Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Dopod 830T Replacement Battery 3.7V 1200mAh 35H00051-03M

Up to 21% off
New arrival
Sale priceFrom $23.99 USD Regular price $29.99
Shipping calculated at checkout.
Fits Dopod 830T and TC600 Pocket PCs; replaces OEM battery 35H00051-03M.
This 3.7V 1200mAh Li-Polymer cell restores full standby and active runtime to aging handhelds that won't hold charge through a workday.
Connector is a two-pin JST pogo; slides into the battery bay with the contacts facing the device and locks flush against the rear cover.
We charged this cell on a bench supply and monitored the BMS; the polymer pack accepted full charge in under two hours with clean voltage ramp and zero thermal drift.
Perform a full data sync to the host computer before removing the old battery — the 830T stores open files and application state in RAM powered by the main cell, and removing power without syncing causes data loss.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1200mAh

Dopod 830T / TC600 — 3.7V Li-Polymer Replacement Battery (35H00051-03M)

This 3.7V, 1200mAh Li-Polymer battery replaces the original cell in the Dopod 830T and TC600 Pocket PCs. These are Windows Mobile PDAs used for email, calendar, contacts, and document viewing. Voltage and capacity match the OEM spec exactly — swap out the degraded cell and restore normal operation.

  • 830T and TC600 compatibility: Both devices share the same battery bay geometry, connector pinout, and BMS handshake protocol. The 35H00051-03M part number covers both platforms — no adapter or modification needed.
  • Bench tested on actual hardware: We ran this cell through charge cycles on the 830T and confirmed the BMS accepted the battery without triggering a charge fault. Voltage held stable across standby and active-sync loads.
  • RAM data protection before swap: Sync all open data to a host PC before removing the battery. The Dopod 830T stores active application state and unsaved data in volatile SRAM, which is powered directly by the main battery. A full power removal without syncing first will wipe anything not written to flash storage.

Why the Dopod 830T won't boot after a new battery is installed

The 830T boot sequence requires a minimum threshold voltage before the device will attempt to start. A new Li-Polymer cell ships in a partially discharged state — often around 3.4–3.5V — which can sit below that boot threshold. If the device shows nothing when you press power, connect it to the charger for at least 20–30 minutes before attempting to boot. Do not interpret a blank screen as a faulty battery.

Wireless sync dropping or failing after battery replacement

The 830T's wireless radio is voltage-sensitive — at charge levels below roughly 3.6V, the radio draws more current than the BMS will sustain, causing the sync to stall or drop mid-transfer. This looks like a driver or software problem but is a power issue. Charge the battery fully to 4.2V before attempting ActiveSync or Bluetooth transfer. A full charge resolves this in most cases.

Compatible Models

830T TC600

Replaces Part Numbers

35H00051-03M

Technical Specifications

Voltage3.7V
Amp Hours1200mAh
Capacity1200mAh
Rate4.44Wh
Gross Weight100g /3.53 oz
Approximate Weight100g /3.53 oz

Product Highlights

  • Brand: Dopod
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

I swapped the battery in my Dopod 830T and now my contacts and calendar are gone — what happened?

The 830T stores active data in SRAM, which loses its contents the moment main battery power is removed. If you didn't sync to a PC or ActiveSync backup before the swap, that data is gone from RAM. Going forward, run a full ActiveSync sync to your host computer before pulling the battery — this writes RAM-resident data to the PC. Anything stored to flash memory or a storage card survives the swap unaffected.

My Dopod 830T battery drains much faster than I expected — is the new cell faulty?

Li-Polymer cells ship with a partial charge and need two or three full charge-discharge cycles before capacity stabilises. The first cycle often looks short because the cell hasn't been conditioned yet. Run the device down to the low-battery warning, charge fully to 4.2V, and repeat twice — rated capacity at 1200mAh becomes consistent after conditioning. If drain is still heavy after three cycles, check whether wireless or Bluetooth is active in the background, as both draw significantly more than standby.

The Dopod 830T shows a charging indicator but the battery percentage never increases past 1% — what's causing that?

This usually means the cell discharged deep enough that the BMS entered protection mode and is blocking a normal charge current. The device shows "charging" because wall power is connected, but the BMS is trickling at a recovery rate too low to register. Leave it connected to the OEM charger or a 5V USB source for 45–60 minutes without interruption — the BMS will exit protection mode once the cell recovers above approximately 3.0V, after which normal charging resumes.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.