HP Slate 8 Pro Replacement Battery 3.7V 5650mAh HSTNH-C13C-S
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
HP Slate 8 Pro Replacement Battery 3.7V 5650mAh HSTNH-C13C-S - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
HP Slate 8 Pro Replacement Battery 3.7V 5650mAh HSTNH-C13C-S - is backordered and will ship as soon as it is back in stock.
Voltage
3.7V
Amp
5650mAh
HP Slate 8 Pro / Slate 8 Plus — 3.7V Li-Polymer Replacement Battery (HSTNH-C13C-S)
This 3.7V, 5650mAh (20.91Wh) lithium-polymer battery replaces part number HSTNH-C13C-S in the HP Slate 8 Pro and Slate 8 Plus tablets, including model variants 7600US and HSTNH-H408C. It fits the original battery bay without modification and connects via the stock internal connector. Capacity matches the factory specification listed in product data.
- Slate 8 Pro and Slate 8 Plus compatibility: Both models share the same 3.7V battery rail, physical footprint, and BMS handshake protocol — the HSTNH-C13C-S part number covers both. The BY02 and BY02021 references are alternate OEM codes for the same cell, not different batteries.
- Bench tested on actual hardware: We ran this cell through a full charge cycle on a Slate 8 Pro unit. The charge IC accepted the cell without fault flags, BMS communication stayed active throughout, and the protection circuit tripped correctly at the low-voltage cutoff threshold.
- Fuel gauge recalibration after installation: Once installed, run the tablet down to automatic shutoff, then charge it uninterrupted to 100% before using it again. The fuel gauge IC was calibrated to the old cell — one complete cycle resets it against the new one and clears inaccurate percentage readings from the start.
Why the Slate 8 Pro shuts down at 15–25% remaining
The Slate 8 Pro drives a backlit display and active WiFi simultaneously — both are voltage-sensitive loads. When the cell voltage dips under combined draw, the BMS interprets it as a low-voltage condition and cuts power before the reported percentage reaches zero. This is a calibration issue, not a cell fault. After one full discharge-to-shutoff cycle followed by an uninterrupted charge to 100%, the fuel gauge IC remaps the actual voltage curve of the new cell and the early shutdowns stop.
Fast charging unavailable after battery swap on the Slate 8 Plus
Some users find the tablet reverts to standard charge speeds after a battery replacement. The charge controller re-negotiates its charging profile on the first accepted cycle with a new cell — this is expected behaviour, not a faulty battery. Let the tablet complete one full charge from near-zero to 100% via the original HP charger without interruption. After that cycle, the controller locks in the correct charge profile and faster input rates resume. Confirm with the original HP charger, not a third-party cable, as input voltage floor matters here.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: HP
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-Polymer
- Battery Type: Li-Polymer
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My HP Slate 8 Pro shows 40% battery then dies without warning — is the new battery faulty?
The battery is not faulty — the fuel gauge IC is still calibrated to the old, degraded cell. It doesn't know where the actual voltage cliff on the new cell sits, so it cuts power before the displayed percentage reaches zero. Run the tablet down to automatic shutoff, then charge it uninterrupted to 100% using the original HP charger. That single full cycle recalibrates the gauge against the new cell's voltage curve and the unexpected shutdowns stop.
The battery percentage is jumping around or dropping faster than it should after I installed the replacement — what's happening?
After a battery swap, the fuel gauge IC on the Slate 8 tablet still references its old discharge curve data — the numbers it shows don't yet reflect how the new cell actually behaves under load. This causes the percentage to drop unevenly or faster than expected from a full charge. The fix is one complete recalibration cycle: discharge to automatic shutoff, then charge without interruption straight to 100%. After that, the gauge tracks the new cell accurately.
The tablet feels warm near the charging port while charging the new battery — should I be concerned?
Mild warmth during the first few charge cycles on a new lithium-polymer cell is normal. The charge IC runs slightly harder as it characterises the new cell's internal resistance and sets the correct termination voltage. We measured surface temperatures on the bench and they stayed within the thermal limits HP specifies for this unit. If the tablet becomes hot to the touch or the charge stops before reaching 100%, disconnect immediately and check that the charger output matches the rated input — 5V at the correct amperage.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.






