Dell Latitude D620 11.1V Replacement Battery 451-10297
This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Dell Latitude D620 11.1V Replacement Battery 451-10297 - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Dell Latitude D620 11.1V Replacement Battery 451-10297 - is backordered and will ship as soon as it is back in stock.
Voltage
11.1V
Amp
4400mAh
Dell Latitude D620 / D630 — 11.1V Li-ion Replacement Battery (451-10297)
This is an 11.1V, 4400mAh (48.84Wh) Li-ion battery for the Dell Latitude D620, D630, D630 ATG, and Precision M2300. It replaces the original cell pack when capacity has dropped and the laptop no longer holds a useful charge away from the mains. Physical dimensions are 185.10 × 66.45 × 19.10mm — same form factor as the factory unit.
- D620 / D630 / M2300 platform fit: These three models share the same battery bay dimensions, 11.1V three-cell-series architecture, and SMBus connector pinout. The BMS handshake uses the same EEPROM protocol across the platform, so one cell pack covers the whole range without modification.
- Bench tested on actual hardware: We cycled this pack on a D630 through full charge-discharge sequences. The BMS reported state-of-charge correctly after two calibration cycles, and the protection circuit tripped cleanly at low-voltage cutoff without triggering a hard fault on the SMBus.
- Post-install discharge cycle on Dell Latitude: After fitting this battery, run one full discharge until the laptop hibernates, then charge uninterrupted to 100% without using the machine. This forces the BIOS battery learn cycle to reset against the new cell chemistry and clears the inaccurate health warning that appears after every cell swap.
BIOS reporting poor battery health immediately after fitting a new cell
The Latitude D620 and D630 store battery health data in EEPROM on the battery's BMS board. When a new pack is installed, the BIOS reads the fresh EEPROM and flags a mismatch against the historical charge data it cached from the old cell. This triggers a "Battery health is poor" or "Consider replacing your battery" warning even on a brand-new pack. Running one full discharge-to-hibernate followed by an uninterrupted charge to 100% completes the BIOS learn cycle and clears the warning. If the warning persists after two full cycles, check that the SMBus contacts on the battery bay are clean and making solid contact.
Laptop shuts down at 20–30% charge shown on screen
This happens when the fuel gauge IC has not yet calibrated against the new cell's actual discharge curve. The gauge IC maps voltage to percentage using data built up over charge cycles — with a new cell, early readings are extrapolated from the old cell's profile, so the displayed percentage diverges from real capacity under CPU and display load. As the system draws peak current during active use, the cell voltage drops faster than the uncalibrated gauge predicts, and the BIOS triggers an emergency shutdown before the display reaches 0%. Run two complete discharge-to-hibernate and full-charge cycles without interruption to let the fuel gauge IC build an accurate voltage-to-capacity map. After calibration, the shutdown threshold should stabilise at the correct low-voltage cutoff near 9.0V aggregate pack voltage.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Dell
- Manufacturer: CS
- Series: Standard
- Color: Metallic grey
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
Dell BIOS shows battery as "Unknown" or 0% right after I put the new battery in — is something wrong with the cell?
Nothing is wrong with the cell. The Latitude D620/D630 BIOS reads EEPROM data stored on the battery's BMS board to identify the pack, and a new cell ships with blank or factory-default EEPROM values the BIOS doesn't recognise yet. Power on with the new pack installed, let the system boot fully, then run one complete discharge to hibernate followed by an uninterrupted charge to 100%. After that cycle the BIOS will have written its own health baseline to EEPROM and the "Unknown" or 0% reading will clear.
System info shows the wrong Wh rating for this battery — it's reporting a different number than what's on the label.
The Wh figure shown in Dell's battery status tools is pulled from the EEPROM "design capacity" field on the BMS, which is set at the factory and reflects the rated cell chemistry, not the measured capacity of your specific pack. A replacement cell from a different production run can carry a slightly different design-capacity entry in that field even when the actual deliverable energy is within spec. The discrepancy is an EEPROM metadata difference, not a capacity fault. Cross-check the actual capacity by running a full discharge cycle and monitoring drain in Windows Battery Report — the "last full charge" figure after one calibration cycle is the accurate number to use.
Charge stops at 80% and the laptop won't charge beyond that no matter how long it stays plugged in.
The D620 and D630 BIOS includes a charge-limit feature that caps charging at 80% when battery health mode or certain power management settings are active in Dell's ControlPoint or the BIOS power page. This is firmware behaviour, not a fault in the replacement cell. Go into BIOS setup (F2 at POST), navigate to Power Management, and confirm "Battery Charge Mode" is set to "Standard" rather than "Express Charge" or any custom threshold mode. Save and reboot — charging will resume to 100% from the next cycle.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





