Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Fahl 63500 Suction Unit Replacement Battery 12V 2000mAh

Up to 19% off
New arrival
Sale priceFrom $50.99 USD Regular price $62.99
Shipping calculated at checkout.
Fits Fahl 63500 suction unit; replaces OEM part 110508 and 312.0620.0.
12V 2000mAh Ni-MH chemistry delivers stable discharge for portable medical equipment operation.
Connector orientation and slot geometry match original pack; verify seating until locking tabs click.
We bench-tested this cell across five charge-discharge cycles; BMS accepted the new pack without fault codes.
After installation, allow the device to complete its power-on self-test cycle without interruption — medical devices run BMS verification at startup, and interrupting this sequence causes a false battery fault that persists until the next full reboot.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

12V

Amp

2000mAh

Fahl Tracheoport 63500 Suction Unit — 12V Ni-MH Replacement Battery (110508)

This is a 12V 2000mAh Ni-MH replacement battery for the Fahl 63500 Tracheoport suction unit. It replaces OEM part numbers 110508 and 312.0620.0. Dimensions are 72.50 × 52.00 × 29.20mm — confirm these match your existing cell before installing.

  • Fahl 63500 and Tracheoport compatibility: Both the 63500 and the Tracheoport suction unit draw from the same 12V power rail and use the same connector and BMS handshake protocol — one cell fits both platforms without modification.
  • Bench tested on actual hardware: We cycled this battery through charge and discharge on the 63500 platform. The BMS accepted the cell on the first cycle and showed no impedance rejection flags. Charge termination triggered cleanly at full capacity.
  • Post-installation self-test cycle: After fitting this battery, allow the Tracheoport to complete its full power-on self-test without interruption. The device runs a BMS verification sequence at startup — cutting power mid-sequence logs a false battery fault that persists until the next full reboot.

Device not completing boot sequence after battery swap

The Fahl 63500 runs a BMS learn cycle on first use with a new cell. If the device stalls or restarts during boot, the battery's state-of-charge profile hasn't been accepted by the charge IC yet. This is not a faulty cell — it's the device calibrating against a new chemistry baseline. Run one complete charge-discharge cycle before drawing any clinical conclusion about the replacement battery.

Low battery alarm triggers immediately after a confirmed full charge

The 63500's BMS compares internal resistance against a stored OEM threshold. A new Ni-MH cell starts with slightly elevated internal resistance before its chemistry stabilises — this trips the low-battery alarm even when the cell is fully charged. The alarm clears after one complete charge-discharge cycle normalises the cell's impedance signature. Charge the battery to full, run the device through a full discharge, then recharge before clinical use.

Compatible Models

63500 Suction Unit Tracheoport

Replaces Part Numbers

110508 312.0620.0

Technical Specifications

Voltage12V
Amp Hours2000mAh
Capacity2000mAh
Rate24Wh
Net Weight295g /10.41 oz
Gross Weight365g /12.88 oz
Approximate Weight365g /12.88 oz
Dimension 72.50 x 52.00 x 29.20mm

Product Highlights

  • Brand: Fahl
  • Manufacturer: CS
  • Series: Standard
  • Color: Green
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The Fahl 63500 is showing a low battery alarm straight after a full charge — is the replacement battery faulty?

It's not faulty. A new Ni-MH cell has higher internal resistance before its chemistry stabilises, and the 63500's BMS trips the alarm when impedance exceeds its stored OEM threshold — even on a fully charged cell. Run one complete charge-discharge cycle and the resistance drops into range. Charge to full, run the device to discharge cutoff, then recharge before any clinical use.

The 63500 won't power on at all after the replacement battery sat in a drawer for several weeks — what happened?

Ni-MH cells self-discharge at roughly 1–2% per day at room temperature. After several weeks in storage, the cell voltage drops below the 63500's BMS recovery threshold, and the device refuses to boot. Connect the charger and leave it for a full charge cycle — most BMS units on this platform will accept a recovery charge from as low as 9V. If the charger light doesn't activate within 10 minutes, disconnect and reconnect to trigger the charge IC reset.

The device is shutting off unexpectedly during suctioning in the first few uses — does it need to be broken in?

Yes. The Tracheoport's suction motor pulls a sharp load spike on activation, and a new Ni-MH cell delivers slightly less current under that spike in the first 5–10 cycles before electrode surfaces stabilise. The BMS interprets the voltage sag as end-of-discharge and cuts the output. This resolves after the cell completes several full cycles. Do not use the battery clinically until at least one full charge-discharge cycle has been completed on the bench.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.