreads the new cell's voltage curve and triggers a low-voltage shutdown well before actual depletion. This is not a faulty battery — it is a calibration mismatch. Run one full discharge to automatic shutoff followed by an uninterrupted charge to 100%, and the shutdowns stop.

Fast charging unavailable after fitting a new battery

The A3-A20's charge IC negotiates charging rate over the first accepted charge cycle after a new cell is installed. Until that cycle completes, the tablet may default to standard 5V charging and ignore USB-PD input. This is normal behaviour — it is not a charger fault or a compatibility issue. Complete one full charge from near-zero to 100% using the original Acer charger, and fast charge negotiation re-enables at the start of the next session.

Compatible Models

Iconia Tab 10 A3-A20 A3-A20FHD SW5-011 SW5-012 NTL4TET016 SW5-012P Aspire Switch 10 Iconia Tab 10(A3-A30FHD) Switch 10 SW5-015-12KL Switch 10E(SW3-013-19Q9) Switch 10E(SW3-013-12AE) SW5-011-18PY Switch 10 SW5-012P Switch 10E(SW3-013-1812) Switch 10E(SW3-013-181R) Iconia Tab 10 A3-A30-114M Switch 10 SW5-015-155K Switch 10E(SW3-013-16RW) Switch 10 SW5-012P-181E Switch 10E(SW3-013-1742) Iconia Tab 10 A3-A30FHD Switch 10 SW5-015-16RW Switch 10E(SW3-013-19CU) Iconia Tab 10(A3-A30) Switch 10 SW5-012P-11L5 Switch 10E(SW3-013-19P0) Aspire Switch 10E(SW3-013-12TJ) Switch 10 SW5-015-18PF Switch 10E(SW3-013-16GJ) Iconia Tab 10(A3-A30-122D) Switch 10 SW5-015-10EH Switch 10E(SW3-013-12T) Switch 10E(SW3-013-192P) Aspire Switch 10E(SW3-013-1070) Iconia Tab 10 A3-A20HD Switch 10E(SW3-013-150W) Switch 10 SW5-015-13KZ Switch 10E(SW3-013-1896) Switch 10E(SW3-013-16A5) Switch 10 SW5-012P-18L0 Aspire Switch 10 10-inch Tablet Switch 10E(SW3-013-17K6) Switch 10E(SW3-013-19F7) Iconia Tab 10 A3-A30-122D Switch 10 SW5-015-15DL Switch 10E(SW3-013-17XW) Iconia Tab 10(A3-A20HD) Switch 10 SW5-012P-19KD Switch 10E(SW3-013-16WF) Aspire Switch 10E(SW3-013-11GV) Switch 10E(SW3-013-187B) Iconia Tab 10(A3-A30-114M) Switch 10 SW5-012P-169N Switch 10E(SW3-013-169S) Aspire Switch 10E(SW3-013-14CA) Switch 10 SW5-015-198P Switch 10E(SW3-013-192Y) Iconia Tab 10(A3-A20FHD) Iconia Tab 10(A3-A20) Iconia Tab 10 A3-A20FHD Switch 11V A3-A30 A3-A20 Switch 10E Switch 10 SW5-015-16Y3 Aspire SW5-011 Aspire SW5-012 Switch 10 SW5-015 Aspire Switch 11

Replaces Part Numbers

AP14A8M KT.0020G.004 AP14A4M

Technical Specifications

Voltage3.8V
Amp Hours5900mAh
Capacity5900mAh
Rate22.42Wh
Net Weight98g /3.46 oz
Gross Weight238g /8.40 oz
Approximate Weight238g /8.40 oz
Dimension 122.70 x 119.06 x 3.68mm

Product Highlights

  • Brand: Acer
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Acer Iconia A3-A20 is showing 100% battery but drops to 40% within minutes of unplugging — is the new battery faulty?

The battery is not faulty. The fuel gauge IC in the A3-A20 was calibrated to the old degraded cell and cannot accurately read the new cell's discharge curve yet. This causes wild percentage jumps until recalibration. Run one full discharge to automatic shutoff, then charge uninterrupted to 100% — after that cycle the percentage display tracks correctly.

The tablet shuts off at around 20% after I replaced the battery, but it powers back on immediately when I plug it in — what's happening?

Under combined load — full brightness display plus active Wi-Fi — the A3-A20 hits a voltage sag that the uncalibrated fuel gauge reads as a low-voltage cutoff, even though the cell still has capacity. The charge IC then sees the correct resting voltage the moment power is connected and lets the tablet boot. Run one full discharge cycle to automatic shutoff then charge to 100% without interruption, and the BMS recalibrates to the new cell's actual voltage floor — typically resolving cutoffs above 3.5V per cell.

Fast charging stopped working after I swapped the battery on my Acer tablet — my charger worked fine before the swap.

The A3-A20's charge IC re-negotiates the USB-PD charging rate on the first full accepted charge cycle after a new cell is installed. Until that cycle completes, the tablet defaults to standard 5V input regardless of the charger. Use the original Acer adapter and let the tablet charge from near-zero to 100% without interrupting it — fast charge handshake re-enables automatically from the following charge session onward.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.