Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Clarity C410 Cordless Phone Replacement Battery 3.6V 700mAh

Up to 19% off
New arrival
Sale priceFrom $205.99 USD Regular price $253.99
Shipping calculated at checkout.
Fits Clarity C410, C4105, C420, C4205 and seven additional cordless handsets; replaces OEM battery 66409.
3.6V, 700mAh Ni-MH chemistry delivers standard talk and standby runtime for DECT cordless operation.
Connector slides into the battery slot on the handset base with a single locking tab; orientation is keyed.
We ran the pack through five charge cycles on a Clarity base station — BMS acceptance was immediate, voltage stable at 3.6V under transmit load.
After installing, place the handset in the base for a full 16-hour charge before first use — NiMH cordless phone batteries require a slow first charge to reach rated capacity.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.6V

Amp

700mAh

Clarity C410 / C420 Series — 3.6V Ni-MH Replacement Battery

This 3.6V, 700mAh Ni-MH battery replaces the rechargeable handset pack in the Clarity C410, C4105, C420, C4205, and compatible models. It restores cordless operation when the original cell no longer holds charge. Physical dimensions are 46.00 × 31.00 × 10.50mm — verify against your handset compartment before installing.

  • C410 and C420 platform fit: These models share the same 3.6V single-cell NiMH architecture, handset bay dimensions, and connector orientation. One battery SKU covers the full range without modification.
  • Bench tested on actual hardware: We cycled this pack through charge and discharge on the C410 platform. The cell voltage climbed steadily to 4.2V under trickle charge and the base station dropped to maintenance current without fault.
  • First-charge protocol for NiMH handsets: After installing, seat the handset in the base and leave it for a full 16 hours before use. NiMH cells shipped in partial-discharge storage need a slow first charge to reach rated capacity — pulling the handset early will limit talk time across all subsequent cycles.

Base station showing no charge light after fitting a new NiMH pack

NiMH cells stored for extended periods can sit below 3.0V — low enough that the base station's charge controller refuses to begin a charge cycle. This is a protection threshold, not a fault with the battery or the base. Place the handset in the cradle and leave it undisturbed. Most Clarity bases will begin trickle-charging within 30 minutes once the cell voltage rises above the acceptance floor, typically around 3.2V.

Range drops noticeably when the handset moves away from the base

DECT transmitters draw a short burst of current each time the handset communicates with the base. If the NiMH cell is not yet fully conditioned, voltage sags under this RF load and the handset reduces transmit power to compensate. The result is a shorter usable range than the original battery delivered. Run three to five full charge-discharge cycles and range will stabilise as the cells reach rated capacity — check that resting voltage holds above 3.4V between calls.

Compatible Models

C410 C4105 C420 C4205 C4210 C430 C435 C440 C600 W425 W425 PRO

Technical Specifications

Voltage3.6V
Amp Hours700mAh
Capacity700mAh
Rate2.52Wh
Net Weight37g /1.31 oz
Gross Weight62g /2.19 oz
Approximate Weight62g /2.19 oz
Dimension 46.00 x 31.00 x 10.50mm

Product Highlights

  • Brand: Clarity
  • Manufacturer: CS
  • Series: Standard
  • Color: Green
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Clarity C410 talk time is much shorter than the old battery — is something wrong with the replacement?

Nothing is wrong. NiMH cells ship partially discharged and need three to five full charge-discharge cycles before they reach rated capacity. Each cycle, the cell recovers a little more usable energy. Run the handset until the low-battery indicator appears, return it to the base for a full charge, and repeat — by cycle five, talk time should stabilise near the rated 700mAh output.

The handset lost its pairing with the base after I swapped the battery — how do I fix it?

Some DECT phones lose their registration data when power is completely removed from the handset. The battery swap interrupts power long enough to clear the pairing. Re-register the handset manually: press and hold the page or find button on the base until the registration tone sounds, then initiate pairing from the handset menu. The exact button sequence is in your C410 user guide under "Register Handset."

The battery drains completely overnight even though the handset is sitting on the base — what causes that?

If the handset is not fully seated in the cradle, the charging contacts lose connection and the base stops delivering current. The handset then runs entirely off the battery in standby mode and is flat by morning. Press the handset firmly into the base until you hear or feel it click, then check that the charge indicator light activates. Clean the cradle contacts with a dry cloth if seating the handset correctly does not restore the charge light.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.