Dual-Lite CV3GEB 4.8V 800mAh Ni-CD Compatible Battery 24D677
This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Dual-Lite CV3GEB 4.8V 800mAh Ni-CD Compatible Battery 24D677 - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Dual-Lite CV3GEB 4.8V 800mAh Ni-CD Compatible Battery 24D677 - is backordered and will ship as soon as it is back in stock.
Voltage
4.8V
Amp
800mAh
Dual-Lite CV3GEB Series — 4.8V Ni-CD Replacement Battery (24D677)
This is a 4.8V, 800mAh Ni-CD replacement battery for Dual-Lite emergency lighting units cross-referencing OEM part number 24D677. It fits the CV3GEB, CV3GEBI, CV3GEW, CV3GEWI, and over 179 additional Dual-Lite emergency light models. The cell pack slots into the fitting's existing battery bay and connects to the onboard charge controller without modification.
- CV3GEB family compatibility: The CV3GEB, CV3GEBI, CV3GEW, and CV3GEWI share the same 4.8V three-cell Ni-CD configuration and the same physical footprint — 50mm × 28.5mm × 28.5mm. The charge controller in these units floats at a fixed voltage calibrated for Ni-CD chemistry, so this cell pack matches both the electrical and mechanical spec without adapter hardware.
- Bench tested on actual hardware: We cycled this pack through a simulated mains-failure test sequence. The BMS accepted charge within the expected float window, and the cells reached nominal voltage before the first full test cycle completed. No voltage excursions or cutoff events occurred during load.
- Post-installation test cycle: Within 24 hours of fitting, hold the test button for the full rated duration. This confirms the new cell accepts load under emergency draw conditions and allows the charge controller to register actual cell capacity before your next scheduled compliance inspection.
Charge indicator staying red after installing the new 24D677 pack
Replacement Ni-CD cells typically ship at a reduced state of charge after storage — often below the float acceptance window the CV3GEB charge controller expects to see. When the controller reads incoming cell voltage as too low, it holds the fault or charging indicator rather than switching to green or steady. Allow 24 hours on mains power before assuming the cell is defective. Most units clear the red indicator once the pack climbs above approximately 4.2V on a 4.8V three-cell string.
Emergency light dims noticeably partway through a duration test
A new pack that dims mid-test has not yet reached full capacity — this is a conditioning issue, not a cell defect. Ni-CD cells fresh from storage often deliver only 60–70% of rated capacity on the first discharge cycle. Run one complete charge-and-full-test cycle before recording the result for compliance purposes. After that initial cycle, capacity typically reaches the rated 800mAh and the fitting sustains full lamp output through the complete test duration.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Dual-Lite
- Manufacturer: CS
- Series: Standard
- Color: White
- Product Type: Ni-CD
- Battery Type: Ni-CD
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The charge LED on my CV3GEB is still red 30 minutes after I put the new battery in — is the cell dead?
No — replacement Ni-CD packs ship partially discharged, often below the voltage threshold the CV3GEB controller uses to confirm a healthy cell. The controller holds the red indicator until the pack charges above roughly 4.2V on the three-cell string. Leave the unit on mains for a full 24 hours and check again before drawing any conclusions about the cell.
My emergency light passed installation but failed the 90-minute duration test a week later — why?
A new Ni-CD pack typically needs one full charge-and-discharge cycle before it reaches rated capacity. On a first test, cells fresh from storage can deliver as little as 60–70% of their 800mAh rating, which cuts the duration short. Run one complete manual test cycle immediately after installation to condition the cells, then schedule your compliance test after that cycle completes.
The fault LED on the fitting won't clear even though I've confirmed the new 24D677 pack is seated and charging correctly — what resets it?
Some Dual-Lite fittings latch a fault LED in firmware and do not clear it automatically when the fault condition resolves. With the unit on mains power and confirmed charging, press and hold the test button for three seconds to trigger a manual reset sequence. If the LED remains after that, cut mains power to the fitting for 60 seconds, restore power, and allow the controller to re-initialise with the new pack voltage present.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





