Asus F301 Replacement Battery A31-X401 10.8V 4400mAh
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Asus F301 Replacement Battery A31-X401 10.8V 4400mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Asus F301 Replacement Battery A31-X401 10.8V 4400mAh - is backordered and will ship as soon as it is back in stock.
Voltage
10.8V
Amp
4400mAh
Asus F301 / X401 Series — 10.8V Li-ion Replacement Battery (A31-X401)
This is a 10.8V, 4400mAh (47.52Wh) Li-ion battery for the Asus F301, F301A, F301A1, F301U, and over 100 additional X401-series notebook models. It replaces OEM part numbers A31-X401, A32-X401, A41-X401, A42-X401, and 0B110-00140100E among others. When the original cell no longer holds a charge or the laptop loses power unplugged, this cell restores mobile operation.
- X401-series platform compatibility: The F301, X401A, X401U, and related variants all share the same battery bay geometry, three-cell connector pinout, and BMS handshake protocol — which is why one cell serves the entire lineup without modification.
- Bench tested on actual hardware: We ran this cell in an F301A and confirmed the BMS initialised correctly on first insertion, the charge IC accepted a full charge cycle without fault codes, and the fuel gauge IC tracked state-of-charge without dropping out.
- First-cycle recalibration on the F301: After installing, run one full discharge to hibernate-cutoff, then charge uninterrupted to 100%. This forces the BIOS battery learn cycle to reset against the new cell's actual capacity and clears the inaccurate health warning that appears after every cell swap.
BIOS reporting poor battery health immediately after fitting a new cell
The Asus X401-series BIOS reads cycle count, rated Wh, and health status from EEPROM data stored on the battery's BMS board — not from live voltage measurements. When a new cell arrives, its EEPROM values are blank or set to factory defaults, which the BIOS interprets as an unknown or degraded pack. Running a full discharge-to-hibernate followed by an uninterrupted charge to 100% allows the BIOS learn cycle to write fresh calibration data to the fuel gauge IC. After one or two completed cycles, the health status normalises. No firmware update or driver action is needed.
Laptop shuts down at 20–30% charge shown on the F301
This symptom points to a voltage cliff — the cell voltage under combined CPU and display load drops below the BMS cutoff threshold before the fuel gauge reads zero. It usually means the fuel gauge IC has not yet calibrated its empty-point against the new cell chemistry. The fix is the same learn cycle: discharge fully to the point Windows triggers hibernate, then charge to 100% without interruption. After two full cycles the empty-point resets and the laptop will no longer cut out early; shutdown should occur below 5% indicated.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Asus
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The Asus F301 is showing the battery as "0% available (plugged in, charging)" but the charge light is on — what's happening?
The fuel gauge IC on the new cell hasn't synchronised with the BIOS yet, so the OS is reading stale EEPROM data and displaying 0% even while current is flowing into the cell. Let it charge completely without interrupting the session — do not restart mid-charge. Once it hits 100% and you complete a full discharge-to-hibernate, the BIOS learn cycle writes correct baseline data and the percentage readout corrects itself.
System information shows the battery's Wh rating as lower than the 47.52Wh spec — is the cell faulty?
It's not a fault — it's an EEPROM mismatch. The figure Windows reports comes from the rated Wh value stored on the battery's BMS board, which may differ from the cell's actual measured capacity until the learn cycle runs. Run one full discharge to hibernate-cutoff followed by a complete uninterrupted charge to 100%. After that cycle the fuel gauge IC recalculates and the reported Wh value aligns with the actual 47.52Wh specification.
The F301 charges to exactly 80% then stops — is the charge limit firmware getting in the way?
Yes. Asus Battery Health Charging, if enabled in MyASUS or the AI Suite software, caps charge at 80% by design to reduce cell stress over long-term plugged-in use. Open MyASUS, go to Battery Health Charging, and switch the mode from "Balanced" or "Maximum Lifespan" to "Maximum Capacity." The charge limit lifts immediately and the cell will charge to 100% on the next cycle — this is a BIOS-controlled firmware setting, not a defect with the replacement cell.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





