Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

BLU Studio Selfie C755005200L Replacement Battery 3.7V 1500mAh

Up to 21% off
New arrival
Sale priceFrom $23.99 USD Regular price $29.99
Shipping calculated at checkout.
Fits BLU Studio Selfie and S070Q models; replaces OEM part C755005200L.
3.7V and 1500mAh capacity restores full charge cycles on this smartphone after the original cell degrades or fails.
Connector seats flush into the battery slot with the positive terminal facing the device contact plate; no locking tab.
We ran full discharge-charge cycles on a bench charger; the BMS accepted input current without fault codes and held voltage stable under load.
On first use after installation, run one complete discharge-charge cycle with standard charging only — this lets the fuel gauge IC recalibrate to the new cell curve before the phone resumes fast charging.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1500mAh

BLU Studio Selfie / S070Q — 3.7V Li-ion Replacement Battery (C755005200L)

This is a 3.7V, 1500mAh Li-ion cell that replaces the original battery in the BLU Studio Selfie and S070Q smartphones. It fits the existing battery bay without modification and connects via the stock flex connector. Capacity is rated at 5.55Wh — matching the factory cell spec.

  • Studio Selfie and S070Q compatibility: Both the Studio Selfie and S070Q share the same battery bay geometry, connector pinout, and BMS handshake protocol — one cell covers both models. The 75.00 × 50.00 × 4.30mm footprint seats flush with no pressure on the mid-frame.
  • Bench tested on actual hardware: We cycled this cell through full charge and load discharge on the S070Q platform. The BMS accepted charge without fault flags, held voltage above 3.5V through mid-discharge, and the protection circuit tripped cleanly at the low-voltage cutoff threshold.
  • Fuel gauge recalibration on first cycle: After installation, run one complete discharge to auto-shutoff followed by a full uninterrupted charge before normal use. The BLU fuel gauge IC is calibrated to the original cell's discharge curve — one full cycle rewrites the reference and stops erratic percentage readings from the first day.

Why the Studio Selfie reports wrong battery percentage after a cell swap

The fuel gauge IC on the S070Q uses a coulomb counter referenced against the original cell's internal resistance and discharge curve. When a new cell goes in, that reference is stale. The IC can read 40% while the actual cell voltage is already near the low-voltage cutoff. This mismatch causes sudden shutdowns at percentages that look safe. One full discharge-to-shutoff cycle followed by a complete charge resets the coulomb counter baseline and aligns reported percentage with real cell state.

Sudden shutdown at 20–30% on the replacement cell

This happens when the modem or display draws a short current spike and the cell voltage sags below the BMS cutoff threshold — even though the gauge still shows charge remaining. A fresh Li-ion cell with an uncalibrated fuel gauge IC is especially prone to this in the first few cycles. The fix is not a hardware fault — run the phone through two full discharge and charge cycles without interruption. After calibration, the gauge tracks real voltage more accurately and the shutdowns stop.

Compatible Models

Studio Selfie S070Q

Replaces Part Numbers

C755005200L

Technical Specifications

Voltage3.7V
Amp Hours1500mAh
Capacity1500mAh
Rate5.55Wh
Net Weight32g /1.13 oz
Gross Weight57g /2.01 oz
Approximate Weight57g /2.01 oz
Dimension 75.00 x 50.00 x 4.30mm

Product Highlights

  • Brand: BLU
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The BLU Studio Selfie won't turn on at all after the new battery sat in a drawer for a few months — is the battery dead?

Most likely the cell discharged below 2.5V in storage and the BMS locked out to prevent damage. Connect the phone to a wall charger — not a USB port — and leave it for 30–45 minutes without pressing the power button. The charge IC needs to trickle current into the cell before the BMS will allow normal charging to resume. If the battery icon appears at any point, the cell is recovering; continue charging to at least 3.6V before booting the phone.

The phone feels noticeably warm near the battery compartment during the first few charges — is that normal with a new cell?

A new Li-ion cell has slightly higher internal impedance than a broken-in one, so the charge IC pushes a little more voltage to drive current in — that converts to heat. It is more pronounced in the first two to three charge cycles and fades as the cell conditions. If the back stays warm throughout a full charge and does not cool down after charging ends, check that no third-party charger is exceeding 5V input, as the Studio Selfie charge IC does not regulate against overvoltage on the input rail.

Battery percentage is jumping around — shows 60%, then drops to 35%, then jumps back up without the phone being used much — what is causing this?

The coulomb counter in the BLU fuel gauge IC is still referencing the old cell's discharge curve after the swap. It loses track of state-of-charge when the new cell's voltage response does not match the stored model. Run the phone down to automatic shutoff, then charge to 100% in a single uninterrupted session. That single full cycle gives the IC enough data to rebuild its internal model against the new cell, and erratic jumps typically stop after that recalibration pass.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.