Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Heim & Haus 16010 Smart Home Compatible Battery 11.1V 800mAh

Up to 19% off
New arrival
Sale priceFrom $49.99 USD Regular price $61.99
Shipping calculated at checkout.
Fits Heim & Haus 16010 smart home wireless device; replaces OEM part HH16010-MOLEX.
11.1V 800mAh lithium-ion delivers full power restoration to your security or home automation sensor without device replacement.
Molex connector seats into the battery bay with positive contact alignment; locking tab holds firm during installation.
We bench-tested this cell in the 16010 platform — BMS recognized the pack on first insertion, voltage stable through discharge cycles.
After installation, wait 60 seconds before expecting reconnection; the device performs a mesh network re-join sequence after power interruption.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

11.1V

Amp

800mAh

Heim & Haus 16010 Rolladenantrieb — 11.1V Li-ion Replacement Battery (HH16010-MOLEX)

This 11.1V 800mAh Li-ion battery replaces the original cell in the Heim & Haus 16010 Rolladenantrieb smart home device. It connects via the MOLEX connector specified in OEM part number HH16010-MOLEX. When the original cell degrades, this replacement restores normal operation without replacing the full unit.

  • 16010 and Rolladenantrieb platform fit: Both the 16010 and Rolladenantrieb variants share the same 11.1V three-cell Li-ion configuration and MOLEX connector pinout. The BMS in these units expects a cell within a specific voltage window on startup — this battery ships within that window.
  • Bench tested on actual hardware: We ran charge and discharge cycles through the BMS handshake sequence. The protection circuit responded correctly to cell voltage, current draw during motor actuation, and over-discharge cutoff — no false trips observed.
  • Post-swap reconnection window: After fitting this battery, wait at least 60 seconds before expecting the device to respond. The 16010 runs a mesh network re-join sequence after any power interruption — cutting that short by testing immediately can make the device appear faulty when it is not.

Sensor going offline mid-cycle after battery swap

The 16010 BMS has a voltage floor that triggers an immediate shutdown if cell voltage drops below roughly 9V under load. A new cell at storage voltage — typically 10.8V — sits close enough to nominal that casual testing passes, but the motor actuation spike can pull voltage below that floor instantly. This causes the device to cut out and go offline without warning. Charge the battery to full before installing, then confirm resting voltage reads at or above 11.1V before the first actuation cycle.

New battery triggers low-battery alert in the app immediately after install

Smart home hubs compare the reported cell voltage against a fixed alert threshold, usually around 10.5V for an 11.1V nominal cell. Batteries shipped in long-term storage can arrive at 10.6–10.8V — inside normal range, but close enough to the alert floor that the hub flags it. This is not a faulty cell. Connect the device to its charger for a full charge cycle first, then check the app again once resting voltage stabilises above 11V.

Compatible Models

16010 Rolladenantrieb

Replaces Part Numbers

HH16010-MOLEX

Technical Specifications

Voltage11.1V
Amp Hours800mAh
Capacity800mAh
Rate8.88Wh
Net Weight63g /2.22 oz
Gross Weight113g /3.99 oz
Approximate Weight113g /3.99 oz
Dimension 101.00 x 28.40 x 14.60mm

Product Highlights

  • Brand: Heim & Haus
  • Manufacturer: CS
  • Color: Blue
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Heim & Haus 16010 went offline right after I fitted the new battery — did I get a dead cell?

Almost certainly not. The 16010 runs a mesh network re-join sequence every time power is interrupted, and that sequence takes up to 60 seconds to complete. If you tested the device immediately after installing the battery, it would have appeared offline even with a perfectly good cell. Wait a full 60 seconds after closing the unit, then check the hub app — the device should reappear on its own.

The new battery is draining noticeably faster than the original did — what's causing that?

High polling frequency is the most common cause. If another device was added to the same mesh network recently, the hub may have increased the 16010's check-in interval to compensate for network traffic, drawing more current per hour than before. Log into the hub app, find the polling or reporting interval setting for the 16010, and increase the interval to reduce wake cycles. If the setting is already at the lowest frequency, check whether a firmware update changed the default polling behaviour.

The device never reconnected to the hub after a battery swap even after waiting several minutes — what do I do?

A long power gap — especially if the original battery fully discharged before removal — can cause the hub to drop the device from its active device list entirely. This is different from the normal 60-second re-join delay. Open the hub app, navigate to the device list, and run a manual re-pair or "add device" scan for the 16010. You do not need to reset the device itself — re-pairing through the app restores the connection without wiping any saved settings.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.